• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.64-71
• /
• 2012

This is a basic study for recovering original form of Nongsanbyeoleop(農山別業) in Gangjin, Jeonnam, created in the latter part of Joseon period and the estimation of originla form at the time of creation was conducted by analyzing related literature and inspecting the actual site. "Joseokruki(朝夕樓記)" of Dasan Jung, Yak Yong could estimate spatial structure and using form of Nongsanbyeoleop and the arrangement of spatial structure in literature could be confirm by on-the-site inspection. The results of this study are as follows. The first, Nongsanbyeoleop managed spatial factors applying natural topography. For the spatial characteristics of Nongsanbyeoleop, the location of ancestral ritual space including deceased father's tomb and tomb house far from the main levee of Yun, Kwang Taek, a father of Yun, Seo Yu by 1.9km and housekeeping could be confirmed. The second, spatial estimation by "Joseokruki" could be possible. "Joseokruki" describes Joseokru.Youngmojae.Hanokkwan.Cheokyunjung.Sangam as construction factors, Wundang.Kookdan.Nokwunoh. as plant factors, Sookyunggan.Keumkoji.Nokeumjung.Uijanghae as hydroponic factors and Pyoeunkok.Aengjakang as natural topography factors. However, most of them were disappeared and at present, only Youngmojae, Keumgoji, Kukdan and Wundang show the past trace. The third is for the changed space of Nongsanbyeoleop and its reason. The surrounding space of Nongsanbyeoleop was planated by land arrangement in 1960s and it played a role of topographical damage because it's recognized as the plane factor including Nongsanbyeoleop's surrounding landscape rather than dotted factor. The forth, the actual measurement of Nongsanbyeoleop and digitalization of manual map of numerical value are judged to be sufficient to apply as the basic material for recovering garden in the future. Because of the diatahce changing method applied at that time, the garden recovery of Nongsanbyeoleop intended to be concreted and 3D model established by digitalized basic materials is considered to apply for multilateral studying. Thus, Nongsanbyeoleop which is byeolseo including the tomb of deceased father based on the conceptual hyo thought shows clear differences from the organized factors of Byolseowonrim of precedent studies and the importance of Byolseowonrim is sufficient. But, the constructional factors which cannot know disappeared spatial factors and accurate location became the limitation of this study. In the future, clear verification of original form must be progressed by excavation which can confirm the location of construction factors.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2009

In field surveys using the dipole-dipole electrical resistivity method, we often encounter negative apparent resistivity. The term 'negative apparent resistivity' refers to apparent resistivity values with the opposite sign to surrounding data in a pseudosection. Because these negative apparent resistivity values have been regarded as measurement errors, we have discarded the negative apparent resistivity data. Some people have even used negative apparent resistivity data in an inversion process, by taking absolute values of the data. Our field experiments lead us to believe that the main cause for negative apparent resistivity is neither measurement errors nor the influence of self potentials. Furthermore, we also believe that it is not caused by the effects of induced polarization. One possible cause for negative apparent resistivity is the subsurface geological structure. In this study, we provide some numerical examples showing that negative apparent resistivity can arise from geological structures. In numerical examples, we simulate field data using a 3D numerical modelling algorithm, and then extract 2D sections. Our numerical experiments demonstrate that the negative apparent resistivity can be caused by geological structures modelled by U-shaped and crescent-shaped conductive models. Negative apparent resistivity usually occurs when potentials increase with distance from the current electrodes. By plotting the voltage-electrode position curves, we could confirm that when the voltage curves intersect each other, negative apparent resistivity appears. These numerical examples suggest that when we observe negative apparent resistivity in field surveys, we should consider the possibility that the negative apparent resistivity has been caused by geological structure.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.30-35
• /
• 2003

The study of the scars formed on the bark of pine trees damaged by forest fire was carried out in the burned area of Samchuk and Donghae in 2000. Fire scars were formed on the bark of trees when fire passed by the tree. Fire scarring is usually found on the windward and leeward sides of the tree. Fire spread was analyzed topographically using the fire scars formed at the tree stem. Fire spread was closely related to the shape, slope and direction of the forestland. Four fire direction types are classified according to the shapes of the forestland. The height of the fire scar was higher on the leeward side than on the windward side of the trees studied. The burnt area of the total bark of the tree was over 30% in dead trees and below 12% in living trees. The regression model of the burnt stem area using the height of the fire scar, the diameter of breast height and the height of tree was Y=-2.484${\times}$Height＋0.04199${\times}$D.B.H-1.686${\times}$Windward＋11.172${\times}$Leeward＋23.432(r=0.936, F=409.968, P＞0.0001).

