• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.340-347
• /
• 2015

HEVC (High Efficiency Video Coding) achieves high coding efficiency by employing a quadtree-based coding unit (CU) block partitioning structure and various prediction units (PUs), and the determination of the best CU partition structure and the best PU mode based on rate-distortion (R-D) cost. However, the computation complexity of encoding also dramatically increases. In this paper, to reduce such encoding computational complexity, we propose three fast PU mode decision methods based on encoding information of upper depth as follows. In the first method, the search of PU mode of the current CU is early terminated based on the sub-CBF (Coded Block Flag) of upper depth. In the second method, the search of intra prediction modes of PU in the current CU is skipped based on the sub-Intra R-D cost of upper depth. In the last method, the search of intra prediction modes of PU in the lower depth's CUs is skipped based on the sub-CBF of the current depth's CU. Experimental results show that the three proposed methods reduce the computational complexity of HM 14.0 to 31.4%, 2.5%, and 23.4% with BD-rate increase of 1.2%, 0.11%, and 0.9%, respectively. The three methods can be applied in a combined way to be applied to both of inter prediction and intra prediction, which results in the complexity reduction of 34.2% with 1.9% BD-rate increase.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2017

Geographic Information System The geographic information system (GIS) has been limited to the government and some public sectors. Recently, the market has been diversified by combining with other areas such as mobile and CRM (Customer Relationship Management). The development direction of GIS technology in the 21st century is Web GIS, 3D GIS, mobile GIS, LBS, etc. as general technology for GIS application system development and spatial information service. In this study, we developed a new concept marking nail (a marking nail with built - in intelligent storage memory device) from the function of simple positioning of a marking nail related to a previously used underground item,, Burial depth, pipe thickness, piping material, management agency, contractor, contact, etc.) and store it in DB server, if necessary.Make it available in the right place. Through this research, it is possible to prevent and minimize various accidents caused by irregular excavation works, etc., and to provide information for establishing countermeasures related to sink holes. In order to provide systematic and reliable information on underground burial management, it was proposed to input information conveniently in the field, and the purpose was to reduce the incidence of buried underground pipes absolutely.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.115-122
• /
• 2016

This paper proposes a system to detect driver's cognitive state by internal and external information of vehicle. The proposed system can measure driver's eye gaze. This is done by concept of information delivery and mutual information measure. For this study, we set up two web-cameras at vehicles to obtain visual information of the driver and front of the vehicle. We propose Gestalt principle based selective attention model to define information quantity of road scene. The saliency map based on gestalt principle is prominently represented by stimulus such as traffic signals. The proposed system assumes driver's cognitive resource allocation on the front scene by gaze analysis and head pose direction information. Then we use several feature algorithms for detecting driver's characteristics in real time. Modified census transform (MCT) based Adaboost is used to detect driver's face and its component whereas POSIT algorithms are used for eye detection and 3D head pose estimation. Experimental results show that the proposed system works well in real environment and confirm its usability.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.247-259
• /
• 2000

This paper introduces a new technique that reduces the search times and Improves the accuracy of motion estimation using high temporal and spatial correlation of motion vector. Instead of using the fixed first search Point of previously proposed search algorithms, the proposed method finds more accurate first search point as to compensating searching area using high temporal and spatial correlation of motion vector. Therefore, the main idea of proposed method is to find first search point to improve the performance of motion estimation and reduce the search times. The proposed method utilizes the direction of the same coordinate block of the previous frame compared with a block of the current frame to use temporal correlation and the direction of the adjacent blocks of the current frame to use spatial correlation. Based on these directions, we compute the first search point. We search the motion vector in the middle of computed first search point with two fixed search patterns. Using that idea, an efficient adaptive predicted direction search algorithm (APDSA) for block matching motion estimation is proposed. In the experimental results show that the PSNR values are improved up to the 3.6dB as depend on the Image sequences and advanced about 1.7dB on an average. The results of the comparison show that the performance of the proposed APDSA algorithm is better than those of other fast search algorithms whether the image sequence contains fast or slow motion, and is similar to the performance of the FS (Full Search) algorithm. Simulation results also show that the performance of the APDSA scheme gives better subjective picture quality than the other fast search algorithms and is closer to that of the FS algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.853-859
• /
• 2007

This paper presents a microstrip patch array antenna having transmission feed and reception feed for satellite communication in the Ku band. In this paper, the element of the patch array antenna is a three-stacked structure consisting of one radiation patch and two parasitic patches for high gain and wide bandwidth characteristics. To obtain higher gain, the unit elements are expanded into a $1{\times}8$ may using a mixture of series and parallel feeds. The proposed antenna has horizontal polarization for the Rx band and vertical polarization for the Tx band. To verify the practicality of this antenna, we fabricated a three-stacked patch array antenna and measured its performance. The gain of the array antenna in the Rx and Tx bands exceeds 17 and 18 dBi, respectively. The impedance bandwidth is over 10 % in both bands. The cross-polarization level is below -25 dB, and the sidelobe level is below -9.4 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.101-101
• /
• 2009

