• 한국생활과학회지
• /
• 제24권2호
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• 한국멀티미디어학회논문지
• /
• 제18권10호
• /
• pp.1157-1163
• /
• 2015

In this paper, we propose a registration method of 3d facial scan data and CBCT data using voxelization and distance map. First, two data sets are initially aligned by exploiting the voxelization of 3D facial scan data and the information of the center of mass. Second, a skin surface is extracted from 3D CBCT data by segmenting air and skin regions. Third, the positional and rotational differences between two images are accurately aligned by performing the rigid registration for the distance minimization of two skin surfaces. Experimental results showed that proposed registration method correctly aligned 3D facial scan data and CBCT data for ten patients. Our registration method might give useful clinical information for the oral surgery planning and the diagnosis of the treatment effects after an oral surgery.

• 한국정보통신학회논문지
• /
• 제22권6호
• /
• pp.874-880
• /
• 2018

3D 모델링은 건축, 기계, 제품 및 영화영상의 다양한 콘텐츠 제작 등에 폭넓게 활용되고 있으며 첨단 제작기술들이 적용되고 있다. 모델링은 시간이 많이 소요되는 작업으로 이러한 단점을 보완하기 위해서 최근 3D스캐닝 기술을 적용하여 제작기간을 단축시키려는 시도가 활발하다. 소형 오브젝트에 대한 3D스캐닝은 레이저나 광학을 이용하여 직접 데이터를 얻지만 대형의 건물이나 조형물은 고가의 장비가 필요하므로 직접적이 데이터 취득이 힘들다. 본 연구에서는 포토메트리를 이용하여 대형 오브젝트에 대한 3차원 모델링 데이터를 획득한다. 영상 데이터를 획득하기위해 드론을 이용하였으며 조형물과 드론의 일정한 간격유지와 비행 동선에 대한 측정방법을 제시하였다. 또한 획득된 3차원 점군 데이터를 애니메이션에 활용할 수 있는 제작환경과 렌더링 된 애니메이션 결과물을 제시하여 다양한 환경에서 제작할 수 있는 방안을 모색하였다.

• 복식문화연구
• /
• 제12권2호
• /
• pp.290-299
• /
• 2004

The purpose of this study is to testify the pattern making method to develop the men's basic bodice pattern using 3-dimensional body scan data. The experimental patterns were made by adding wearing ease on flattened body scan data and tracing the outlines of it. The experimental bodice pattern were composed of front, back, and side panels. To compare the difference between the experimental pattern and traditional pattern, two pattern making methods were compared. Two sets of basic bodice patterns were made for each of the 10 male subjects: a set of pattern was made by experimental method and the other set was made by Bunka pattern making method. The experimental and traditional patterns were measured at 13 dimensions. The results show that there was a difference between the experimental patterns and traditional patterns at the front length, back length, front width, front neck width, back neck width, and back neck depth. The fit was also compared for both patterns. The results of the fit test show that the experimental patterns were superior to the traditional patterns at the fit of neck, shoulder, and armhole. The experimental pattern making method was expected to be useful for mass customization.

• 한국정보통신학회논문지
• /
• 제22권11호
• /
• pp.1505-1510
• /
• 2018

그래픽스 분야의 제품모델링 제작기술은 급속하게 발전하고 있고 3차원 데이터 응용과 활용성은 계속 증가하고 있다. 제품디자인 제작에 있어 3차원 모델링 제작에는 많은 시간이 소요된다. 최근 역설계 방식은 3D 데이터의 응용과 제작시간단축으로 활용성이 크다. 본 연구는 영상데이터 기반으로 포토메트리를 이용하여 3차원 포인트 클라우드 및 메쉬 데이터를 추출하고 이를 응용하여 제품의 1차 시안을 제작한다. 디자인 수정에 중점을 두어 2차 시안이 제작되었으며 3차 시제품 제작을 위한 3D 프린팅 작업을 진행한다. 이러한 제품디자인 제작과정에서 영상데이터의 활용과 가능성 및 3D 모델링 제작시간의 단축, 효율적인 프로세스를 제시한다. 또한 제품디자인 환경변화에 대응하기 위한 신제품 개발 프로세스 시스템의 모델을 제안한다.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.81-96
• /
• 2012

