• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.435-444
• /
• 2006

This paper investigates the effect of 3-dimensional FE models to evaluation results of jointed concrete pavements which is back-calculated by AREA method. Sensitivity of 3-dimensional FE models developed to simulate the behavior of real jointed concrete pavement are analyzed after compared with 2-dimensional FE models using ILLISLAB. In comparison with 2-dimensional models, influence of concrete contraction under loading plate and base layer on surface deflections is more than that of loading configuration. Deflections at 3-dimensional model between linear and nonlinear temperature distribution under same temperature difference are similar, but noticeable differences are investigated in low elastic modulus of foundations. Dynamic deflections under loading plate are larger than static deflections in high elastic modulus of foundation, but smaller in low elastic modulus. Lower dynamic modulus of subgrade reactions are backcalculated by dynamic deflections than by static deflections. But reverse trend is investigated in the backcalculated elastic modulus of concrete which describes trends of the field backcalculation values calculated from AREA method.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.49-55
• /
• 2017

We investigated the callus induction and plant regeneration ability of 16 maize genotypes, including the Korean inbred lines, using 9 to 15 day-old immature zygotic embryos from maize grown in pots and from field cultures. Immature zygotic embryos placed on MS medium supplemented with L-proline 0.7 g/L, MES 0.5 g/L, Dicamba 1.5 mg/L, 2,4-D 0.5 mg/L, $AgNO_3$ 4 mg/L, and sucrose 20 g/L, showed the highest frequency of callus induction. The highest number of shoots regenerated when the embryogenic callus were transferred to MS medium supplemented with 5 mg/L zeatin. The root formation was observed when shoots were grown on MS medium supplemented with 0.2 mg/L indole-3-butyric acid (IBA). Additionally, under the same culture conditions, immature zygotic embryos from maize grown in the field also had a high frequency of plant regeneration. Except one genotype, 15 genotypes showed callus induction and shoot regeneration. Among the 16 genotypes tested, H99, B98, HW3, and B73 yielded the best plant regeneration. H99 showed maximum shoot formation from the primary embryogenic callus. The results suggest that genotypes and growth conditions of the maize plant plays very important roles for enhancing the embryogenesis competence of immature zygotic embryos. The successful regeneration from immature zygotic embryos of maize inbred lines provides a basis for molecular breeding of new cultivars by genetic transformation.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.391-395
• /
• 2009

Gelidium corneum - gelatin (GCG) blend films containing fermented pollen extract (FPE) were prepared and used as a packaging material of pork loins. Water vapor permeability (WVP) of the film containing FPE was better than the control film, and the film's antimicrobial activity against Escherichia coli O157:H7 and Listeria monocytogenes increased with increasing FPE concentration. Addition of 0.15% FPE decreased the populations of Escherichia coli O157:H7 and Listeria monocytogenes by 2.98 and 3.68 Log CFU/g, respectively, compared to the control. Pork loin samples were inoculated with E. coli O157:H7 and L. monocytogenes and packed with the film. The samples packed with the GCG film containing 0.15% FPE had a decrease in the populations of E. coli O157:H7 and L. monocytogenes by 1.49 and 1.01 Log CFU/g after 4 d of storage, respectively, compared to the control. The results suggested that shelf life of the pork loins could be extended by packaging with the GCG film containing 0.15% FPE.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.79-85
• /
• 2009

Dowel-bar in the jointed concrete pavement has been designed and constructed by Foreign standard and experience in Korea. Timoshenko solution was evaluated for dowel bar design. However, various assumptions, Timoshenko solution evaluated only single dowel bar. Therefore, This study object is evaluated the guide line dowel size and arrangement that using the 3Dimensional Finite Element Method. Dowel bar behavior, Timoshenko solution and 3D FEM estimated used result. Dowel allowable stress and Friberg bearing stress estimated using result. The effects of Dowel Group Action were analyzed using Timoshenko range and Friberg range and 3D FEM.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.98-104
• /
• 2009

The objective of this study was to characterize quality changes of PET-packaged green tea beverage during 4-week storage at $60^{\circ}C$. Changes in oxygen transmission of the PET bottle package and cap removal torque were also examined. MXD6 blend PET bottle showed stability in the gas barrier. Its cap removal torque was kept stable during the 4 weeks. pH, color value, contents of vitamin C and catechin showed significant changes during the storage while caffeine and amino acid did not change significantly. Four alcohol flavor components (hexanol, linalool, menthol, and ${\alpha}$-terpineol) increased rapidly during the first three weeks while d-limonene did not show significant change. Sensory test showed decrease in astringent flavor lowering the product flavor and acceptability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1095-1101
• /
• 2001

Spinach was minimally processed into the unseasoned side dish to be used for Korean food service industry, using the techniques of cook-chill and sous vide. Spinach was blanched at 10$0^{\circ}C$ for 6 minutes, vacuum-packaged in the unit of 500 g by plastic film of low gas permeability, pasteurized at 9$0^{\circ}C$ and then cooled rapidly at 3$^{\circ}C$. The chilled products were then stored at 3 and 1$0^{\circ}C$ with measurement in their quality. Six log cycle (6D) inactivation of Listeria monocytogenes and 13 log (13D) thermal destruction of Streptococcus faecalis were compared as two pasteurization conditions, which corresponded to heating for 22.8 and 30.0 minutes at 9$0^{\circ}C$, respectively. Milder heat processing based on 6D process of L monocytogenes gave better quality of color, texture, ascorbic acid and chlorophyll than the conditions of 13D process of S. faecalis. Any microbial growth in total aerobic, psychrophilic and anaerobic bacteria was not observed until 8 days at 1$0^{\circ}C$ and 14 days at 3$^{\circ}C$, which might be regarded as strict guidelines of shelf life. Storage times based on the changes in physical and chemical quality were longer than those based on strict microbial quality in case of the products pasteurized by 6D process of L. monocytogenes. The seasoned vegetables prepared from sous vide processed spinach were found to be inferior in sensory quality to those from freshly blanched one.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.894-898
• /
• 2007

