• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.727-739
• /
• 1998

The main objectives o reservoir optimal operation can be described as follows : maximization of the benefits through optimal allocation of the limited water resources for various purpose; minimization of t도 costs by the flood damage in potential damaging regions and risk of dam failure, etc. through safe drainage of a bulky volume of excessive water by a proper reservoir operation. Reviewing the past research works related to reservoir operation, we can find that the study on the matter of the former has been extensively carried out in last decades rather than the matter of the latter. This study is focused on developing a methodology of optimal reservoir operation for flood control, and a case study is performed on the Chungju multipurpose reservoir in Korea. The final goal of the study is to establish a reservoir optimal operation system which can search optimal policy to compromise two conflicting objectives: downstream flood damage and dam safety-upstream flood damage. In order to reach the final goal of the study, the following items were studied : (1)validation of hydrological data using HYMOS: (2)establishment of a downstream flood routing model coupling a rainfall-runoff model and SOBEK system for 1-D hydrodynamic flood routing; (3)replication of a flood damage estimation model by a neural network; (4)development of an integrated reservoir optimization module for an optimal operation policy.

• Proceedings of the Korean Society of Tobacco Science Conference
• /
• 1997.10a
• /
• pp.134-152
• /
• 1997

Plant viruses of tobacco including tobacco mosaic virus (TMV) and potato virus Y (PVY) cause severe economic losses in leaf-tobacco production. Cultural practices do not provide sufficient control against the viruses. Use of valuable resistant cultivars is most recommendable for the control of the viruses. However, conventional breeding programs are not always proper for the development of virus-resistant plants mostly owing to the frequent lack of genetic sources and introduction of their unwanted properties. Therefore, we tried to develop virus-resistant tobacco plants by transforming commercial tobacco cultivars, NC 82 and Burley 21, with coat protein (CP) or replicase (Nlb) genes of TMV and PVY necrosis strain (PVY-VN) with or without untranslated region (UTR) and with or without mutation. Each cDNA was cloned and inserted in plant expression vectors with 1 or 2 CaMV 35S promotors, and introduced into tobacco leaf tissues by Agrobacterium tumefaciens LBA 4404. Plants were regenerated in kanamycin-containing MS media. Regenerated plants were tested for resistance to TMV and PVY In these studies, we could obtain a TMV-resistant transgenic line transformed with TMV CP and 6 genetic lines with PVY-VN cDNAs out of 8 CP and replicase genes. In this presentation, resistance rates, verification of gene introduction in resistant plants, stability of resistance through generations, characteristics of viral multiplication and translocation in resistant plants, and resistance responses relative to inoculum potential and to various PVY strains will be shown. Yield and quality of leaf tobacco of a promising resistant tobacco line will be presented.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.300-311
• /
• 2006

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin. Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p < 0.05). There was also no significant difference between the groups with or without mechanical retention (p < 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.77-83
• /
• 2011

One-step dilution and direct transfer would be a practical technique for the field application of frozen embryo. This study was to examine whether Jeju Black Cattle (JBC, Korean Cattle) can be successfully cloned from vitrified and one-tep diluted somatic cell nuclear transfer (SCNT) blastocyst after direct transfer. For vitrification, JBC-SCNT blastocysts were serially exposed in glycerol (G) and ethylene glycol (EG) mixtures [10%, (v/v) G for 5 min., 10% G plus 20% EG (v/v) for 5 min., and 25% G plus 25% EG (v/v) for 30 sec.] which is diluted in 10% FBS added D-PBS. And then SCNT blastocysts were loaded in 0.25 ml mini straw, placed in cold nitrogen vapor for 3 min. and then plunged into $LN_2$. One-step dilution in straw was done in $25^{\circ}C$ water for 1 min, by placing vertically in the state of plugged-end up and down for 0.5 min, respectively. When in vitro developmental capacity of vitrified SCNT blastocyst was examined at 48 h after one-step dilution, hatched rate (56.4%) was slightly lower than that of control group (62.5%). In field trial, when the vitrified-thawed SCNT blastocysts were transferred into uterus of synchronized 5 recipients, a cloned female JBC was delivered by natural birth on day 299 and healthy at present. In addition, when the short tandem repeat marker analysis of the cloned JBC was evaluated, microsatellite loci of 11 numbers was perfectly matched genotype with donor cell (BK94-14). This study suggested that our developed vitrification and one-step dilution technique can be applied effectively on field trial for cloned animal production, which is even no longer in existence.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.221-227
• /
• 1999

