• 대한기계학회논문집A
• /
• 제39권8호
• /
• pp.773-780
• /
• 2015

적층조형(additive manufacturing, AM)은 액체, 고체 상태인 폴리머, 금속 등의 재료를 층층이 쌓아서 3 차원 형상을 제조하는 기술이다. AM 기술은 제품 개발 초기단계에서 시제품 제작에 주로 사용되었으나, 최근 들어 이를 실제 제품제작에 적용하는 것에 대한 관심이 높아지고 있다. 한편 AM 기술에서 적층방향은 최종성형품의 기계적 물성에 영향을 줄 수 있다. 따라서 본 연구에서는 폴리머 재료를 사용하는 대표적인 AM 기술인 FDM, PolyJet 그리고 SLA 방식으로 제작되는 재료의 기계적 물성을 실험을 통해 파악하여 보았다. 이때 시험편의 형상은 ASTM D 638 을 참고하였고 적층방향을 달리하여 성형하였다. 시험편의 인장시험으로부터 얻은 응력-변형률 선도를 바탕으로 기계적 물성을 조사하였다. 또한 시험편의 파단부를 SEM 촬영하여 물성차이의 결과를 분석하였다.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.121-128
• /
• 2020

Purpose: This study aimed to investigate the effects of the sintering conditions of zirconia core on the adaptability. Methods: Ten specimens of each of commercial brand of zirconia(Razor 1100, U&C international, Seoul, Korea) were made and sintered under three different conditions. Specimens were divided into three subgroup(n=10) and sintered with various total time(1hr, 3hr, 9hr) at the maximum temperature(1500℃). The digitized data was superimposed with 3D inspection software to quantitatively obtain the adaptation of a zirconia core, and visual differences were confirmed with a color map. The root mean square(RMS) values of group were statistically analyzed with one-way ANOVA(α=0.05). Results: The overall adaptation of the zirconia cores were as follows; ss-1hr: 36.18±5.2㎛, ss-3hr: 39.55±3.9㎛, cs-9hr: 46.62±4.3㎛. They were statistically significant differences between groups for adaptation(p<0.05). Conclusion: Based on the results of this study, it could be considered that sintering condition of 1500℃ and 1~3 hour is recommended for the better marginal and internal fit. Speed sintering can be widely utilized to fabricate zirconia prothesis as the properties of those almost are to dentistry uses.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.160-171
• /
• 2021

Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.102-115
• /
• 2015

Due to the diversification of lifestyles and the rapid growth of Internet environments since the 1990s, mass customization has been recently accepted as an important trend in the area of clothing and all other areas. In response to mass customized clothing products, global clothing product brands are introducing systems for mass customization such as the application of digital fashion systems that introduced IT technologies such as CAD and 3D scanners. However, studies of planning factors for clothing products applied with digital fashion systems in the area of mass production of clothing products are insufficient. Therefore, this study was intended to analyze the lifestyles of 20-30s that are expected to have the highest demand for clothing applied with digital fashion systems and present basic planning factors according to lifestyles. Through the analysis, three groups that have one of fashion pursuing type, sensory information pursuing type, and practical function pursuing type lifestyles were derived. Based on this result, consumer demand for digital fashion systems and basic factors for product planning were analyzed to present basic planning factors for digital fashion system based customized clothing by lifestyle group. This study is meaningful in that it provided basic data for product planning through digital fashion systems by analyzing the awareness, preference, necessity, and planning factors of digital fashion systems through the analysis of lifestyle types.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.137-143
• /
• 1993

The tetranuclear heterometallic complex CpMo$Os_3(CO)_{10}({\mu]-H)2[{\mu}3-{\eta}^2-C(O)CH_2Tol]\;(1,\;Cp={\eta}^5-C_5H_5,\;Tol=p-C_6H_4Me)$ has been examined by variable-temperature $^{13}$C-NMR spectroscopy and by a full three-dimensional X-ray structual analysis. Complex 1 crystallizes in the orthorhombic space group Pna2$_1$ with a = 12.960(1) ${\AA}$, b = 11.255(l) ${\AA}$, c = 38.569(10)${\AA}$, V = 5626(2) ${\AA}^3$ and ${\rho}$(calcd) = 2.71 gcm$^{-3}$ for Z = 8 and molecular weight 1146.9. Diffraction data were collectedon a CAD4 diffractometer, and the structure was refined to $R_F$ = 9.7% and $R_{W^F}$ = 9.9% for 2530 data (MoK${\alpha}$ radiation). There are two essentially equivalent molecules in the crystallographic asymmetric unit. The tetranuclear molecule contains a triangulated rhomboidal arrangement of metal atoms with Os(2) and Mo at the two bridgehead positions. The metal framework is planar; the dihedral angle between Os(l)-Os(2)-Mo and Os(3)-Os(2)-Mo planes is 180$^{\circ}$. A triply bridging (${\mu}_3,\;{\eta}^2$) acyl ligand lies above the Os(l)-Os(2)-Mo plane; the oxygen atom spans the two bridgehead positions, while the carbon atom spans one bridgehead position and an acute apical position. The molecular architecture is completed by an ${\eta}^5$-cyclopentadienyl ligand and a semi-triply bridging carbonyl ligand on the molybdenum atom, and nine terminal carbonyl ligands-four on Os(3), three on Os(l), and two on Os(2). The two hydride ligands are inferred to occupy the Os(l)-Os(2) and Mo-Os(3) edges from structural and NMR data.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.550-559
• /
• 2000

