• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.200-209
• /
• 2022

Providing real-time location information is emerging as a major goal of the national industry. In order to provide such real-time location information (3D spatial information), it is essential to develop a technology for a satellite positioning method. Therefore, the country continues to make efforts to increase satisfaction with the needs of consumers by introducing the Network RTK GNSS method. In this study, among the Network RKT GNSS(Global Navigation Satellite System) methods provided by the National Geographic Information Service, continuous observation and single observation were measured at the integrated reference point using VRS(Virtual Reference Station) and FKP(Flӓachen-Korrektur Parameter) to evaluate accuracy. In addition, we aim to maximize efficiency by presenting accuracy on the rapidly increasing Network RTK GNSS method in the field.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.65-75
• /
• 2005

Moving-objects databases should efficiently support database queries that refer to the trajectories and positions of continuously moving objects. To improve the performance of these queries. an efficient indexing scheme for continuously moving objects is required. To my knowledge, range queries on current positions cannot be handled by the 3D R-tree and the TB-tree. In order to handle range queries on current and past positions. I modified the original 3D R-tree to keep the now tags. Most of spatio-temporal index structures suffer from the fact that they cannot efficiently process range queries past positions of moving objects. To address this issue. we propose an access method, called the Tagged Adaptive 3DR-tree (or just TA3DR-tree), which is based on the original 3D R-tree method. The results of our extensive experiments show that the Tagged Adaptive 3DR-tree outperforms the original 3D R-tree and the TB-tree typically by a big margin.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.325-340
• /
• 2001

This research is to construct more useful Geo-spatial data by building spatial data to three dimensional and utilize the database effectively for development of application, maintenance and management program, and application technology, which is on going based on “Haeundae three dimensional database construction project”. Furthermore, the acquisition of geographic information data and the technological improvement of effective construction would be the important factors to judge the qualitative reputation of GIS. Above all, studies to create accurate data and overcome the error limitation are much more important than any other thing. Final form of Spatial Data to materialize efficient GIS(Geographic Information System) must be three dimensional spatial data which has attribute data, actual concept and numerical value of real world. In connection to that, development is on the move to improve building technique of useful spatial data and digitalize the entire country in cryberspace. $\ulcorner the cyber country lrcorner$is designed to mange the entire country systematically. This simulation would be able to cover administration of government institution, public service, corporate business and even the public life in the cyeberspace though the computer. Materialization of efficient GIS and establishment of condition as technically strong nation through the early realization of $\ulcorner the cyber country lrcorner$will provide a great opportunity to open up the global market with exportation of advanced technology.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.251-252
• /
• 2010

Lately, airborne digital camera and airborne laser scanner in field of airborne surveying is used to build geography information such as DEM generation and terrain analysis. In this study, 3D position accuracy is compared medium format CCD camera RCD105 with high resolution airborne digital camera DMC. For this, test area was decided for aerial photograph and ground control points was selected in 1/1,000 scale digital map. In Result, Root Mean Square Error(RMSE) was analyzed between RCD105 and DMC after aerial triangulation.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.185-198
• /
• 2021

Researches using UAVs are being actively conducted in the field of quickly constructing 3D spatial information in small areas. In this study, without using ground control points, a stereo camera was mounted on a UAV to collect images and quickly construct three-dimensional positions through image matching, bundle adjustment, and the determination of a scale factor. Through the experiment, when bundle adjustment was performed using stereo constraints, the root mean square error was 1.475m, and when absolute orientation was performed in consideration of a scale, it was found to be 0.029m. Through this, it was found that when using the data processing method of a UAV equipped with a stereo camera proposed in this study, high-accuracy 3D spatial information can be constructed without using ground control points.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.76-92
• /
• 2018

This study aimed to establish database of rainfall inundation area by rainfall scenarios and conduct a real time prediction for urban flood mitigation. the data leaded model was developed for the mapping of inundated area with rainfall forecast data provided by korea meteorological agency. for the construction of data leaded model, 1d-2d modeling was applied to Gangnam area, where suffered from severe flooding event including september, 2010. 1d-2d analysis result agree with observed in term of flood depth. flood area and flood occurring report which maintained by NDMS(national disaster management system). The fitness ratio of the NDMS reporting point and 2D flood analysis results was revealed to be 69.5%. Flood forecast chart was created using pre-flooding database. It was analyzed to have 70.3% of fitness in case of flood forecast chart of 70mm, and 72.0% in case of 80mm flood forecast chart. Using the constructed pre-flood area database, it is possible to present flood forecast chart information with rainfall forecast, and it can be used to secure the leading time during flood predictions and warning.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.30-36
• /
• 2008

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we tested of the railway facilities using laser surveying system, then we propose data a generation of spatial images for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation. As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.27-33
• /
• 2004

Recently, as a part of NGIS project, cultural-assets digital map is produced by cultural properties administration and local autonomous entities. Cultural-assets unified GIS(Geographic Information System) is essential to cultural properties managers md other organizations which are executing land related business for appling it at planning stage. With explosive national land developments, it has been obligated to implement surface survey by the cultural properties protection Art. In this paper, the authors used the district of Sachon city and made 3D terrain model using digital map which is made of 1/5000 stale. Moreover, the authors improved to RDBMS(Relational Database Management System) structure and remodeled the existing DB design in detail, and also tried recovery of past sea level, based on researches about the water level of southern area. By recover past sea level. the shell mound, apart from lever is actually near lever at past, and it make sure its nature. The authors suggested to realize shape and kind of remains which have 3D information of accuracy and actualization from surface-surveying to excavation.

• Journal of Internet Computing and Services
• /
• v.19 no.4
• /
• pp.1-6
• /
• 2018

In smart cities, data from various kinds of sensors are collected and processed to provide smart services to the citizens. Noise information services with noise maps using the collected sensor data from various kinds of ubiquitous sensor networks is one of them. This paper presents a research result which generates three dimensional (3D) noise maps in real-time for smart cities. To make a noise map, we have to converge many informal data which include big image data of geographical Information and massive sensor data. Making such a 3D noise map in real-time requires the processing of the stream data from the ubiquitous sensor networks in real-time and the convergence operation in real-time. They are very challenging works. We developed our own methodology for real-time distributed and parallel processing for it and present it in this paper. Further, we developed our own real-time 3D noise map generation system, with the methodology. The system uses open source softwares for it. Here in this paper, we do introduce one of our systems which uses Apache Storm. We did performance evaluation using the developed system. Cloud computing was used for the performance evaluation experiments. It was confirmed that our system was working properly with good performance and the system can produce the 3D noise maps in real-time. The performance evaluation results are given in this paper, as well.