• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.189-194
• /
• 2019

Forest investigation is the basic data for forest preservation and forest resource development, and periodical data acquisition and management have been performed. However, most of the current forest investigations in Korea are surveys to grasp the current status of forests, and various applications have not been made as geospatial information. In this study, the unmanned aerial scanner was used to acquire and process data in the forest area and to present an efficient forest survey method through analysis of the results. Unmanned aerial scanners can extract ground below vegetation, effectively creating DEM for forest management. It can be used as geospatial information for forest investigation and management by generating accurate topographical data that is impossible in conventional photogrammetry. It can also be used to measure distances between power lines and vegetation or manage transmission lines in forest areas. The accurate vertical distance measurement for vegetation surveys can greatly improve the accuracy of labor measurement and work efficiency compared to conventional methods. In the future, the use of unmanned aerial scanners will improve the data acquisition efficiency in forest areas, and will contribute to improved accuracy and economic feasibility compared to conventional methods.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.2
• /
• pp.120-132
• /
• 2008

Remotely sensed images from a satellite can be applied for detecting and quantifying spatial and temporal variations in terms of landuse & landcover, crop growth, and disaster for agricultural applications. The purposes of this study were to analyze topography using DEM(digital elevation model) and classify landuse & landcover into 10 classes-paddy field, dry field, forest, bare land, grass & bush, water body, reclaimed land, salt farm, residence & building, and others-using Landsat TM images in North Korea. Elevation was greater than 1,000 meters in the eastern part of North Korea around Ranggang-do where Kaemagowon was located. Pyeongnam and Hwangnam in the western part of North Korea were low in elevation. Topography of North Korea showed typical 'east-high and west-low' landform characteristics. Landcover classification of North Korea using spectral reflectance of multi-temporal Landsat TM images was performed and the statistics of each landcover by administrative district, slope, and agroclimatic zone were calculated in terms of area. Forest areas accounted for 69.6 percent of the whole area while the areas of dry fields and paddy fields were 15.7 percent and 4.2 percent, respectively. Bare land and water body occupied 6.6 percent and 1.6 percent, respectively. Residence & building reached less than 1 percent of the country. Paddy field areas concentrated in the A slope ranged from 0 to 2 percent(greater than 80 percent). The dry field areas were shown in the A slope the most, followed by D, E, C, B, and F slopes. According to the statistics by agroclimatic zone, paddy and dry fields were mainly distributed in the North plain region(N-6) and North western coastal region(N-7). Forest areas were evenly distributed all over the agroclimatic regions. Periodic landcover analysis of North Korea based on remote sensing technique using satellite imagery can produce spatial and temporal statistics information for future landuse management and planning of North Korea.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.199-199
• /
• 2011

유량을 측정하는 수로 중 가장 많이 사용되고 있는 유량 계측 수공구조물은 위어와 파샬플륨이다. 하지만 위어는 직상류부분에 유사가 퇴적되는 단점을 가진 반면, 파샬플륨의 경우 부유사의 침전이 일어나지 않는 장점이 있다. 또한 파샬플륨의 손실수두는 위어의 약 25%에 불과하므로 파샬플륨이 계측수로로써 위어보다 상대적으로 유리하다. 현재 파샬플륨 내 흐름 특성에 관한 연구는 많이 이루어져 있으나 구조물 하류구간에서 발생하는 세굴에 관한 연구는 다소 부족한 실정이다. 따라서 본 연구는 유랑을 측정하는 계측 수공구조물인 파샬플륨의 하류구간 세굴을 수치모의를 통해 검토한 후 이를 바탕으로 물받이 길이를 산정하였다. 수치모의의 적정성 평가를 위해 국제표준화기구(ISO)에서 제시한 ISO No.1에 대해 세굴에 관한 수리모형실험을 실시한 후 수치모의와 비교한 결과 세굴 경향성이 유사하게 나타났다. 파샬플륨 규모별로 하류구간 세굴을 수치모의 한 결과 세굴 경향은 흐름에 따라 크게 4단계로 나뉘었다. 각 단계별로 도수의 위치가 다르며, 이로인하여 세굴 경향이 바뀌는 것으로 나타났다. 특히 도수의 발생 위치가 파샬플륨 내부에서 하류로 이동하면서 세굴심과 세굴 거리가 점차 증가하는 경향을 보였다. 따라서 도수의 발생 위치가 옮겨지기 전 최대 세굴심과 세굴 거리를 이용하여 물받이 길이를 결정하였으며, 도수의 발생 위치를 물받이 위치에 고정시키기 위하여 물받이 형상을 정수지형 물받이로 결정하였다. 산정된 물받이 길이 및 형상의 적정성을 검증하기 위하여 물받이를 ISO No.1에 적용한 후 수치모의를 수행하였다. 수치모의 결과 최대 세굴심은 설치전에 비하여 27.3% 감소하였으며 이에 따라 제시된 물받이는 적정하다고 판단된다. 추후 세굴에 관한 수리모형실험과 수치모의의 결과 비교시 최대세굴심 구간을 제외한 부분의 차이발생의 원인과 다른 형상의 물받이에 관하여 연구를 수행한다면 파샬플륨을 설계시 참고자료로 활용될 수 있을 것이며, 세굴로 인한 파샬플륨의 손상을 방지하는데 기여할 것이라고 기대된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.395-403
• /
• 2000

