• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.27-33
• /
• 1999

We have investigated the ultra-low energy B, P, and As ion implantation using upgraded MDRANGE code to study formation of nanometer junction depths. Even at the ultra-low energies simulated in this paper, it was revealed that ion channeling should be carefully considered. It was estimated that ion channelings have much effect on dopant profiles when B ion implant energies were more than 500 eV, P more than 2 keV and As approximately more than 4 keV. When we compared 2-dimensional dopant profiles of 1 keV B with that of tilted one, 2 keV P with tilt, and 5 keV As with tilt, we could find that most channeling cases occurred not lateral directions but depth directions.

• Imaging Science in Dentistry
• /
• v.47 no.1
• /
• pp.11-15
• /
• 2017

Purpose: This study was performed to investigate the intra- and inter-observer variability in linear measurements with axial images obtained by PreXion (PreXion Inc., San Mateo, USA) and i-CAT(Imaging Sciences International, Xoran Technologies Inc., Hatfield, USA) CBCT scanners, with different voxel sizes. Materials and Methods: A cylindrical object made from nylon with radiopaque markers (phantom) was scanned by i-CAT and PreXion 3D devices. For each axial image, measurements were taken twice in the horizontal(distance A-B) and vertical (distance C-D) directions, randomly, with a one-week interval between measurements, by four oral radiologists with five years or more experience in the use of these measuring tools. Results: All of the obtained linear measurements had lower values than those of the phantom. The statistical analysis showed high intra- and inter-observer reliability (p=0.297). Compared to the real measurements, the measurements obtained using the i-CAT device and PreXion tomography, on average, revealed absolute errors ranging from 0.22 to 0.59 mm and from 0.23 to 0.63 mm, respectively. Conclusion: It can be concluded that both scanners are accurate, although the linear measurements are underestimations, with no significant differences between the evaluators.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.635-644
• /
• 2012

In order to design a wave energy generating system, a 6-DOF analysis technique is applied to the three-Dimensional CFD analysis on of a floating body and the behavior is interpreted according to the nature of the incoming wave. A wave period of 5.5s & amplitude of 0.57m from Marado is chosen. 12 case of natural pitching period from 1.25 to 2.8s has been modeled. The relation between tuning factor & pitch angle for the waves generated is compared to analyze the effects of energy absorption variables, namely mass moment of inertia, angular velocity and angular acceleration. From the results obtained, we conclude that model L is the maximum power absorbed, 6kW approximately. A maximum pitch angle of 1.91 degree was attained by Model F, and the maximum displacement of nearly 0.7m was attained by Model L among models D, F and L.

• Journal of The Korean Astronomical Society
• /
• v.41 no.6
• /
• pp.157-161
• /
• 2008

We have estimated the fractal dimension of the molecular clouds associated with the Hii region Sh 156 in the Outer Galaxy. We selected the $^{12}CO$ cube data from the FCRAO CO Survey of the Outer Galaxy. Using a developed code within IRAF, we identified slice-clouds (2-dimensional clouds in velocity-channel maps) with two threshold temperatures to estimate the fractal dimension. With the threshold temperatures of 1.8 K, and 3 K, we identified 317 slice-clouds and 217 slice-clouds, respectively. There seems to be a turn-over location in fractional dimension slope around NP (area; number of pixel) = 40. The fractal dimensions was estimated to be D = $1.5\;{\sim}\;1.53$ for $NP\;{\geq}\;40$, where $P\;{\propto}\;A^{D/2}$ (P is perimeter and A is area), which is slightly larger than other results. The sampling rate (spatial resolution) of observed data must be an important parameter when estimating fractal dimension. Fractal dimension is apparently invariant when varying the threshold temperatures applied to slice-clouds identification.

• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.209-220
• /
• 2008

A methodology for the seismic vulnerability assessment of historical monuments is presented in this paper. The ongoing work has been conducted in Tunisia within the framework of the FP6 European Union project (WIND-CHIME) on the use of appropriate modern seismic protective systems in the conservation of Mediterranean historical buildings in earthquake-prone areas. The case study is the five-century-old Zaouia of Sidi Kassem Djilizi, located downtown Tunis, the capital of Tunisia. Ambient vibration tests were conducted on the case study using a number of force-balance accelerometers placed at selected locations. The Enhanced Frequency Domain Decomposition (EFDD) technique was applied to extract the dynamic characteristics of the monument. A 3-D finite element model was developed and updated to obtain reasonable correlation between experimental and numerical modal properties. The set of parameters selected for the updating consists of the modulus of elasticity in each wall element of the finite element model. Seismic vulnerability assessment of the case study was carried out via three-dimensional time-history dynamic analyses of the structure. Dynamic stresses were computed and damage was evaluated according to a masonry specific plane failure criterion. Statistics on the occurrence, location and type of failure provide a general view for the probable damage level and mode. Results indicate a high vulnerability that confirms the need for intervention and retrofit.