Successful cryopreservation of bovine immature oocytes can increase availably of oocytes for the in vitro fertilization or nuclear transfer. However, it was not reported successful development to the blastocyst stage following in vitro fertilization of cryopreserved bovine immature oocytes. The objective of this study was to determine the incidence of survival, meiotic maturation, fertilization and in vitro development of cryopreserved bovine immature by ultra rapid cooling methods. The oocytes were adversely affected by brief exposure to EFS40 solution in electron microscope grids and plunged directly into liquid nitrogen. After such ultra-rapid cooled immature oocytes were warmed, 78% of oocytes were matured to the metaphase II stage, 50% of oocytes were fertilized after insemination, and 5% of oocytes were developed to the blastocyst stage. Different sodium concentration of sodium ion in the freezing medium did not affect survival, maturation, fertilization and in vitro development of cryopreserved oocytes. These results suggested that immature bovine oocytes can be cryopreserved by ultra-rapid cooling methods.

• Journal of Embryo Transfer
• /
• v.21 no.1
• /
• pp.13-20
• /
• 2006

The purpose of this study was to develope the transgenic cattle expressing hFSH into the urine using the nuclear transfer. To produce the interest gene in urine, the specific vector was ligated with hFSH gene undo. maUII promoter. The fetal fibroblast cells (KbFF) were isolated from a 45-day male fetus. The hFSH gene was co-transfected with pcDNA3 (neo) vector to KbFF cells by electroporation. The gene-transfected cells were cultured with G-418 selection medium for 2 weeks. Selected colonies were confirmed by PCR. For nuclear transfer, enucleated bovine oocytes were transferred with hFSH transfected or nontransfected fetal fibroblasts. The cleavage and blastocyst formation rates were significantly lower (p<0.05) in cloned embryos transfected with hFSH gene (68.7% and 15.7%) than in those non-transfected (67.6% and 24.5 %), respectively. Apoptosis analysis showed no difference between hFSH transfected and non-transfected blastocysts (p>0.05). The blastocysts were transfected to 77 (control 24, hFSH 53) recipient cows. Two calves were born (1.9%) following transfer with NT embryos transfected with hFSH gene, but they were confirmed not to be transgenic calves. This result shows that the hFSH colonies were mixed with transfected and non transfected cells. Further research will be needed for selection and establishment of gene transfected cells.

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.125-132
• /
• 2002

This study was conducted to examine the effects of electric stimulation conditions on in vitro developmental ability of procine embryos after somatic cell nuclear transfer, The porcine ear cell was cultured in vifro for confluency in serum-starvation condition (TCM-199＋0.5% FBS) for cell confluency. The zona pellucida of IVM oocytes were partially drilled using laser system. Single somatic cell was individually transferred into the enucleated oocyte. The reconstructed embryos were electrically fused with 0.3M mannitol. After electric fusion, the embryos were activated and cultured in NCSU-23 medium containing 10% FBS at 39$^{\circ}C$, 5% $CO_2$ in air for 6 to 8 days. Nuclear transferred(NT) oocytes which fused at a field strength of 1.90kv/cm showed a higher (P<0.05) fusion rate(49.5%, 50/101) compared to 2.10 kv/cm(25.8%, 24/93) or 2.50kv/cm(30.3%, 27/89). After electric activation, the cleavage rate of NT embryos was 48.0(24/50), 66.6(16/24) and 70.3% (19/27), respectively and these were not different. There was no significant difference in fusion rate by duration and pulse of electric stimulation. In cleavage rate, however, more NT embryos(76.3%, 45/59) cleaved at 60 $\mu$sec twice than other embryos(49.1 to 56.5%) with different conditions of electric stimulation(P<0.05). NT embryos activated at a field strength of 1.50kv/cm showed a higher developmental rate(9.8%, 5/51) than those embryos activated at 1.25kv/cm(0%) or parthenotes(6.4%, 7/109). These results suggest that some factors such as field strength, duration and pulse of electric stimulation could be affected to in vitro developmental ability of nuclear transplanted porcine embryos.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.6
• /
• pp.517-525
• /
• 1992