It is so sensitive that the matter of compensation for private possessions caused in the course of public construction planning is very important. Especially, more logical planning is necessary when the dam be constructed, because it is mainly controlled by the surface of water, and if that planning is made public, artificial change is occurred in land use in that area for the purpose of rising the compensation. In this study, the plan for the application of aerial photo based ortho image was drew up for solving these problems and for the rational, rapid compensation. Ortho image was made by aerial photo, used as reading material for the change in land use. The modeling of drainage basin, came under the planning surface of water, and the 3D simulation were performed for the scene analysis, the change understanding in land use for a lot number in a certain period by overlapping the digital image, the digital land registration map, and the digital topography map as well as the analysis of the admitted land followed by the height of reservoir water.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1058-1062
• /
• 2005

통상 방조제 배수갑문의 방류능력은 위어공식 또는 오리피스공식을 이용하여 산정하는데, 이 경우 지형특성, 배수갑문 형상에 따른 흐름의 간섭현상, 유입부와 유출부의 형상 등이 방류량에 미치는 영향을 고려하지 못한다. 본 연구에서는 도류벽, 배수문, 물받이 등 방조제 배수갑문의 형상과 배치가 방류량에 미치는 영향을 상용 프로그램인 FLOW-3D를 이용하여 정량적으로 해석하였다. 이를 통해 배수갑문의 방류능력과 유황을 개선할 수 있는 방안을 도출하였다. 본 연구에서는 시화조력발전소를 대상으로 배수갑문의 방류능력 개선에 3차원 수치모의가 효과적으로 적용될 수 있음을 보였다. 본 연구에서 도출한 주요 결론은 다음과 같다. 1) 유출부측의 물받이길이를 40 m 증가시킴에 따라 전체 방류량은 계획안에 비해 약 $10\% 증가하는 것으로 나타났다. 2) 물받이 끝과 원지반의 연결부 사면을 1:1에서 1:5의 완경사로 변화시킴에 따라 전체 방류량은 약 $2\%$ 증가하는 것으로 나타났다. 3) 배수문과 수차발전 구조물 사이의 유선형 연결구조물을 제거함에 따라 전체 방류량은 약 $3\%$ 증가하는 것으로 나타났다. 4) 도류벽의 접근각도를 $10^{\circ}$ 감소시키거나 증가시킴에 따라 전체 방류량은 약 $5\% 감소 또는 증가하는 것으로 나타났다. 본 연구는 배수갑문의 설계시 방류능력 개선을 위해서는 수리학적 검토가 필요하며 수치모형실험이 수리모형실험과 더불어 유용한 해석도구로 이용될 수 있음을 보인 것으로, 이후 관련 구조물의 설계시 참고자료로 이용 가능할 것으로 사료된다.다. 실험 결과, Escarameia와 May가 제안한 공식을 더 확장하여 적용할 수 있는 실험 공식으로 개선하였으며 다양한 조건에 대한 실험을 수행하여 보다 정밀한 공식으로 개선할 수 있었다.$10,924m^3/s$ 및 $10,075m^3/s$로서 실험 I의 $2,757m^3/s$에 비해 통수능이 많이 개선되었음을 알 수 있다.함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\

• Journal of the Korean earth science society
• /
• v.31 no.3
• /
• pp.214-224
• /
• 2010

Gravity and Magnetic survey data were analyzed to investigate the geophysical characteristics and regional geological structures of the southwestern Yellow Sea. The set of data about the southwestern part of the Yellow Sea in Korea was one collected by the Korea Ocean Research and Development Institute (KORDI) in 2003, 2004, and 2005. The Yellow Sea has a few basins and the study area also includes parts of the Heuksan Basin and the East China Sea Basin. The bathymetry of the study area ranges from about ?40 m southwestward near China to about 150 m northeastward near Korea. The bathymetry has the gentle rise and fall and the smooth slope. The gravity anomalies, from sea surface gravity and satellite gravity data, reflect the basement rocks rather than the smooth bathymetry. The gravity anomalies are higher on Northeastern part of the study area and lower over the South of the Heuksan Basin. The analytic signal from the Bouguer anomaly shows higher anomalous zones near the boundaries of the basins. The magnetic anomalies and the analytic signal, from the magnetic data, suggest that the complex anomalies on the Northern part are attributed to the volcanic intrusions and that the smooth patterns in the Southern part are based on the lack of the intrusions. The power spectrum analysis of the Bouguer anomalies and the magnetic anomalies indicate that the depth to the Moho discontinuity varies from about 30.2 to 28.3 km and that the depths of the basement rocks and the Eocene discontinuity range from about 8.4 to 8 km and from about 1.5 to 1.7 km, respectively. The inversion of the Bouguer anomaly shows that the Moho depth to the Western part of the study area near China is slightly deeper than the Eastern part near Korea. The result of 2-D gravity modeling has a good coherence with the results of the analytic signal, the power spectrum analysis, and the inversion.