The purpose of this study is to provide fundamental information for standardization of 3D body measurement. This research analyzes errors occurring in the process of extracting body size from 3D body scan data. First, as a result of analyzing basic state of the 3D body scanner's calibration, the point number of each section was almost the same, while the right and left as well as the front and back coordinates of the center of gravity are not, showing unstable data. Nevertheless, the latter does not influence on the size of cylinder such as width and circumference. Next, we analyzed point coordinates variations of scan data on a mannequin nude by life casting. The result was great deflection in case of complicated or horizontal sections including the reference point beyond proper distance from centers of four cameras. In case of the mannequin's size, accuracy proves comparatively high in that measurement errors in height, width, depth, and length dimension occurred all within allowable errors, only except chest depth, while there were a lot of measurement errors in a circumference dimension. Secondly, analysis of accuracy of automatic extraction identification program algorithm presented that a semi-automatic measurement program is better than an automatic measurement program. While both of them ate very acute in parts related to crotch, they are not in armpit related parts. Therefore, in extracting of human body size from 3D scan data, what really matters seems to parts related to armpits.

• 한국의류학회지
• /
• 제47권3호
• /
• pp.511-530
• /
• 2023

This study aims to analyze middle-aged men's frontal body shape asymmetry by measuring the left and right body dimensions and angles of 388 middle-aged men aged 40 to 59 using 3D body scan data and comparing the measured values. The study also compares the measured values of width, height, and angle and their relationships using Size Korea's anthropometric measurement and posture index of the New York Posture Rating Scale. The results confirm that the asymmetric shape characteristics of the upper and lower body appear differently. In addition, the asymmetrical characteristics between the upper and lower body differed, indicating that the close parts of the body affect each other. Similar to the difference in the left and right frontal body shapes and the average angle distribution, the asymmetrical upper and lower body characteristics also are found to be dissimilar when the correlations are examined. In contrast, there is no asymmetry in the width, height, and angle considering the age and BMI groups. Finally, the study classifies three body types and identifies their asymmetric characteristics. Overall, this study contributes primary data for further research on pattern production for asymmetric and unique body types and the development of customized apparel products.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.53-67
• /
• 2020

The purpose of this study is to analyze the foot shape and size specification of male high school students. 3D modeling programs such as 'Artec Studio', 'CATIA', and 'Auto CAD' measured the 3D scan data of 361 male high school students provided by KATS. Through principal factor analysis, 10 factors were extracted, including foot length, medial-lateral ratio, and foot length ratio. As the result of the cluster and ANOVA with post-hoc test (Duncan method), the differences among types were clarified. Type 1 (24.7%) represented outward medial-lateral ratio (M-L ratio) with the lowest instep, ankle and little deformed first toe. Type 2 (41.8%) was characterized by the shortest, even M-L ratio, thin ankle and heel, the highest instep and ankle. Type 3 (33.5%) showed the longest, inward M-L ratio, thick ankle and heel, and deformed first toe. As the cross-tabulation of foot length and ball circumference, 17.2 percent was not covered by KS standard; in addition, the foot length was longer than the KS standard. The correlation analysis of key dimensions showed that foot length and ball circumference were highly correlated with other items; therefore, regression equations were derived to estimate other foot measurements using these two items as independent variables.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.535-536
• /
• 2007

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.258-259
• /
• 2021

휴양림은 산림자원과 부대시설 그리고 이용객으로 구분되며, 웰빙 문화와 더불어 끊임없이 이용되고 있다. 이와 함께 이용객의 안전에 대한 관심이 필요하며, 본 연구에서는 산림에서 발생할 가능성이 있는 자연재해 상황에서 이용객이 빠른 시간(golden time)내에 대피하는 방법에 대해 연구하고자 한다. 이용객의 현재 위치를 탐색하고 최적을 대피로를 찾기 위해 휴양림 전체(산림자원, 부대시설 등)를 3D 스캔을 실시하고, 현 위치 인식으로 통해 대피 장소까지의 최적을 궤적을 찾아 이용객이 소지하고 있는 모바일 장치를 통해 빠른 대피 안내를 하는 것이 가능할 것으로 생각된다.