• 제목/요약/키워드: 3D CAD system

검색결과 592건 처리시간 0.034초

머시닝센터에서 볼 엔드밀가공으로 고능률, 고정밀도 제고를 위한 표면가공 조건 (Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball Endmill on a Machining Center)

  • 윤종학
    • 한국생산제조학회지
    • /
    • 제7권3호
    • /
    • pp.99-103
    • /
    • 1998
  • The curved surface machined by plate end mill causes a excess non-cutting volume, in these cases ball end mill is used for the curved surfaces. This study is aimed to obtain the optimum cutting conditions of various cutting speed, table speed, tool diameter, radius of curvature roughness on the conditions of various cutting speed, tool diameter, radius of curvature when machining the curved surface using the ball end mill. After designing curve rates, obtaining NC data by CAD/CAM system through CC-Cartesian method and transferred the data through DNC system, we machined the specimens by the CNC machining center, The surface roughness of specimens was measured by surface roughness tester and CNC 3D coordinate measuring machine. The cutting condition were the same as follow velocity; 15, 20, 25 30m/min, feed rate;40, 60, 80, 100m/min and radius of curvature; 30,40,50,60mm, tool diameters; ø8, ø12, ø16, ø 20mm. Analizing the working results, we can acquire the optimum cutting condition of curved specimen at the cutting velocity of 20~25m/min and the feed rate of 80mm/min. As the same cutting condition the best surface roughness was showed at ø16mm of the tool diameter. But the tool diameter was smaller than ø8mm. we could improve for the surface roughness by controlling the cusp.

  • PDF

Evaluation of functional suitable digital complete denture system based on 3D printing technology

  • Deng, Kehui;Chen, Hu;Wang, Yong;Zhou, Yongsheng;Sun, Yuchun
    • The Journal of Advanced Prosthodontics
    • /
    • 제13권6호
    • /
    • pp.361-372
    • /
    • 2021
  • PURPOSE. To improve the clinical effects of complete denture use and simplify its clinical application, a digital complete denture restoration workflow (Functional Suitable Digital Complete Denture System, FSD) was proposed and preliminary clinical evaluation was done. MATERIALS AND METHODS. Forty edentulous patients were enrolled, of which half were treated by a prosthodontic chief physician, and the others were treated by a postgraduate student. Based on the primary impression and jaw relation obtained at the first visit, diagnostic denture was designed and printed to create a definitive impression, jaw relation, and esthetic confirmation at the second visit. A redesigned complete denture was printed as a mold to fabricate final denture that was delivered at the third visit. To evaluate accuracy of impression made by diagnostic denture, the final denture was used as a tray to make impression, and 3D comparison was used to analyze their difference. To evaluate the clinical effect of FSD, visual analogue scores (VAS) were determined by both dentists and patients. RESULTS. Two visits were reduced before denture delivery. The RMS values of 3D comparison between the impression made via diagnostic dentures and the final dentures were 0.165 ± 0.033 mm in the upper jaw and 0.139 ± 0.031 mm in the lower jaw. VAS ratings were between 8.5 and 9.6 in the chief physician group, while 7.7 and 9.5 in the student group; there was no statistical difference between the two groups. CONCLUSION. FSD can simplify the complete denture restoration process and reduce the number of visits. The accuracy of impressions made by diagnostic dentures was acceptable in clinic. The VASs of both dentists and patients were satisfied.

(dl)-2-Benzyl-4-ethylester-5-(p-methylphenyl)-3H,5H,6H-1,2,6-thiadiazine-1,1-dioxide, $C_{20}H_{22}N_2O_4S$의 結晶 및 分子構造 (The Crystal and Molecular Structure of (dl)-2-Benzyl-4-ethylester-5-(p-methylphenyl)-3H,5H,6H-1,2,6-thiadiazine-1,1-dioxide, $C_{20}H_{22}N_2O_4S$)

  • 신현소;김의성;송현;이채호
    • 대한화학회지
    • /
    • 제39권5호
    • /
    • pp.344-349
    • /
    • 1995
  • (d I)-2-Benzyl-4-ethyl-ester-5-(p-methylphenyl)-3H,5H,6H-1,2,6-thiadiazine-1,1-dioxide의 결정 및 분자구조를 단결정 X-선 회절법을 이용하여 해석하였다. 결정은 단사정계에 해당하고 공간군은 $P2_1$이며, 단위세포 상수는 $a=8.756(8)\AA$, $b=25.757(2)\AA$, $c=8.628(1)\AA$, $\beta=99.15(4)^{\circ}$이었다. 기타 다른 변수값은 V= 1,921(2) ${\AA}^3$, $T=298^{\circ}K$, $D_C=1.336\;g/cm^3$, ${\mu}=1.54\;cm^{-1}$ 및 Z=4이다. $3{\sigma}(Fο)$ 이상인 2049개의 독립회절반점에 대한 최종 신뢰도 R값은 0.051이었다. 단위세포내에는 결정학적으로 비대칭성인 2개의 독립된 분자가 존재한다. 슬폰기의 배열은 다소 왜곡된 정사면체 구조를 나타내며, N(6)와 N(6')는 각각의 thiadiazine 고리의 최소 자승면으로부터 상당히 이탈된 사실을 알 수 있다. 결정내에서 분자들간에는 2개의 N-H---O형 분자간 수소결합과 van der Waals 힘으로 결합되어 있다.

