• Childhood Kidney Diseases
• /
• v.3 no.2
• /
• pp.232-236
• /
• 1999

IgA 신병증은 사구체 중맥에 IgA가 침착하는 것이 특징적인 질환이며 막성 사구체 신염은 IgG가 사구체 기저막의 상피하에 미만성으로 침착하는 질환이다. 원발성 사구체 질환중 IgA 신병증과 막성 사구체신염은 비교적 흔한 질환이나 전체적인 빈도는 낮은 편으로, 한 환자의 사구체에서 두 질환이 동시에 발생하는 경우는 매우 드물다. IgA 신병증과 막성 사구체신염의 중복 신염은 Doi등이 1983년 원발성 신질환으로서 처음 보고한 이래, 성인에서 20여례가 보고되었다. 저자들은 신증후군이 발생한 환아에서 신생검을 시행한 결과 원발성 신질환으로서 IgA 신병증과 막성 사구체신염의 소견이 동시에 보이는 중복신염의 드문 예를 경험하였기에 보고하는 바이다. 환아는 7세된 남아로 내원 한달 전부터 발생한 전신부종을 주소로 내원하였다. 가족력과 과거력상 특이 소견없었으며, 내원시 이학적 소견상 전신적인 허약감과 안와부종, 복부팽만, 하지의 함요부종이 관찰되었고, 검사소견에서는 WBC $19,800/mm^3$, Hb 14.1g/dL, Platelet $397,000/mm^3$, BUN/Cr 10/0.4mg/dL, protein/albumin 4.43/2.73g/dL, cholesterol 429mg/dL, IgA 85mg/dL, $C_3$ 68.8mg/dL, $C_4$ 13.4mg/dL, ANA(-), ANCA(-), RF(-), HBsAg/Ab(-/-)이었다. 뇨검사에서는 RBC many/HPF, WBC 2-3/HPF, protein ${\le}\;300mg/dL$ 였으며, 24시간 소변 검사상 protein 9.18g/day, Ccr 66.67ml/min의 소견을 보였다. 신생검을 시행한 결과 광학현미경상에서 몇몇 사구체의 분절성 경화와 중맥역의 증식이 관찰되었고, 면역형광현미경검사에서는 IgA(3+)가 과립상으로 미만성 분포를 보이며 중맥역에 침착되어 있고, 미세한 과립상과 위선의 양상으로 IgG(1+)가 모세혈관벽에 침착되어 있었으며, 전자현미경 소견상 중맥역과 모세혈관 기저막 상피하에 소량의 전자 고밀도 침착이 함께 관찰되었다. 환아는 prednisolone을 경구 투여 받았으나 단백뇨와 혈뇨가 지속되어 solumedrol pulse therapy, captopril과 cyclophophamide로 치료 받은 후, 전신 상태 호전되고, 혈뇨가 사라졌으며, 24시간 소변 검사상 단백뇨가 487.5mg/day로 감소하여 외래에서 추적 관찰 중이다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.599-602
• /
• 2009

본 연구는 2006년 3월부터 2007년 2월까지 일개 대학병원에서 출생한 고위험군 신생아 121명을 대상으로 청각선별검사인 자동화 유발이음향방사와 확진검사인 청성뇌유발전위검사를 실시하여 임상양상과 청각장애 발생률, 검사소요 시간에 대해 조사하였다. 결과는 다음과 같다. 1. 청각장애발생률은 전체 고위험군 신생아 121명 중 5명의 신생아가 난청으로 조기에 진단되었다. 2. 난청으로 확진 받은 신생아 5명의 관련 질병을 살펴보면 고빌리루빈혈증 2명, 저체중 1명, 구개열 1명, 다운증후군 1명이었다. 3. 난청으로 확진 받은 신생아 5명의 청력손실정도는 양측 고도난청 1명(70dB), 양측 중도난청 2명(55dB), 편측성 난청 2명으로 나타났다. 4. 검사소요 시간은 선별검사인 유발이음향방사 검사를 실시하는 데 소요된 총 시간의 평균은 $107.5{\pm}65.2$초였고, 확진검사인 청성뇌유발전위 검사를 실시하는 데 소요된 총 시간의 평균은 $1,500{\pm}90.1$초가 소요되었다. 5. 연구를 진행하는 도중 11명의 고위험군 신생아가 이사, 연락처 변경, 경제적 사정으로 추적검사에 참여하지 않았다. 신생아 난청은 다른 질병에 비해 발병률이 높은 선천성 질환으로서 모든 신생아를 대상으로 청각검사를 실시하여 난청의 조기진단에 대한 선별검사의 정착이 필요하다고 생각된다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.15-21
• /
• 2007

