• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.278-285
• /
• 1991

The authors propose to use the slot system in order to improve of the efficiency for the cambered otter boards. The experiment is divided into 2 parts, one is the efficiency model test, and the other is the visualization model test. The hydrodynamic characteristics of the model otter boards were tested by efficiency model test to measure the shearing, drag force of the models and visualization test using hydrogen bubble method to observe the streak-line and time-line of flow around the models, and milk spout method to observe the separation zone in the wake behind the models. This study tested for 5 models such ad without slot, slot position 0.2C, 0.4C, 0.6C and 0.8C. The results obtained are as follows: \circled1 The maximum C sub(L) of model otter board with slot position 0.6C in attack angle 27$^{\circ}$ was the highest of all models, it's value was 1.59. \circled2 In general, the L/D ratio of the one slot otter boards were 16~28% higher than otter board without slot. \circled3 The slot position 0.6C was better than any other slot position, and it's conformed by visiualization. \circled4 As to the model otter board with slot position 0.6C, flow speed of the back side was faster 1.3 to 1.7 times than in the front side. \circled5 The size of the separated zone in case of the model otter board with 0.6C was smaller than that of any other models.

• Spatial Information Research
• /
• v.21 no.6
• /
• pp.43-55
• /
• 2013

Recently, the research to visualize and to reproduce evacuation situations such as terrorism, the disaster and fire indoor space has been come into the spotlight and designing a model for interior space and reliable analysis through safety evaluation of the life is required. Therefore, this paper aims to develop simulation model which is able to suggest evacuation route guidance and safety analysis by considering the major risk factor of fire in actual building. First of all, we designed 3D-based fire and evacuation model at a subway station building in Incheon and performed fire risk analysis through thermal parameters on the basis of interior materials supplied by Incheon Transit Corporation. In order to evaluate safety of a life, ASET (Available Safe Egress Time), which is the time for occupants to endure without damage, and RSET (Required Safe Egress Time) are calculated through evacuation simulation by Fire Dynamics Simulator. Finally, we can come to the conclusion that a more realistic safety assessment is carried out through indoor space model based on 3-dimension building information and simulation analysis applied by safety guideline for measurement of fire and evacuation risk.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.414-421
• /
• 2024

In this paper, we design and verify a system that can detect piping leakage noise in an environment with significant reverberation and reflection using a multi-channel acoustic sensor module as a technology to prevent major plant accidents caused by leakage. Four-channel microphones arranged in a tetrahedron are designed as a single sensor module to measure three-dimensional sound intensity vectors. In an environment with large effects of reverberation and reflection, the measurement error of each sensor module increases on average, so after placing multiple sensor modules in the field, measurement results showing locations with large errors due to effects such as reflection are excluded. Using the intersection between three-dimensional vectors obtained from several pairs of sensor modules, the coordinates where the sound source is located are estimated, and outliers (e.g., positions estimated to be outside the site, positions estimated to be far from the average position) are detected and excluded among the points. For achieving aforementioned goal, an excluding algorithm by deciding the outliers among the estimated positions was proposed. By visualizing the estimated location coordinates of the leakage sound on the site drawing within 1 second, we construct and verify a system that can detect the location of the leakage sound in real time and enable immediate response. This study is expected to contribute to improving accident response capabilities and ensuring safety in large plants.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.731-738
• /
• 2003

The technique known as proteomics is useful for characterizing the protein expression pattern of a particular tissue or cell type as well as quantitatively identifying differences in the levels of individual proteins. In present study, we carried out the comparative expression patterns of white and red muscles. We used the two-dimensional electrophoresis(2-DE) for analyzing the protein expression. Proteins isolated from porcine white and red muscles were separated by 12% poly-acrylamide gel and then were detected by coomassie blue and silver staining. More than 600 protein spots were detected on each 2-DE gel. By visual analysis of the stained gel, five proteins were identified to be differentially expressed in the white vs red muscle. By database searching based on the molecular weights and pI(isoelectric point) of the five proteins, three of them were found to be most close to troponin I, T and myoglobin. However, further researche is needed for identification and functional analysis of the unidentified proteins. In conclusion, we found five proteins, which are differentially expressed in the white vs red muscle. The functional analysis of the differentially expressed proteins will provide valuable information on biochemical characteristics of the muscle type.

