• Electronics and Telecommunications Trends
• /
• v.8 no.4
• /
• pp.68-78
• /
• 1993

1993 년 3 월 CCITT 가 TSS(Telecommunication Standardization Sector) 로 재구성됨에 따라 UPT(Universal Personal Telecommunication) 의 연구 및 표준화가 더욱 가속화될 예정이다. 이러한 추세에 맞추어 국내 및 소내에서도 UPT 에 대한 관심도가 날로 높아가고 있다. 본 고에서는 재구성된 UPT 관련 TSS 조직, TSS SG 11 및 PMG2 UPT 그룹, UPT 연구내용, UPT 발전방향 등을 중심으로 설명하고자 한다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.927-930
• /
• 1998

This paper presents a new method for reconstructing 3 dimensional object model using a zoom camera. The proposed method uses zoom images to find the distance(D) between camera and object. Also the method uses images obtained around the object to find an $angle(\theta)$ between two connected planes of the object. With the D and $\theta,$ we can reconstruct the real sized 3-D model of object with less errors without stereo camera or rangefinder.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.12-20
• /
• 2013

In this paper, a co-planar waveguide(CPW) fed zeroth-order resonant(ZOR) antenna with frequency reconfigurable radiating structures is fabricated and measured. The unit cell of proposed antenna consists of a series metal-insulator-metal(MIM) capacitor and two shunt line inductors which are shorted through the via. The proposed antenna is designed based on a composite right/left-handed(CRLH) transmission line with two unit cells and it has open ended structure in order to radiate electromagnetic energy mainly on the shunt arm. In order to reduce the antenna size and to exhibit a frequency reconfigurable ability using diode switches four straight strips bent by 90 degrees are used as shunt inductors. The total size of fabricated antenna is $0.22{\lambda}_0{\times}0.16{\lambda}_0$ at zeroth-order resonant(ZOR) frequency. The measured maximum gain and bandwidth (VSWR ${\leq}2$) are 3.1 dBi and 56MHz at ZOR frequency of 2.97 GHz, respectively. This type of antenna can be applied to a frequency reconfigurable antenna system with triple bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1337-1342
• /
• 2012

In this paper, we propose a novel reconfigurable antenna that can change the electrical shape of the matching network using RF switches of PIN diodes. The designed antenna operates at two different modes that are Mode 1 (HSDPA band, 2.1~2.2 GHz) and Mode 2(WiBro WiFi band, 2.3~2.5 GHz). The antenna is built on both sides of a polyarcylate substrate. The measured reflection coefficient shows a matching bandwidth of 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz) for Mode 1 and 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz) for Mode 2, and it shows average vertical gains of -4.4 dBi and -4.5 dBi in x-y plane, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1938-1945
• /
• 2001

In this paper, a new scheme for image conversion of the 2D input images into the stereoscopic 3D images by using differential shifting method is proposed. First, the relative depth information is estimated by disparity and occlusion information from the input stereo images and then, each of image objects are segmented by gray-level using the estimated information. Finally, through the differential shifting of the segmented objects according to the horizontal parallax, a stereoscopic 3D image having optimal stereopsis is reconstructed. From some experimental results, it is found that the horizontal disparity can be improved about 1.6dB in PSNR for the reconstructed stereo image using the proposed scheme through comparing to that of the given input image. In the experiment of using the commercial stereo viewer, the reconstructed stereoscopic 3D images, in which each of the segmented objects are horizontally shifted in the range of 4 ∼5 pixels are also found to have the mast improved stereopsis.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.171-180
• /
• 1993

X-ray photoelectron diffraction (XPD) is used to characterize the crystallographically cleaved GaAs(110) surface. By using polar and azimuthal scans of the usual angle-resolved x-ray photoelectron spectroscopy, we get the reconstruction geometry of the clean GaAs(110) surface from the intensity ratio of Ga 3d core-level peaks. The reconstruction parameters are determined by fitting the diffraction pattern with the single scattering cluster (SSC) model, and the results show similar tendencies to those obtained by other techniques.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.185-188
• /
• 2001

본 논문에서는 의복의 2D패턴을 구성하여, 3D모델을 자동생성하는 방법을 제안한다. 먼저, 의복의 2D CAB 패턴으로부터 여러가지 의복 2D모델을 자동생성한 후, 의복 패턴별 2D모델을 붕합(Seaming)하여 3D모델을 생성한다. 봉합과정에서 B-Spline을 이용하여 인체의 굴곡과 의복의 공극을 고려하여 의복착용 후의 3D모델을 재구성하고, Z-buffer를 개량한 저리버퍼를 사용한 선적분을 통하여 3D모델을 구성하고 있다. 이때 의복의 3D 모델의 구조에 따라 부분적으로 의복 표면의 인체가 노출되는 현상을 검색하여( Collision Detection ), 의복 3D 모델을 부분적으로 수정하고 있다. 나아가서, 의복 원단에 대한 텍스처DB를 구축하여 다양한 색상의 의복을 코디할 수 있다.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.339-346
• /
• 2003

In this paper, we propose a new method in which interpolation images are created by using a small number of axiai T2-weighted images instead of using many sectional images for 3D visualization of brain MR images. For image Interpolation, an important part of this process, we first segment a region of interest (ROI) that we wish to apply 3D reconstruction and extract the boundaries of segmented ROIs and MBR information. After the image size of interpolation layer is determined according to the changing rate of MBR size between top slice and bottom slice of segmented ROI, we find the corresponding pixels in segmented ROI images. Then we calculate a pixel's intensity of interpolation image by assigning to each pixel intensity weights detected by cube interpolation method. Finally, 3D reconstruction is accomplished by exploiting feature points and 3D voxels in the created interpolation images.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.142-143
• /
• 2016

본 논문에서는 애니메이션, 드라마, 영화 등 영상으로 제작된 콘텐츠를 OpenGL를 사용하여 3D영상으로 재구성한다. 먼저 현재영상과 이전영상의 움직임의 차이로부터 운동 축적 데이터를 사용하여 모션 깊이맵을 생성한다. 그 깊이맵을 사용하여 OpenGL에서 사용하는 텍스쳐 맵핑으로 영상을 출력하고 3D 영상을 구현하기 위해 좌영상과 우영상을 생성하여 3D 입체영상을 만든다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.71-74
• /
• 2009

The data-flow paradigm has been employed in various application areas. It is particularly useful where large data-streams must be processed, for example in video and audio processing, or for scientific visualization. A video-based 3D reconstruction system should process multiple synchronized video streams. The system exhibits many properties that can be targeted using a data-flow approach that is naturally divided into a sequence of processing tasks. In this paper we introduce our concept to apply the data-flow approach to a multi-video 3D reconstruction system.