We propose a 3D modeling method for surface inspection of non-constant velocity moving object. 1'lie laser lines reflect tile surface curvature. We can acquire 3D surface information by analyzing projected laser lines on object. In this paper, we use multi-line laser to improve the single stripe method and high speed of single frame. Binarization and edge extraction of frame image were proposed for robust laser each line extraction. A new labeling method was used for laser line labeling. We acquired some feature points for image matching from the frame data and juxtaposed the frames data to obtain a 3D shape image. We verified the superiority of proposed method by applying it to inspect container's damages.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.6
• /
• pp.651-655
• /
• 2005

Background : Diagnosing a pulmonary embolism is difficult because its presenting symptoms are nonspecific and there are limitations with all of the objective tests. The D-dimer is known to be a marker of the lysis of intravascular cross-linked fibrin as a result of the activation of the endogenous fibrinolytic pathways, and the D-dimer assay is these an objective method for diagnosing a pulmonary embolism. This study assessed the benefits of the D-dimer test for diagnosing a pulmonary embolism using semiquantitative latex agglutination. Methods : The latex agglutination results of 185 patients were retrospectively reviewed. The D-dimer test was performed at the time a pulmonary embolism was suspected. Ninety patients(group I) were diagnosis with PE through spiral chest CT or a chest CT angiogram, perfusion/ventilation scans, and/or pulmonary angiogram. Ninety-five patients (group II) were found not to have a pulmonary embolism through the above tests. Results : The male to female ratio and mean age in groups I and II was 37:55, and 57 years old to 50:45 and 52 years old, respectively. When the cut off value for a positive D-dimer assay was set to $500{\mu}g$, the sensitivity, positive predictive value, negative predictive value and specificity was 86.7%, 61.4%, 79.3%, and 48.4%, respectively. Conclusion : The semiquantitative latex agglutination method in the D-dimer test has a lower sensitivity and negative predictive value than the well known ELISA test particularly for small emboli. Therefore, this test is not a suitable screening test for excluding a pulmonary embolism.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1109-1118
• /
• 2013

Recently, stereoscopic three-dimensional(S3D) movie and video are becoming globally popular. However, there are some people who could not perceive 3D depth information well. Traditional stereopsia test tools could not analyze the subject's perceived depth accurately. Therefore, it is necessary to have a test tool that accurately measures the degree of perceived depth of subjects. In this paper, we suggested a 3D content depth measuring instrument and produced suitable 3D contents for the instrument. We measured subjects' perceived depth of 3D foreground objects in terms of $+1^{\circ}$, $-1^{\circ}$, $-2^{\circ}$ binocular disparity and compared the measured values with the theoretical values. Measured values were slightly bigger than the theoretical values. Deviation between the measured values and theoretical values increased with extrusion distances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5269-5279
• /
• 2014

The cause of defects in the PCB SMT assembly is mostly solder paste deposits. Conventional inspection methods for solder paste deposits suffer from slow speed, low reliability and high cost. Therefore, this paper proposes a method for calculating the height and region of solder paste on PCB using the 3D profiles without measuring the 2D image. The solder paste region is detected by the phase difference in the measurement points and the average phase on the whole surface of PCB. The high reliable height of the solder paste region is computed by the average of the measurement points' phase with repeatability and reliability. The experimental results revealed improvements of 17% in inspection time and 29% repeatability in the height calculation of the solder paste region, resulting in a high speed and less expensive system.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.371-380
• /
• 2006