• Proceedings of the Conference
• /
• 2005.06a
• /
• pp.33-45
• /
• 2005

현재 지역산업진흥계획이 수립되기까지 수도권 억제와 지역경제 활성화를 위한 다양한 정책 및 법령들이 수립${\sim}$제정되어 왔으나, 그 성과는 미흡하였고, 첨단산업과 지역의 발전을 함께 추구한 과학기술 집적지 조성정책도 연구기관과 산업체간의 기술개발에 대한 수급의 불일치, 지역별 특성화와 차별화 미흡, 사업간 연계성 부족 등으로 성과는 미약하였다. 중앙 부처에서 다양한 지역산업 관련 기술개발 지원사업도 전개해 왔으나, 부처별로 독자적으로 사업을 추진하여, 정책 상호간의 연계성이 부족하고 투자 효율성이 저조하여, 산업자원부에서 산업발전법에 근거하여 2002년 '지역산업진흥계획'을 수립하였다. 이 계획은 지역별 전략산업을 중심으로 한 지역혁신체제 구축에 초점을 두고 있으며, 지역의 내생적 성장을 위한 네트워크 형성, 투입요소 증대에서 지역 산업경쟁력 강화로의 전환, 중앙정부와 지자체의 공동 계획입안 등에서 기존의 정책들과 차이를 보인다. 지역산업정책의 최종목표는 '지역균형발전'이며, 중간목표는 '지역산업의 활성화'라고 할 수 있다. '지역산업의 활성화'를 위한 기본전략으로 '3개 권역별 전략산업 집중 육성'과 '제도적 기반 구축'을 제시하고 있다. 이러한 기본전략은 매우 포괄적이어서 정책수단으로 보기에는 무리가 있다. 따라서 이러한 기본전략 하에 추진하고자하는 사업들을 검토하고 평가의 목적에 맞게 유형화함으로써 동지역균형발전과 지역경쟁력의 강화이며, 그 기본전략으로는 지자체의 역할제고를 바탕으로 한 전략산업 중심의 지역혁신체제(Regional Innovation System : RIS) 구축을 제안하고 있다. 지역 내에서는 각 조직 간의 역할분담이나 연계가 이루어지지 않아 인력과 재원 및 특정분야에 대한 중복투자 문제가 지적되고 있으며 각각 소규모여서 규모의 경제효과를 꾀할 수 없고 경제적 효과가 가시화되는 데에는 오랜 시일이 걸리고 있고, 지역의 산업발전을 체계적으로 기획하고 지역내 다양한 이해관계를 조정하는 총괄 추진기구가 없어 효율적인 지역산업육성에 한계가 있었다. 지방정부의 과학기술예산 및 전담조직, 산업경제예산 및 전담 조직의 부족과 미 정착으로 독자적인 지역과학기술정책이나 지역산업정책은 물론이고 지역혁신정책을 수행하기 어려웠으나, 지역의 특성과 잠재력에 맞는 사업을 발굴하여 중앙정부에 건의하고 지역 내 각 프로젝트를 총괄 조정하는 중개자 역할을 지역전략산업기획단이 그 역할을 수행하고 있다. 지역혁신체제의 중심기관으로 중개기관과 협력 프로그램에 의한 플랫폼 구축 및 지역산업발전의 기획${\sim}$조정기구로서, 선진국의 지역발전기구(Regional Development Agency : RDA)인 지역전략산업기획단이 2002년도부터 산업자원부와 9개 시도에 의해 설립되어 지역네트워크의 활성화와 클러스터의 형성 촉진을 하게 되었고 2004년도에는 13개시도로 확대${\sim}$운영되고 있고, 지역특화사업(H/W)과 지역산업기술개발과제(S/W)와 함께 패케지 형태로 지원되며, 주요역할은 크게 지역산업의 정책기획 분야와 평가관리, 지역혁신역량 조사 및 DB구축 등으로 구분된다. 그중에서도 권역별, 지역별, 지역산업진흥사업 육성과 중장기 산업발전계획을 수립하기 위하여 지역혁신역량을 바탕으로 한 지역 Technology Road Map(TRM)작성사업은 전국공통의 1단계 사업으로 실시 ?榮쨉?, 2005년 3월 기준으로 9개 지역(강원, 대전, 충남, 충북, 경북, 울산, 전남, 전북, 제주) 26개 산업분야를 대상으로 23개가 완료된 상황이다. 이를 근거로 한 지역정책과 R&D 과제 및 필요 인프라의 도출이 체계적으로 구축되어 지역산업 발전을 위한 기술역량이 강화될 것이다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.189-196
• /
• 2012