• Journal of Korean Society of Forest Science
• /
• v.113 no.3
• /
• pp.271-281
• /
• 2024

The purpose of this study is to establish baseline data on the habitat status of Dracocephalum argunense Fisch. ex Link by identifying its vegetation structure and correlating environmental factors. A total of 9 vegetation plots (10 m×10 m) were surveyed. Cluster analysis revealed a total of three clusters: Quercus aliena (Group 1), Pinus thunbergii-Rubus parvilolius (Group 2), and Indigofera kirilowii-Zanthoxylum piperitum (Group 3). The importance value of D. argunense was the highest in Group 2, with a value of 6.19. Diversity analysis indicated a range of 2.747-3.166, but differences among the groups was not statistically significant (p>0.05). In the areas surrounding sedimentary rock zones, invasive plants were identified as indicator species, emphasizing the need for monitoring invasive species in the future. Although D. argunense exhibits good adaptability to moisture and atmospheric conditions due to its diverse habitats (forest and coast), there is a risk of decline due to interspecific competition and human activities, as analyzed in this study.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.477-486
• /
• 2012

High-resolution bathymetry and physico-chemical properties of manganese nodules were explored to identify the relationship between morphological features and nodule occurrences in the KR1, one of the Korean contract nodule fields located in the NE Pacific. The high-resolution seabed mapping showed that the southwestern sector of the KR1 (KR1-1) was relatively deeper than the northeastern sector (KR1-2) which is occupied by small-scale seamounts. In terms of nodule occurrence, manganese nodules in the KR1-1 were comparatively larger (2-4 cm) with rough surface (t-type) and discoidal shapes (D-type), while those in the KR1-2 were generally small (<2 cm) with smooth surface (s-type) and irregular shapes (I-type). In addition, the nodules in the KR1-1 had higher contents of Cu, Mn and Ni. Such connections of water depths to nodule appearances and metal contents are commonly observed in the Pacific nodule fields. On the other hand, the nodules in the KR1-2 tend to be controled by morphological features. The seamounts in the KR1-2 might continuously provide rock fragments as new nuclei of manganese nodules. As a result, the nodules could not grow over than 2 cm and showed the shapes of a newbie (i.e., smooth surface and irregular shapes). As a result, our observations indicate that occurrence features of manganese nodules could be subjected to water depths and seabed morphology simultaneously.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.82-93
• /
• 2008

In order to ensure a standardized data analysis of the eddy covariance measurements, Hong and Kim's quality control program has been updated and used to process eddy covariance data measured at two levels on the main flux tower at Gwangneung site from January to May in 2005. The updated program was allowed to remove outliers automatically for $CO_2$ and latent heat fluxes. The flag system consists of four quality groups(G, D, B and M). During the study period, the missing data were about 25% of the total records. About 60% of the good quality data were obtained after the quality control. The number of record in G group was larger at 40m than at 20m. It is due that the level of 20m was within the roughness sublayer where the presence of the canopy influences directly on the character of the turbulence. About 60% of the bad data were due to low wind speed. Energy balance closure at this site was about 40% during the study period. Large imbalance is attributed partly to the combined effects of the neglected heat storage terms, inaccuracy of ground heat flux and advection due to local wind system near the surface. The analysis of wind direction indicates that the frequent occurrence of positive momentum flux was closely associated with mountain valley wind system at this site. The negative $CO_2$ flux at night was examined in terms of averaging time. The results show that when averaging time is larger than 10min, the magnitude of calculated $CO_2$ fluxes increases rapidly, suggesting that the 30min $CO_2$ flux is influenced severely by the mesoscale motion or nonstationarity. A proper choice of averaging time needs to be considered to get accurate turbulent fluxes during nighttime.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.849-858
• /
• 2023

Investigating disaster sites such as earthquakes and landslides involves significant risks due to potential secondary disasters like facility collapse. In situations where direct access is challenging, there is a need to develop methods for safely acquiring high-precision 3D disaster information using light detection and ranging (LiDAR) equipped drone survey systems. In this study, the feasibility of using drone LiDAR in disaster scenarios was examined, focusing on the collapse accident at Jeongja Bridge in Bundang-gu, Seongnam City, in April 2023. High-density point clouds for the accident bridge were collected, and the bridge's 3D terrain information was reconstructed and compared to the measurement performance of 10 ground control points. The results showed horizontal and vertical root mean square error values of 0.032 m and 0.055 m, respectively. Additionally, when compared to a point cloud generated using ground LiDAR for the same target area, a vertical difference of approximately 0.08 m was observed, but overall shapes showed minimal discrepancies. Moreover, in terms of overall data acquisition and processing time, drone LiDAR was found to be more efficient than ground LiDAR. Therefore, the use of drone LiDAR in disaster sites with significant risks allows for safe and rapid onsite investigations.