Now a day, lots of the animations include TV series Animations are made by the technique of 3D Animation. However, 3D Animation obstructs visual elements and deteriorates an acquaintance with the limit of unfamiliar material methods and dispersion of light. For this reason, a large of number of 3D Animations are repacked with the style of 2D Animation. Most of previous studies for the conversion of output 3D Animation to the style of 2D Animation are analysis for 2D rendering techniques. In case of Non-realistic 3D Character Animation, first and foremost it needs investigation of the basic producing method for the 2D Animation is different with the realistic expression way of the one for the 3D animation. For a case study, expression methods for the non-realistic and the non-actuality 2D Character Animation come with impossible ways in the real life. This study for the 3D Animation with the style of 2D Animation is to investigate on the keynote for effective expression methods, when we turn 3D Animation into the style of 2D Animation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.37-37
• /
• 2020

홍띠(Imperata cylindrica 'Rubra') 식물자원의 생장점 부위를 기내 배양하여 기내 식물체 재분화와 재분화식물체의 유전적 안정성을 검토하였다. 기내배양은 26±2 ℃, 25 μmol/m²/s, 14h/10h (day/night) 광조건 하의 배양실에서, MS (Murashige and Skoog, 1962) 기본배지에 생장조절물질을 첨가하여 조직절편체로부터 식물체를 유도하였다. 캘러스는 MS기본배지에 0.1 mg/L의 2,4-D와 2 mg/L의 BA를 혼용처리하여 생장점 부위로부터 유도하였다. 캘러스 증식은 MS기본배지에 0.1 mg/L의 2,4-D를 첨가한 배지에서, 이들 캘러스로부터 신초 재분화는 0.01 mg/L의 NAA 및 2 mg/L의 BA를 첨가한 배지에서 유도하였다. 다경줄기 형성(multiple shooting) 후 MS배지에서 4주 동안 배양한 재분화식물체는 멸균한 상토(버미큘라이트)를 포함한 배양병에서 7주간 배양한 다음 점차적으로 배양병 뚜껑을 개방(1/10 정도 1차 개방 1주일, 3/10 정도 2차 개방 2주일)하여 직경 6 cm의 컵포트에 이식하여 활착시켰다. 재분화식물체는 붉은색이 사라지고 녹색을 나타내었으며, 일부개체에서만 잎의 일부분만 붉은색을 나타냈다. 이는 생장점 주변조직에서 유래한 재분화체가 우세함으로써 생장점보다는 생장점 주변의 조직을 구성하는 녹색층에서 주로 식물체가 재생되는 것으로 판단된다. 이에 따라 홍띠 대조구식물체 8개체, 활착한 녹색 재분화 식물체 20개체(실내 재배중인 순화체 10개체, 2020년 6개월간 포장에서 재배중인 순화체 10개체)를 대상으로 ISSR분석을 실시하여 재분화식물체의 유전적 안정성을 검토하였다. 향후 조직학적 측면에서 신초재분화의 기원에 대한 검토가 필요하다고 사료된다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.265-271
• /
• 1997

The salt accumulation, and chemical properties of 90 samples of the plastic film house soil in the area of Cheongju and Chungju were surveyed. Soil textural distribution of soil samples was 30% for sandy loam, 27% for loam and 43% for silty loam. Percentage distribution of electrical conductivity(EC) of surface soil was 23% below $2dS\;m^{-1}$, 30% for $2{\sim}4dS\;m^{-1}$, 25% for $4{\sim}6dS\;m^{-1}$ and 22% over $6dS\;m^{-1}$. Salt affected soil, which EC was higher than $4dS\;m^{-1}$, covered nearly 50% of all field surveyed. However subsoils(20~30cm) below $2dS\;m^{-1}$ was 68%. Salts in plastic film house soil was accumulated by increasing the cultivation period. After 5 years of cultivation electrical conductivity in plastic house soil was generally higher than $4.47dS\;m^{-1}$ in EC that was 2.8~5.6 times higher than that in the field soil in the outside of plastic film house. As the result of temporary removal of plastic film cover from the house during the rainy summer season, salt content in soil was decreased from $3.54{\sim}7.36dS\;m^{-1}$ to $0.71{\sim}2.92dS\;m^{-1}$ in EC due to the desalinization by runoff and percolating water. Contents of $NO_3-N$, $SO_4-S$ and Cl in plastic film house soil were 2.5. 7.0 and 3.4 times higher than those of open field respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.353-359
• /
• 2015

This study introduces a resource recycling system in urban apartment complex using four different technologies. The four technologies, called 4G, include a production technology for reclaimed water (Green water), a biogas production technology from organic waste (Green biogas), a reuse technology of rainwater (Green rainwater), and urban agropark (Green pyramid). Green water is the technology for producing the reclaimed water from wastewater, rainwater and underground water, and the average concentrations of BOD, SS, T-N and coliform of reclaimed water were 7.8mg/L, ND (not detected), 4.9mg/L and ND, respectively. Green biogas is the technology for producing biogas and effluent after treating organic wastes (e.g. food waste and night soil) discharged from households, and the average production rates of hydrogen and methane were $0.33m^3/m^3/d$ and $0.24m^3/m^3/d$, respectively. Green pyramid, agricultural farm operated by biogas and reclaimed water, provides a healthy and recreational space for residents, and plant growth rates using treated water and reclaimed water showed height of 1.32cm and weight of 112.8g. Therefore, 4G technologies can improve the recycling rate and treatment efficiencies of waste and wastewater in an apartment complex.