The heavy moderator acts as the ultimate heat-sink in an operating CANDU reactor. HUKINS has been developed to investigate moderator flow patterns. HUKINS consists of a 38.4-mm-thick cylindrical shell with a 0.95 m inner diameter and 88 sus-tubes that produce a total heat of 10 kW. A chemical visualization method was selected to estimate the occurrence of typical moderator flow patterns. Momentum-dominated flow, mixed flow, and buoyancy-dominated flow are detected under conditions of a heat load of 7.7 kW and input mass flow rates of 4, 7, and 11 L/min. The experimental results are similar to the results of a CFD simulation that consisted of approximately 1.9 million grids and was conducted using the k-${\varepsilon}$ turbulence model. Therefore, both the present experiments and simulations using HUKINS, a 1/8-scale model, represent all three important flow patterns expected in the real CANDU6 reference reactor. Thus, it has been demonstrated that HUKINS could be useful in the study of CANDU6 moderator circulation.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.13-24
• /
• 2020

Many countries are actively engaging in the reduction of greenhouse gas emissions, and as part of this effort, gradually reducing the portion of coal power generation and instead increasing the portion of power generations from renewable energy sources and natural gas. Korea is taking a similar policy to expand LNG power generation for the next decade. There is a concern, though, about the policy not being aligned with the domestic industry development, since only a few products are being made in Korea along the LNG power generation industry value chain. Therefore in this paper, we first looked at the current status of the gas turbine and high temperature parts industry used for LNG power generation in Korea, and then looked into the industrial issues and challenges through the analysis of supply chains of the domestic gas turbine industry. Finally, we tried to propose strategies to revitalize and localize the domestic gas turbine and high temperature parts industry. The proposed strategies can be summarized as 1) creation of domestic gas turbine manufacturing ecosystem via construction of gas turbine alliance, 2) strategic R&D support for localization of gas turbine and high temperature parts, and 3) provision of domestic testbeds for technology evaluation and commercialization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.483-490
• /
• 2021

Due to the recent increase in various problems from underground development in urbanized areas, accurate underground facility information management is highly needed. Therefore, in this study, in order to utilize the Integration Map of Underground Goespatial Information in real time on-site, the function of comparing the mutual location of the GPR (Ground Penetration Radar) sensing data and the Integration Map of Underground Goespatial Information, and function of analyze underground facilities, and function of converting surveying data into a shape file through position correction & attribute editing in a 3D space, and the function of submitting the shape file to the Integration Map of Underground Goespatial Information mobile center was defined and developed as a program. In addition, for the on-site application test of the development program, scenarios used at the underground facility real-time survey site and GPR exploration site were derived, and four sites in Seoul were tested to confirm that the use scenario worked properly. Through this, the on-site utilization of the program developed in this study could be confirmed, and it would contribute to the confirmation of the quality of Shape-file and the "update automation" of "Integration Map of Underground Goespatial Information". In addition, it is expected that the development program will be further applied to the Underground Facility Map's Accuracy Improvement Diffusion Project' promoted by the MOLIT (Ministry of Land, Infrastructure, and Transport).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• The Korean Journal of Nuclear Medicine
• /
• v.37 no.3
• /
• pp.162-170
• /
• 2003

The probabilistic anatomical maps are used to localize the functional neuro-images and morphological variability. The quantitative indicator is very important to inquire the anatomical position of an activated legion because functional image data has the low-resolution nature and no inherent anatomical information. Although previously developed MNI probabilistic anatomical map was enough to localize the data, it was not suitable for the Korean brains because of the morphological difference between Occidental and Oriental. In this study, we develop a probabilistic anatomical map for Korean normal brain. Normal 75 blains of T1-weighted spoiled gradient echo magnetic resonance images were acquired on a 1.5-T GESIGNA scanner. Then, a standard brain is selected in the group through a clinician searches a brain of the average property in the Talairach coordinate system. With the standard brain, an anatomist delineates 89 regions of interest (ROI) parcellating cortical and subcortical areas. The parcellated ROIs of the standard are warped and overlapped into each brain by maximizing intensity similarity. And every brain is automatically labeledwith the registered ROIs. Each of the same-labeled region is linearly normalize to the standard brain, and the occurrence of each legion is counted. Finally, 89 probabilistic ROI volumes are generated. This paper presents a probabilistic anatomical map for localizing the functional and structural analysis of Korean normal brain. In the future, we'll develop the group specific probabilistic anatomical maps of OCD and schizophrenia disease.