  • PDF

원자력등급 ESF 공기정화계통 시뮬레이터 제작 및 활용에 관한 연구 (A Study on Construction and Application of Nuclear Grade ESF ACS Simulator)

  • 이숙경;김광신;손순환;송규민;이계우;박정서;홍순준;강선행
    • 방사성폐기물학회지
    • /
    • 제8권4호
    • /
    • pp.319-327
    • /
    • 2010
  • 공학적 안전설비 공기정화계통과 관련된 실험 수행을 위해 원자력등급 ESF 공기정화계통 시뮬레이터를 설계, 제작, 검증하였다. 영광 5,6호기 주제어실 공기정화계통의 공급자 정보, 도면 등을 기준으로 실사를 통해 치수를 확인하여 3D CAD 모델을 작성하였다. 모델과 현장 계통의 실측 유량을 기준으로 CFD 분석을 수행하였다. 공기정화계통으로 유입되는 공기는 $30^{\circ}C$, 유동형태는 균일한 것으로 가정하고, 검사 기록지에 의한 주제어실 ESF 공기정화계통의 유량이 12,986 CFM이고, $610{\times}610mm^2$의 HEPA 필터가 9개 설치되어 있으므로 HEPA 필터 단면를 지나는 유속은 1.83 m/s이다. 주제어실 공기정화계통 모델링시 공기 유동이 흐르지 않는 필터 테두리 지지대를 고려하여 현장과 유사한 유동현상을 모사하였다. 약 8 m/s로 기록된 활성탄 흡착기 하단의 공기유동은 별도의 분석을 통해 7 m/s 이상의 유속이 모사되도록 CFD 분석하였다. 연료건물 비상배기계통 및 비상노심냉각계통 기기실 배기정화계통의 공기정화계통에 대해서도 CFD 분석한 결과, 시뮬레이터의 유속을 조절하면 세가지 ESF 공기정화계통을 모두 모사할 수 있음을 확인하였다. CFD 분석 후 시뮬레이터를 원자력등급으로 제작하였고, 본 실험에 착수하기 전에 공기유동 분포도실험을 통해 시뮬레이터의 신뢰도를 검증하였다. 검증결과 중급 필터를 장착한 상태에서 시뮬레이터의 필터 지지대 부분을 제외한 내부에서 공기유동이 고르게 분포함을 확인하였고, 제작된 시뮬레이터는 Reg. Guide 1.52(Rev.3) 개정 내용 확인을 위한 실험에 사용되었다.

해상풍력 발전단지에 의한 GMDSS MF/HF 대역 전자파 간섭 영향 연구 (Electromagnetic Interference of GMDSS MF/HF Band by Offshore Wind Farm)

  • 오성원;박태용
    • 해양환경안전학회지
    • /
    • 제27권1호
    • /
    • pp.47-52
    • /
    • 2021
  • 최근 국제적으로 신재생 에너지 개발이 활발함에 따라 풍력발전의 비중이 확대되고 있다. 특히 고품질의 풍력자원을 이용하고 소음 피해를 최소화하기 위하여 해안에서 멀리 떨어진 해역에 대규모 풍력단지가 조성되는 추세이다. 해상에 풍력단지가 건설됨에 따라 영해나 영공 감시를 위한 레이더에 간섭을 일으키는 문제 이외에도 해상에서 육상으로 송신하는 조난통신을 간섭하는 지에 대한 분석이 필요하다. 이를 위해서 본 연구에서는 선박에서 MF 또는 HF 대역의 전자파를 송신할 경우, 선박과 육상 기지국 사이에 위치한 해상풍력 발전단지가 송신된 전자파에 대한 간섭 여부를 분석하였다. 이를 위해 대상지역을 수치지형도와 풍력발전기 CAD모델을 활용하여 주변 환경 및 해상풍력 발전단지를 전자기학적으로 모델링하였다. 파장에 비해 광범위한 지역에 대한 전파 분석이므로 고주파 분석기법이 타당하나, 적용할 고주파 분석기법을 주변해역과 지형을 간략화하여 저주파 분석기법으로 먼저 검증하였다. 해상풍력 발전단지 부근에서 송신한 신호에 대해 육상기지국에서 수신한 전력을 분석한 결과, 발전단지가 설치되더라도 거의 동일한 수준으로 전파를 수신할 수 있었다. 이는 풍력발전기가 대형 구조물이기는 하나 타워의 직경은 수 미터에 불과하므로 지향성이 없고 파장이 긴 MF 및 HF 대역에 대해서는 큰 장애물로 작용하지 않기 때문으로 판단된다.