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.111-126
• /
• 2017

Small-scale UAS(Fusion technique of Unmanned Aerial Vehicles platform and Sensors, 'sUAS') opens various new applications in construction fields and so becoming progressively common due to the considerable potentials in terms of accuracy, costs and abilities. The purpose of this study is that the investigation of the validation on the utilization of sUAS for earth stockpile volume calculations on sites. For this, generate 3D models(DSM) with sUAS aerial images on an cone shaped soil stockpile approximately $270m{\times}300m{\times}20m$, which located at Baegot Life Park in Siheung-si, compared stockpile volume estimates produced by sUAS image analysis, against volume estimates obtained by GNSS Network-RTK ground surveying method which selected as the criteria of earth stockpile volume. The result through comparison and examination show(demonstrate) that there was under 2% difference between the volume calculated with the GNSS Network RTK data and the sUAV data, especially sUAS imaged-based volume estimate of a stockpile can be greatly simplified, done quickly, and very cost effective over conventional terrestrial survey methods. Therefore, with consideration of various plan to assess the height of vegetation, sUAS image-based application expected very useful both volume estimate and 3D geospatial information extraction in small and medium-sized sites.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.127-136
• /
• 2002

DEM(Digital Elevation Model) is used widely in image processing, water resources, construction, GIS, landscape architecture, telecommunication, military operations and other related areas. And it is used especially in producing ortho-photo based on specific DEM and developing 3D GIS database vividly. As LiDAR(Light and Detection And Ranging) system emerged recently, DEM could be developed in urban area more efficiently and more economically, compared to the conventional DEM Production. Traditional method using check points for elevation has tome limitations in structure's height accuracy by LiDAR, because it uses only terrain height. Accordingly after the downtown of Chungju city was selected as a test field in this paper and DEM and digital ortho images was produced by way of LiDar survey, the accuracy was evaluated through analytical plotting map. The result shows that in case of buildings in LiDAR DEM, the accuracy is 0.30 m in X, 0.62 m in Y and RMS is 1.17 m. The difference distribution between DEM and plotting map in range of $\pm$10 cm was 36.2% and $\pm$10 cm $\pm$20 cm was 43.53%. The accuracy of LiDAR in this study meets 1/5,000 which is the regulation for map of NGI(National Geography Institute) and LiDAR can be possibly used in many other applied area.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.42-58
• /
• 2001

In order to protect the environment from waste disposal activities, the prediction of the flux and flow paths of the contaminants from underground facilities should be assessed as accurately as possible. Especially, the prediction of the pathways and travel times of the nuclides from high level radioactive wastes in a deep repository to biosphere is one of the primary tasks for assessing the ultimate safety and performance of the repository. Since the contaminants are mainly transported with groundwater along the discontinuities developed within rock mass, the characteristics of groundwater flow through discontinuities is important for the prediction of contaminant fates as well as safety assessment of a repository. In this study, the actual fracture network could be effectively generated based on in situ data by separating geometric parameter and hydraulic parameter. The calculated anisotropic hydraulic conductivity was applied to a 3D porous medium model to calculate the path flow and travel time of the large studied area with the consideration of the complex topology in the area. Using the model, the pathways and travel times for groundwater were analyzed. From this study, it was concluded that the suggested techniques and procedures for predicting the pathways and travel times of groundwater from underground facilities to biosphere is acceptable and those can be applied to the safety assessment of a repository for radioactive wastes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.590-590
• /
• 2015