Background: Since its development by Saiki et al, polymerase chain reaction (PCR) has been very useful in various fields of molecular biology. PCR can be used for the detection of a very small amount of microbial agent, and is especially useful in those patients who are difficult to diagnose microbiologically or serologically. Mycobacterium tuberculosis is a very slowly growing organism and AFB staining frequently shows false negative results, and therefore PCR would be a very rapid, easy, and sensitive diagnostic method for the diagnosis of Mycobacterium tuberculosis. Method: To compare PCR with conventional methods in diagnosing Mycobacterium tuberculosis in sputum, we used sputa of patients who visited or were admitted to Seoul National University Hospital. The amplification targets were 383 base pair DNA, a part of 2520 base pair DNA encoding 65 kD Mycobacterium tuberculosis specific protein (the primers are TB-1, -2), and 123 base pair DNA, a part of IS6110 fragment, which multiple copies are known to exsist PCR one genome (the primers are Sal I-1, -2). We also requested AFB staing and culture to the lab of Seoul National University Hospital with the same sample and compared the results. Results: 1) Using TB-1, -2 primers, PCR was positive in 73.1% (19/26) of culture positive sputa, in 12.5% (1/8) of culture negative. but clinically diagnosed tuberculous sputa, and was negative in all sputa of patients who were clinically diagnosed as non-tuberculous etiology. 2) Using Sal I-I, -2 primers, PCR was positive in 94.1% (32/34) of culture positive sputa, in 23.1% (6/26) of culture negative, but clinically diagnosed tuberculous sputa, and was negative in 87.5% (14/16) of sputa from patients who were clinically diagnosed as non-tuberculous etiology. Conclusion: PCR could be a very rapid, sensitive and specific method for the diagnosis of Mycobacterium tuberculosis in sputa, and further studies should be followed for the development of easier method.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.359-365
• /
• 2006

Background: Arterial grafts have been used to achieve better long-term results for coronary revascularization. Bilateral internal thoracic artery (ITA) grafts have a better results, but it may be not used in some situations such as diabetes and chronic obstructive pulmonary disease (COPD). We evaluated the clinical and angiographic results of composite left internal thoracic artery-radial artery (LITA-RA) Y graft. Material and Method: Between April 2002 and September 2004, 119 patients were enrolled in composite Y graft for coronary bypass surgery. The mean age was $62.6{\pm}8.8$ years old and female was 34.5%. Preoperative cardiac risk factors were as follows: hypertension 43.7%, diabetes 33.6%, smoker 41.2%, and hyperlipidemia 22.7%, There were emergency operation (14), cardiogenic shock (6), left ventricle ejection fraction (LVEF) less than 40% (17), and 17 cases of left main disease. Coronary angiography was done in 35 patients before the hospital discharge. Result: The number of distal anastomoses was $3.1{\pm}0.91$ and three patients (2.52%) died during hospital stay. The off-pump coronary artery bypass (OPCAB) was applied to 79 patients (66.4%). The LITA was anastomosed to left anterior descending system except three cases which was to lateral wall. The radial Y grafts were anastomosed to diagonal branches (4), ramus intermedius (21), obtuse marginal branches (109), posterolateral branches (12), and posterior descending coronary artery (8). Postoperative coronary angiography in 35 patients showed excellent patency rates (LITA 100%, and RA 88.5%; 3 RA grafts which anastomosed to coronary arteries <70% stenosed showed string sign with competitive flow). Conclusion: The LITA-RA Y composite graft provided good early clinical and angiographic results in multivessel coronary revascularization. But it should be cautiously used in selected patients.