압전 세라믹스는 진동, 변형, 압력 등의 기계적 에너지를 전기적 에너지로 혹은 전기적 에너지를 기계적 에너지로 변환시키는 소자로서의 기능을 가지며 조성의 개선 및 제조 기술의 진보가 계속되어 큰 관심을 받고 있다. 최근 audio의 고급화 및 자동차, 평면 TV, 고성능 통신기기, 디지털방송, 홈시어터 등 스피커의 성능이 크게 부각되면서 대기업에서부터 중소기업에 이르기까지 고성능 스피커의 개발에 박차를 가하고 있다. 압전 세라믹을 이용하여 음압을 변조하는 압전 스피커는 디스크 형상의 압전 프레이트를 단층 또는 다층으로 형성하여 기존의 마그네틱 스피커와는 차별되는 형태를 가진 스피커로서 응용하는 것이다. PSN-PZT계 조성을 개발하여 $d_{33}$, 전기기계결합계수($k_p$), 온도안정성 및 내구성 향상 및 특성향상을 위한 입경 조절 및 공정을 연구하고자 한다. 디스크 형태의 압전 세라믹을 이용하여 2, 3, 4 layer 이상의 멀티레이어 시편을 제작하였고, 여러 시편에서 크기 및 형상, 접합 방법 등에 따른 특성을 최적화하여 스피커의 특성을 향상 시키고자 한다.

• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.57-67
• /
• 2017

In this paper, propose an algorithm to improve network lifetime by equally consuming energy of LEACH - Mobile sensor nodes. LEACH is one of energy efficient protocols. However, we did not consider the mobility of nodes. Therefore, the transmission reception success rate of the moving data is reduced. LEACH-Mobile is a protocol that has improved the drawbacks of these LEACH. However, since LEACH-Mobile has a larger number of data packets and consumes more energy than LEACH, it has a disadvantage that the lifetime of the network is short. In order to improvement these disadvantage, Based on the average of the remaining energy of the node, cluster heads are elected with a number of nodes whose energies are larger than the average of the remaining energy from the member nodes. After that, by trying to increase the lifetime of the network by equalizing the remaining energy. In to confirm whether improve the lifetime of the network, In this paper, the number of nodes and the position of all nodes are varied for each specific round, the rest energy is equalized, and the algorithm which uniformly selected the cluster head is compared with LEACH.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.70-81
• /
• 2020

Plastics that we use and simply throw away have a life span of about 500 years and barely decompose. The practice of producing and using common plastics needs to be challenged. Until now, they have been useful in the industrial structure of mass production, but it can be said that there is a lack of research into new materials to introduce and apply in terms of material recycling. As a result of this, we have come to the uncomfortable realization of the fact that we cannot incinerate or reuse these precious resources indiscriminately. No matter how well-designed a product is, it has a competitive advantage if production and consumption activities, waste, collection, sorting and treatment are considered in terms of a continuous cycle, and in this respect, Extended Producer Responsibility (EPR) can help. We are implementing the EPR system, and active industrialization in the field of recycling is required, which is also a challenge for producers to participate actively in recycling and seek to save and recycle resources in design and manufacturing. Against this backdrop, We would like to examine the possibilities, through various studies and developments on product design of recyclable materials, which is being conducted mainly in Europe. In particular, we would like to examine the methods, and value of solving environmental problems and the active efforts to achieve this in the design world, and in particular the case of product design using recycled plastics.

• International journal of advanced smart convergence
• /
• v.5 no.4
• /
• pp.21-25
• /
• 2016

Recent development in multi-channel surround is emerging in various formats to provide better stereoscopic and sound effects to consumers in recent broadcasting. The ability sound localize the sound sources in space is most considerable design factor on multi-channel surround system for human earing perception model. However, this paper propose the change of the sound localization according to the spacing of the speakers, which is not covered in the existing research focus on sound system design. Presently the sound system uses the position and number of the speakers to localize the sound. In the multi-channel surround environment, the proposed design uses the sound localization is caused by the directional characteristics of the speaker, the distance between the speakers and the distance between the listener and the speaker according to the directivity is required. The proposed design is simulated using virtual measurement with MATLAB simulation environment and performances are measured.

• Journal of Information Technology Services
• /
• v.8 no.3
• /
• pp.209-221
• /
• 2009

The successful mass media drama, 'The 1st Shop of Coffee Prince', has received lots of supports from the audience by showing them a vivid life and also enabling them to dream a real fantasy. One among the most powerful strategies that made this drama stay successful is the marketing value of the drama space fully maximized when doing the production. This study, introducing a unique representation of 2-D cell matrix with x-y plots of drama space set along the time stream following the scenario, first proposes a quantitative way of uncovering the hidden relation between drama space and scenario using nonlinear matrix filtering method and, secondly, suggests possible service designs mainly constrained by economical standpoints of the stakeholder in producing the drama. The methodology may invoke a plausible contradiction with art instincts that have hardly been supposed to be affected by financial debate, which, nevertheless, must sometimes be allowed under the circumstance of pursuing optimality in programming and producing the drama that must survive in the world of competitive market of service business.