본 연구는 집중호우에 의한 홍수예측 및 소유역의 유출거동에 대한 수문학적 민감성(susceptibility) 규명을 목적으로 강우강도, 지속기간 및 토양포화도 변화에 따른 홍수유출특성을 분석하여 유역의 유출거동 민감성을 표출할 수 있는 노모그래프를 개발하였다. 개별 홍수사상에 대한 유출거동 특성 분석을 위하여 한국건설기술연구원의 대표 시험유역인 설마천 유역의 과거 17년간(1996 ~ 2012)의 10분 간격의 강우량 및 유출량 자료를 수집하여 홍수유출해석을 수행하였다. 설마천 시험유역의 일누가강우량 100mm 이상, 50개 홍수사상에 대한 홍수유출해석은 유역 물순환 해석모형인 CAT(Catchment hydrological cycle Assessment Tool)을 이용하였으며 모의결과를 바탕으로 홍수사상별 지체시간, 강우강도, 지속기간 및 토양포화도 변화에 따른 홍수유출특성을 상세히 분석하였다. 이 중에서도 지체시간은 유역반응을 나타내는 시간변수로서 수문모델링 및 홍수량예측에 매우 중요한 요소이다. 특히, 강우량에 대한 홍수량의 반응이 빠른 소유역의 경우에 홍수량예측에 큰 영향을 미친다. 따라서 강우강도, 지속기간, 토양포화도의 변화량에 대한 지체시간의 거동을 R 프로그래밍 언어 및 3D Surfer를 이용하여 분석한 후 최종적으로 소유역의 홍수유출 특성을 나타내는 3차원 홍수 유출특성 노모그래프를 개발하였다. 분석에 사용된 R 프로그래밍 언어는 통계 계산과 그래픽을 위한 프로그래밍 언어이자 소프트웨어 환경으로 데이터의 조작 및 수치연산, 시각화를 수행할 수 있는 기능을 여러 패키지를 통해 구현할 수 있다. 따라서 본 연구에서는 R을 이용하여 10분 단위의 강우 및 유출량 자료를 1시간 및 1일 자료로 구축하고 17년간의 과거 홍수사상을 분리하여 추출하는 R 홍수유출해석 시스템을 개발하였으며 추출된 홍수사상을 관측 유출량 및 관측 토양수분을 포함하여 시각화함으로써 강우 및 토양수분 변화에 따른 소유역의 유출거동 민감성을 확인할 수 있었다. 분석 결과, 지체시간은 강우지속기간 및 토양포화도에 민감한 거동특성을 나타냈으며 토양포화도는 첨두홍수량의 변화에 민감한 영향을 주는 것으로 확인되었다. 개발된 3차원 홍수유출특성 노모그래프는 유역의 규모 및 지형물리학적 특성에 따라 다양하게 나타날 것으로 판단되며 여러 계측유역에 적용함으로써 유역별 홍수유출 반응특성을 정량화할 필요가 있다. 즉, 강우강도, 지속기간, 지체시간, 포화도 등의 변화에 따른 유역의 홍수유출 반응특성을 규명함으로써 미계측 유역의 홍수량예측 실무에 활용할 수 있을 것으로 판단된다.

• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.25-31
• /
• 2004

To obtain the 3-D coordinates of the urban roads from aerial images, the accurate matching technique in road areas is required. In this paper, we suggest the relational matching method that is performed by comparison of relationships of road pavement markings after they are extracted from aerial images using geometric properties and spatial relationships of the pavement markings. Relational matching requires not only high level description of features but also the solution for inexact matching problems. In addition, it needs a lot of tests for the reliable final result. In this research, we described features as calculating geometric properties of the pavement markings, suggested the solution for inextact matching problems, and performed tests to decide whether the result is acceptable or not, which use the property that road areas are flat. In order to evaluate the accuracy of matching, we made a visual evaluation and compared the result of this technique with those measured by analytical photogrammetry.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.1-22
• /
• 2012

The classification scheme of estuaries can be divided into two categories: qualitative classification based on geomorphic characteristics and quantitative classification based upon the physical properties of water body. While simple and intuitive scheme of the former is difficult to quantify, the latter is not easy to apply due to the lack of data. A classification scheme based on morphological convergence is very promising because it only requires easily accessible data such as width and depth of channels, as well as it can characterize estuaries in terms of tidal propagation. Thus, this paper examines the classification scheme based on estuarine morphological convergence using depth and width data obtained from 19 major Korean estuaries. Morphological convergence for each estuary was estimated with the estuarine length, width and depth data to get the convergence parameters, which includes the degree of funneling ${\nu}$ and the dimensionless estuarine length $y_0$. The transfer function ${\xi}({\nu},ky)$ is then deduced analytically from 1D depth-integrated hydrodynamic momentum equation and continuity equation for estuarine shapes. Tidal response of each estuary is finally calculated using ${\nu}$, $y_0$ and ${\xi}({\nu},ky)$ for comparison and classification. The 19 Korean estuaries were classified into three groups: tidal amplitude-dominated estuaries with standing wave-like tidal response (group 1), current-dominated estuaries with progressive wave-like tidal response (group 2), and the intermediate group (group 3) between groups 1 and 2. The sensitivity analysis revealed that uncertainties in determining the estuarine length can have a critical effect upon the results of classification, which indicates that the reasonable determination of the estuarine length is of critical importance. Once the estuarine length is feasibly determined, depth-convergence can be neglected without any negative effect on the classification scheme, which has an important ramification on the wide applicability of the classification scheme.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.3
• /
• pp.1-8
• /
• 2020

In this study, numerical analysis of debris flow was performed using the SPH (Smoothed Particle Hydrodynamics) technique to analyze the mechanism of debris flow, and the applicability of soil parameters was verified by comparison with previous studies. In addition, after performing aerial photographic survey using a drone, a topographic model was created based on this survey to check the applicability of the site to the valley part of Jagul Mountain basin. And after numerical analysis of debris flow was performed using NFLOW, and the result was compared and analyzed with the existing satellite image based method. As a result of this study, the numerical analysis method using drone image and NFLOW was found to have a higher applicability to predicting the impact of debris flow, because it can reflect the actual topography better than the existing method based on satellite imagery. Therefore, it is considered that this study can be used as basic data to establish the preventive measures for debris flow such as location selection of the eruption control dam.