This paper utilizing model picture of finished clothes in fashion design field various material (textile fabrics) doing Draping directly can invent new design, and do not produce direction sample or poetic theme width and confirm clothes work to simulation. Also, construct database about model and material image and embodied system that can confirm Mapping result by real time. And propose clothes simulation system to dress to 3D human body model of imagination because using several cloth pieces first by process to do so that can do simulation dressing abstracted poetic theme width to 3D model here. Proposed system creates 3D model who put clothes by physical simulation that do fetters to mass-spring model after read 3D human body model file and 2D foundation pattern file. System of this treatise examines collision between triangle that compose human body model for realistic simulation and triangle that compose clothes and achieved reaction processing. Because number of triangle to compose human body is very much, this collision examination and reaction processing need much times. To solve this problem, treatise that see could create realistic picture by method to diminish collision public prosecutor and reaction processing number, and could dress clothes to imagination human body model within water plant taking advantage of Octree space sharing techniques.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.281-286
• /
• 2010

Purpose: This research provided basic data for refraction by comparing the corrected diopter of trial lens and phoropter. Methods: We compared the corrected diopter of trial lens and phoropter, and analyzed statistical significance and relations of the spherical lens corrected diopter and cylindrical lens corrected diopter according to the types (trial lens and phoropter) of subjective refractive instruments. Also we analyzed statistical significance and relations between cylindrical lens corrected diopter at the astigmatism and the types (trial lens and phoropter) of subjective refractory instruments. Results: When we measured the corrected diopter of simple myopia, the mean value for corrected diopter was S-2.74D using the trial lens and S-2.65D using the phoropter. So the corrected diopter was 0.09D smaller when measured by phoropter. The degree of astigmatism was measured C-0.81D using the trial lens and C-0.77D using the phoropter which showed that the measured value was 0.04D smaller using the phoropter. On correlation analysis between the refractive instruments (trial lens and phoropter) and the corrected diopter, there was significant (p<0.01) strong correlation between refractory machine and corrected spherical diopter (r=0.996) and the correlation between refractory machine and corrected cylindrical diopter was r=0.986 and was also significant (p<0.01). Conclusions: The use of phoropter than trial lens was more desirable when performing refraction on high myopia (simple refractive error, high astigmatism), and when using trial lens, you should consider the vertex distance and the gap between overlapped lenses before prescription.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.3
• /
• pp.62-66
• /
• 2024

A statistical approach to inspection of the 3-D shape of micro solder balls is proposed, where an optical method with spatially arranged LED and specular reflection is used. The reflected image captured by a vision system was analyzed to calculate the relative displacements of LED's in the image. Also, the statistics of displacements for the micro solder balls contained in a captured image are used to detect existing defects, and the usefulness of the proposed method is shown via experiments.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.16-24
• /
• 2001

The purpose of this study was to evaluate the specificity, sensitivity, and diagnostic power of caries activity test using laser fluorescence. The subjects of this study were 50 children of $7\sim9$ years old. Fluorescence from initial carious lesion of teeth illuminated by an argon laser(480nm) was observed and photographed with barrier filter. Visual examination for the dDfFtT rate and Streptococcus mutans colony counting was done to evaluate correlation with caries activity test using laser fluorescence. Data analysis was accomplished by Axelsson's method. The results from the present study can be summarized as follows: 1. There was positive correlation $(\gamma=0.48)$ between laser fluorescence test and Streptococcus mutans count. And also positive correlation $(\gamma=0.39)$ exists between laser fluorescence test and dDfFtT rate (P<0.01). 2. Positive correlation $(\gamma=0.27)$ between Streptococcus mutans colony count and dDfFtT rate was found(P<0.05). 3. When dDfFtT rate was defined to standard testing method, the specificity, senstivity, and diagnostic power of laser fluorescence test were 44.4%, 85.7%, and 87.8%. 4. When dDfFtT rate was defined to standard testing method, the specificity, senstivity, and diagnostic power of S. mutans colony counting were 77.8%, 92.9%, 84.8%. 5. When S. mutans colony counting was defined to standard testing method, sensitivity, specificity and diagnostic power of laser fluorescence test were 40.0%, 84.8%, 95.1%. In regard to above results, laser fluorescence test considered to be accurate and reliable method for determining caries activity because of it's close relationship with caries susceptibility test and caries experience measurements. And it was also considered to be practical because it would be simple, inexpensive, and time saving method.