One of the most important factor to be considered for the analysis of sheet metal forming processes is the tool surface description for arbitrarily- shaped sheet metal parts. In the present study , finite element approach is used to describe the arbitrarily shaped tool surface. In finite element mesh approach, tool surfaces ar, described by finite elements. The finite elements mesh description of the tool surface, which is originally described by CAD data, needs much time and time-consuming graphic operation. The method, however, has been widely used to describe a complex tool surface. In the present study, the contact searching algorithm for the finite element mesh approach is developed based on cell strategy method and sheet surface normal scheme. For the verification purpose, a clover cup drawing, Baden-Baden oilpan problem and a trunk floor drawing were investigated. The computational results based on the finite element approach were compared with the results of available parametric patch approach and experiments.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.14-21
• /
• 2022

In the powder bed fusion (PBF) process, a 3D shape is formed by the continuous stacking of very fine powder layers using computer-aided design (CAD) modeling data, following which laser irradiation can be used to fuse the layers forming the desired product. In this method, the main process parameters for manufacturing the desired 3D products are laser power, laser speed, powder form, powder size, laminated thickness, and laser diameter. Stainless steel (STS) 316L exhibits excellent strength at high temperatures, and is also corrosion resistant. Due to this, it is widely used in various additive manufacturing processes, and in the production of corrosion-resistant components with complicated shapes. In this study, rectangular specimens have been manufactured using STS 316L powder via the PBF process. Further, the effect of heat treatment at 800 ℃ on the microstructure and hardness has been investigated.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.94-105
• /
• 2010

Todays, there is fast transition about the new manufacturing IT methodologies from the conceptual phase into the practical application phase for the strengthening of enterprise competitiveness in manufacturing industry. One of those new methodologies is PLM (Product Life-cycle Management). PLM methodology consists of 3D CAD for the product design, PDM (Product Data Management) for the data management based on the collaboration platform and lastly DM (Digital Manufacturing). DM has evoluted from the stand-alone computer simulation of early 1980s, and now it covers the overall production development and production. Unfortunately, there exist serious critical problems about the actual application of DM for the real work. This is owing to the transition of the point of view from stand-alone type application (such as flow simulation or robot simulation) to that of business process about product development and production management. In this paper, we propose an application framework for the successful project with the digital manufacturing methodology with the concept of Information Strategy Planning, which enables the systematic diagnosis and the quantitative evaluation. Also, we introduce the actual practice of the proposing framework with the ISP project for 'Analysis & Simulation Technique of manufacturing process project' that is being conducted by Chungnam Techno Park.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1217-1222
• /
• 2004

This paper describes the development of tele-robotic interface for the hot-line maintenance robot system. One of main issues in designing human-robot interface for the hot-line maintenance robot system is to plan the control procedure for each part of the robotic system. Another issue is that the actual degree of freedom (DOF) in the hot-line maintenance robot system is much greater than that of available control devices such as joysticks and gloves in the remote-cabin. For this purpose, a virtual simulator, which includes the virtual hot-line maintenance robot system and the environment, is developed in the 3D environment using CAD data. It is assumed that the control operation is done in the remote cabin and the overall work process is observed using the main-camera with 2 DOFs. For the input device, two joysticks, one pedal, two data gloves, and a Head Mounted Display (HMD) with tracker sensor were used. The interface is developed for each control mode. Designed human-interface system is operated using high-level control commands which are intuitive and easy to understand without any special training.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1882-1889
• /
• 2007

Surveying rocks for engineering aims for prediction of geological feature of the construction site. Conventionally, survey information at outcrops and bore holes are projected to the construction sites, such as tunnel and slopes, and rock properties of the sites are predicted by interpretations of specialists. This system, the "Fracjection", aims to assist the specialist for visualization of the projected fractures from borehole and outcrop survey. The Fracjection accepts the BIPS and outcrop survey data to its database and allows plotting them in AutoCad map. The software also reads elevation data from contours of the topographic map and constructs DEM of the construction sites. With user's guide, it generates 3D excavation sites such as slopes and tunnels at the topographic map. The s/w projects borehole and outcrop surveyed fractures onto the modeled excavation surface and allows analysis of failure criteria, such as plane, wedge, and toppling failures by built-in stereonet function. Projected fractures can further be analyzed for structural homogeneities and rock mass quality. Moving window style correlation comparison of stereonet plots are used for formal analyses, and RQD type counts of the projected fractures are adopted for the latter analyses.