• Journal of the Korean Society of Costume
• /
• v.60 no.5
• /
• pp.117-127
• /
• 2010

In this study, hyperspace is a result of imagination created by means of facts and fiction, represents a transfer to determination and indetermination, and means an extension to an open form. In other words, hyperspace is a high dimensional space expanded to imagination through the combination of the viewpoint on facts in this dimension and fiction. When the 2D plane surface or 3D symmetry is destroyed, or when the frame is twisted or entangled, the non-Euclidean geometry is created eventually. And when the twisting leads to transmutation and the destruction of the form reaches the extreme; this in turn became the twisting like Mbius band. Likewise, the non-Euclidean geometry is co-related to the asymmetry of the Higgs mechanism. When the 'destruction of symmetry' is considered, symmetric theory and asymmetric world can be connected. The asymmetry in turn can maintain balance by arranging the uneven weights at different distances from the shaft. Moreover, at this the concept of the upper, lower, left and right, which was included in the original form, may be crumbled down. The destruction of the symmetry is essential in order to present forecast that coincides with the phenomenon of the real world. Non-Euclidean geometry characteristic is expressed by asymmetry, twists, and deconstruction and its representative characteristic is ambiguity. The boundary between the front, back, upper, lower, inner and outer is unclear, and it is difficult and vague to pinpoint specific location. The design that does not clearly define or determine the direction of wearing costume is indeed the non-oriented design that can be worn without getting restricted by specific direction such as front and back. Non-Euclidean geometry characteristic of hyperspace have been applied to create new shapes through the modification of the substance from traditional clothing of the eastern world to modern fashion. The way of thinking in the 'hyperspace' that used to be expressed in the costumes of the east and the west in the past became the forum for unlimited creation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2949-2954
• /
• 2013

Background: This study was conducted to determine the relationship between lifestyle behavior and quality of life (QoL) among cancer survivors in Korea. Materials and Methods: Data for a total of 471 (173 men, 298 women) cancer survivors (CS) over 40 years old were obtained from the database of the $4^{th}$ Korean National Health and Nutrition Examination Survey (KNHANES IV). An identical number of subjects of the same age, sex, and education who had no restrictions in physical activity were randomly selected from the database and represented the control group (CG). Drinking, smoking, and exercise behavior were assessed. Results: The number of heavy drinkers was lower in CS (9.4%) than in CG (15.8%) (p<0.01); similarly, there were fewer smokers in CS (9.1%) than in CG (14.0%) (p<0.05). The percentage of individuals engaging in vigorous, moderate, and low-intensity exercise did not differ between CS (13.6%, 14.7%, and 50.0%) and CG (14.3%, 13.4%, and 49.7%, respectively). No differences in Euro QoL Questionnaire 5-Dimensional Classification (EQ-5D) scores on both drinking and smoking behaviors were noted. Compared to the non-exercisers, the low-intensity exercisers in CG ($0.91{\pm}0.10$ vs. $0.94{\pm}0.09$), vigorous-intensity exercisers in CS ($0.84{\pm}0.62$ vs. $0.91{\pm}0.11$), and low-intensity exercisers in CS ($0.82{\pm}0.22$ vs. $0.88{\pm}0.13$) scored higher on the EQ-5D. Conclusions: Although cancer survivors practiced more conscious health behavior in drinking and smoking, their engagement in exercise did not differ from that of non-cancer survivors. Since exercise engagement increases QoL in general, implementation of an educational program that promotes exercise engagement in cancer survivors may be required.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.539-548
• /
• 2013

Although Motion estimation (ME) plays an important role in digital video compression, it requires a complicated search procedure to find an optimal motion vector. Multi-view video is obtained by capturing one three-dimensional scene with many cameras at different positions. The computational complexity of motion estimation for Multi-view video coding increases in proportion to the number of cameras. To reduce computational complexity and maintain the image quality, a low complexity motion estimation search method is proposed in this paper. The proposed search method consists of four-grid diamond search patten, two-gird diamond search pattern and TZ 2 Point search pattern. These search patterns exploit the characteristics of the distribution of motion vectors to place the search points. Experiment results show that the speedup improvement of the proposed method over TZ search method (JMVC) can be up to 1.8~4.5 times faster by reducing the computational complexity and the image quality degradation is about to 0.01~0.24 (dB).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.153-159
• /
• 2016

Rivers refer to either natural or artificial structures whose primary functions are flood control and water conservation. Due to recent localized torrential downpours led by climate change, large amounts of eroded soil have been carried away, forming deposits downstream, which in turn degrades the capacity to fulfill these functions. To manage rivers more effectively, we need data on riverbed erosion and deposition. However, environmental factors make it challenging to take measurements in rivers, and data errors tend to prevent researchers from grasping the current state of erosions and deposits. In this context, the aim of the present study is to provide basic data required for river management. To this end, the author made annual measurements with a Real-time Kinematic-Global Positioning System (RTK-GPS) and a total station in Pats Cabin Canyon, Oregon, United States, and also prepared thematic maps of erosion and deposition thickness as well as water depth profiles based on a GIS spatial analysis. Furthermore, the author statistically analyzed the accuracy of three dimensional (3D) measurement points and only used the data that falls within two standard deviations (i.e. ±2σ). In addition, the author determined a threshold for a DEM of Difference (DoD) by installing measurement points in the rivers and taking measurements, and then estimated erosion and deposition thickness within a confidence interval of ±0.1m. Based on the results, the author established reliable data on river depth profiles and thematic maps of erosion and deposition thickness using pre-determined work flows. It is anticipated that the riverbed data can be utilized for effective river management.

• Journal of Educational Research in Mathematics
• /
• v.19 no.1
• /
• pp.143-161
• /
• 2009

This study was designed to gain insights into students' visualization process in geometric problem solving. The visualization model for analysing visual process for geometric problem solving was developed on the base of Duval's study. The subjects of this research are two Grade 9 students and six Grade 10 students. They were given 2D-geometric problems. Their written solutions were analyzed problem is research depicted characteristics of process of visualization of individually. The findings on the students' geometric problem solving process are as follows: In geometric problem solving, visualization provided a significant insight by improving the students' figural apprehension. In particular, the discoursive apprehension and the operative apprehension contributed to recognize relation between the constituent of figures and grasp structure of figure.