• The Research Journal of the Costume Culture
• /
• v.22 no.4
• /
• pp.605-618
• /
• 2014

This study aims to compare the ease of men's slim pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The study selected four educational materials and one industrial pattern of slim pants for a total of five items. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing and opacity, and a comparison was performed regarding the clothing pressure when the virtual model was standing and walking. The results of our comparison of the patternmaking for slim pants showed that pattern C pants had the greatest ease on the waist circumference, while B pants showed no ease. The C and E pants also had the most ease on the hip measurement. In the appearance evaluation, A pants received the most favorable results, followed by D, E, B, and C, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem when standing in all pants, so the clothing pressure was high. While walking, the stress appeared to be different for the left and right parts of the body, and the most significant difference was observed on the thigh area.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.347-353
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a suitable basic bodice pattern of Male Sports Athletes by using the 3D virtual twin and virtual garment simulation system. The results were as follows; 1. By using 3D virtual twin and garment simulation, new bodice pattern considered male sports athletes was development. The basic numerical formula were as follows ; surplus of chest girth=9, surplus of back length=1, armhole depth=back length/4+13, half back width=chest girth/5+2.5, front chest width=chest girth/5+3. 2. Wearing test by 3D virtual garment simulation system was useful to evaluate wearing outline, surplus of clothes and garment space. Also it estimated more highly than existing pattern in silhouette and ease amount, confirming that new bodice pattern is appropriate for the male sports athletes. New bodice pattern was evaluated to allow proper space length of chest and waist. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Journal of Fashion Business
• /
• v.17 no.2
• /
• pp.33-45
• /
• 2013

A study using 3D virtual garment simulation is carried out for the evaluation and application on the pants fit for obese women in their age of 20s and 30s. The results are as follows; 5 obese women in their 20s and 30s were selected for the testing 3D body. They showed no significant differences in all items, comparing with the data of 5th Size Korea body dimensions. The average waist circumstance of the subjects' 3D body dimensions was 87.0cm, hip circumstance was 102.4cm, BMI was $27.1kg/m^2$, and their obese body types had similar mean values. Based on the detailed design of ready made pants and the study results of 20~30s obese women preference for pants design, pants of straight silhouette and semi-tight fit which have waist line lowered, no front dart and one back dart, were manufactured with 100% black cotton and cotton spandex mixed fabrics. When comparing the appearances between real garment and virtual garment, the average of the real garment with 100% cotton was 3.70 and the virtual garment was 4.05. The average of real garment with cotton spandex mixed fabrics was 3.75 and the virtual garment was 4.06. Therefore, the average of virtual garment was highly evaluated. When comparing the results of evaluating the appearance, there was no significant difference caused by materials between real garment and virtual garment. The expression for the ease of virtual garment and real garment was also similar for good evaluation. Thus, 3D virtual garment simulation did positively prove its reliability and effect.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.101-111
• /
• 2012

The purpose of this study is to evaluate the differences of visual image on variations in the length and princess line, in a silhouette of a one-piece dress with the application of the 3D Virtual Clothing System known as i-designer. Eight sample were examined: 2 variations of the length and 2 variations of the princess line, 2 variations of the form of a silhouette. The data was obtained from 66 fashion design majors. The data was assessed by a t-test and a multi-way ANOVA and factor analysis. The results were as follows; The visual image according to the design variables, four factors were selected; the attractiveness factor, the activeness factor, the practicality factor, the elegance factor. In these factors, the attractiveness factor is estimated by the most important factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the activeness factor, a significant difference was noted in the two-way interaction between the length and the princess line, the length and the silhouette. In the elegance factor, a significant difference was noted in the two-way interaction between the length and the silhouette. However, the influence on three-way interaction among the length, the princess line, and the silhouette was not significant.

• The Research Journal of the Costume Culture
• /
• v.31 no.6
• /
• pp.793-805
• /
• 2023

This study analyzes the body shapes of lower-body obese female adolescents and proposes a slacks pattern suitable for their body type. Lower-body obesity is a prevalent type of teenage obesity, and our proposals aim to improve consumer satisfaction in ready-to-wear clothes across this demographic. We first observe characteristics of obese lower bodies, noting significantly above-average thigh and hip circumference. These figures indicate a high degree of curvature in obese lower bodies, along with a large drop value. Leveraging this data, we develop a novel slacks pattern using 3D avatars in a virtual simulation system. The formulas for the main areas of the pattern are as follows: front waist girth W/4+0.75cm+0.5cm, back waist girth W/4+0.5cm-0.5cm, front hip girth H/4+1.25cm-0.5cm, back hip girth H/4+2cm+0.5cm, front crotch extension H/16+0.5cm, back crotch extension H/8+1cm. Results from appearance evaluations show that this pattern minimizes strain rate on the waist and hips, and its average score is significantly higher than that of an alternative pattern that was also evaluated. The minimized strain rate and high average score indicate that our pattern assigns a sufficient amount of space to the appropriate areas. Based on these results, we expect our research to inform slacks pattern development and production for obese consumers of all types.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.161-173
• /
• 2010

This study aims to examine for efficient production methods of custom-tailored clothing and application of 3D virtual clothing system in custom-tailored clothing market, by producing and analyzing both real clothing and 3D virtual clothing. For this study, a middle-aged woman is selected as the subject figure and one-piece is selected as the experimental clothes item. In real clothing, I conducted the wearing evaluation for experts and the subject figure. And In the virtual clothing, I conducted the wearing evaluation with i-Designer using 3D virtual clothing on simulation program. There are some differences between the data from body scanning and the real body size. In the custom-tailored clothing market in which the fitness is important, the research which measures the more exact data is needed. And in the case of complicate design, the functions which measure the activity and the fitness variously and correct the parts of curves are needed. This study experiments the availability of application of 3D Virtual Clothing System in custom-tailored clothing market by selecting one-piece as the experimental clothes item. So the follow-up studies for the other designs and fabrics are needed. Also, if the studies for checking the clothes pressure, the amount of composure, the space between skin and clothing when the virtual model wearing clothes is walking or shaking his arms are proceeding, then 3D virtual clothing System is applicable in custom-tailored clothing market. But there are some restrictions and lack of education in virtual clothing System yet, and it makes hard for workers in clothing market to use it in real production. However, 3D virtual clothing System will be practical in real market if there would be more research on its usability and practicality, and workers in clothing market can be easily educated on techniques of 3D virtual clothing system.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.504-513
• /
• 2013

This study evaluates the difference of visual effect according to pant style and geometric pattern. The researcher made 28 stimuli-combination of four pant Stiles (classic, baggy, skinny, and bell-bottom) and seven geometric pattern (large vertical stripe, small vertical stripe, large horizontal stripe, small horizontal stripe, large check, small check, and hound's tooth check). The test involved 96 female college students. The stimuli were made with the i-Designer computer program. The panels tested the computer screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. Three factors (lower-body compensation, abdomen highlight, and length compensation) influenced the visual effect pant styles and geometric patterns. The skinny style and large vertical stripe evaluated positively in elongated height and leg length and a slimmer overall body. It was shown that the vertical stripe pattern was evaluated as more positive than the horizontal stripe pattern in the visual effect; particularly, the results showed distinct aspects in the classic pants style. The mutual influence of the visual effect (according to pants style and geometric pattern) were indicated as two factors of lower-body compensation and length compensation. A more positive visual effects resulted in a higher mutual influence on pant style and geometric pattern.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.