완전무치악 환자에서 디지털 가이드 수술 방식을 이용한 무피판절개 임플란트 식립증례: 증례보고 및 5년 추적관찰 (Flapless implant placement with digital 3D imaging and planning system in fully edentulous patient: A case report and 5-year follow-up)

  • 신미선;백장현
    • 대한치과보철학회지
    • /
    • 제57권3호
    • /
    • pp.312-320
    • /
    • 2019
  • 디지털 방식을 이용한 치과 임플란트 진료에서 가장 주목받는 분야 중 하나가 디지털 소프트웨어와 컴퓨터 단층촬영을 이용하여 수술용 스텐트를 제작, 임플란트를 식립하는 분야이다. 컴퓨터를 이용한 디지털 임플란트 치료계획 시스템과 이를 이용한 수술용 가이드는 예지성과 심미성, 기능성을 갖춘 임플란트의 식립과 수복을 가능하게 한다. 특히 이러한 가이드 수술은 임플란트 수복물의 형태와 기능을 고려한 임플란트의 식립 시 더욱 유리하다. 최근 여러 제조사에서 보철물 제작을 위해 치과용 스캔부터 제작방법까지 다양한 디지털 방식의 제작과정을 제시하고 있다. 이러한 방법들은 정확하고 예지성 있는 예후를 위해 여러 연구자들에 의해 연구되어지고 있으며, 점차 발전하고 있다. 이번 증례는 완전무치악의 여성 환자에서 임플란트 고정성 보철물을 이용한 수복증례이다. 하악은 all-on-four 방식을 적용하여 4개의 임플란트를 식립하였으며, 상악은 이에 기초하여 6개의 임플란트를 식립하였다. 최종보철물에 기초한 임플란트의 식립을 위해 임플란트 수술용 스텐트를 이용하였으며, 환자는 치료 결과에 만족하였으며, 5년 추적관찰 결과, 임플란트와 보철물 모두 안정적으로 유지되고 있다.

쾌속 3차원 조형법을 이용한 시작기술 및 시작금형 (Development of Prototyping and Die/Mold Manufacturing Technology using Rapid Prototyping(SLA))

  • 박근;이상찬;정준호;양동열;윤재륜
    • 대한기계학회논문집A
    • /
    • 제20권5호
    • /
    • pp.1582-1589
    • /
    • 1996
  • Rapid prototyping is a new prototyping technology which produces three dimensional part models directrly from CAD data and has been extensively applied to various manufacturing processes. There are many types of rapid prototyping systems due to their building principles and materials. In this work, Stereolithography Appaaratus(SLA) which is the most widely-used rapid prototyping system is introduced to achieve die/mold technology innovation. For the purpose, the prototyping technology using SLA is developed such that patterns of which shapes are quite complicated are successfully produced with high accuracy. Using these patterns, prototype die/molds are efficientrly manufactured; a turbocharger rotor, a fan and a wheel patterns, prototype die/molds are efficienterly manufactured ; a turbochager rotor, a fan and a wheel pattern are made, and the molds of the investment casting, the injection molding and the die casting are manufactured respectively. The casting products are produced using these molds and it turns out that these methods are quitre effective for manufacturing products of complicated geometry from the viewpoint of efficiency and productivity.

유닛모듈러 기반 도시형 생활주택의 BIM 모델링 프로세스 개발 연구 (The Study on the Developing Process of BIM Modeling for Urban-life-housing Based on Unit Modular)

  • 이창재;임석호
    • KIEAE Journal
    • /
    • 제12권6호
    • /
    • pp.77-84
    • /
    • 2012
  • The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

주얼리용 마스터패턴의 쾌속제작에 관한 연구 (A Study on the Rapid Manufacturing for Jewelry Master Patterns)

  • 주영철;이창훈;송오성
    • 한국산학기술학회논문지
    • /
    • 제3권2호
    • /
    • pp.110-114
    • /
    • 2002
  • 주얼리 제조 공정중 마스터패턴 제조 공정은 전체 제조원가의 20%를 차지하기 때문에 매우 중요한 공정이다. 지금까지는 수작업으로 왁스 패턴을 제작하고 이를 이용하여 석고형을 만들고 석고형으로 마스터 패턴을 제작하는 복잡한 공정을 거쳐 제작하였다. 본 연구는 쾌속조형기를 이용하여 듀라폼 재질의 몰드를 만들고 저융점합금을 이용하여 마스터패턴을 직접 제작하는 새로운 공정을 개발하였다. 듀라폰의 용융진이 190℃ 이므로 용융점 70℃의 Pb-Sn-Bi-Cd 계의 저융점 합금을 주물재료로 이용하여 마스터패턴을 제작하였다.

  • PDF

Computer Aided Innovation 역량이 연구개발역량에 미치는 효과: 국내 중소기업을 대상으로 (The Effects of the Computer Aided Innovation Capabilities on the R&D Capabilities: Focusing on the SMEs of Korea)

  • 심재억;변무장;문효곤;오재인
    • Asia pacific journal of information systems
    • /
    • 제23권3호
    • /
    • pp.25-53
    • /
    • 2013
  • This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.