• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.1-8
• /
• 1999

The magnetization and/or resistivity of high $T_c$ superconductors ($YBa_2Cu_3O_{7-\delta}$(YBCO) single crystal, $Bi_2Sr_2CaCu_2O_8$ (Bi-2212) single crystal, $Tl_2Ba_2CaCu_2O_8$ (Tl-2212) film, $HgBa_2Ca_2Cu_3O_8$ (Hg-1223) film) have been measured as a function of magnetic field H and temperature T. The extracted fluctuation part of the magnetization and conductivity exhibits a critical behavior consistent with the three-dimensional XY model. The dynamic critical exponent z does not sensitively vary with a type of the superconductors. The value of z ranges from 1.5 to $1.8{\pm}0.1$. However, the static critical exponent ${\nu}$ is the most largely increased in Tl-2212 that has a weaker interlayer coupling strength than YBCO; the value of ${\nu}$ is 0.669, 0.909, 1.19, and 1.338 for YBCO, Bi-2212, Hg-1223, and Tl-2212 respectively. The results indicate that the weak interlayer coupling along the c-axis of high $T_c$ superconductors near $T_c$ does not influence the dynamic critical exponent z (the same value of superfluid $^4He$), but significantly increases the static critical exponent ${\nu}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.44-47
• /
• 1995

In this study, dielectric and piezoelectric properties of 0.4[0.1Bi(Ni$\_$1/2/Ti$\_$1/2/)O$_3$0.9Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$]-0.6(PbZr$\_$y/Ti$\_$1-y/)O$_3$ceramics with Zr/Ti ratio were observed. As a results, structure of the ceramics with ZrO$_2$(y) 0.425 and 0.45 was MPB. Electromechanical coupling coefficients k$\_$p/, k$\_$31/ of the BN$\_$162/ specimen were 57.2%, 35.6% and piezoelectric constants d$\_$33/, d$\_$31/ were 720, 298[x10$\_$-12/C/N).

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.290-298
• /
• 2018

In order to investigate the effect of thickness on the dielectric and piezoelectric properties of (001) PMN-29PT single crystals, three different types of PMN-29PT samples were prepared using the solid-state single crystal growth (SSCG) method: high density crystal [99%], low density crystal [95%], and high density crystal doped with Mn [98.5%]. When their thickness decreased from 0.5 mm to 0.05 mm, their dielectric constant ($K_3{^T}$), piezoelectric constants ($d_{33}$ and $g_{33}$), and electromechanical coupling factor ($k_t$) decreased continuously. However, their dielectric loss (tan ${\delta}$) increased. The addition of Mn to PMN-PT induced an internal bias electric field ($E_I$), increased the coercive electric field ($E_C$), and prevented local depoling. Therefore, Mn-doped PMN-PT crystals show high stability as well as high performance, even in the form of very thin plates (< 0.2 mm), and thus are suitable for application to high frequency composites, medical ultrasound probes, non-destructive testing devices (NDT), and flexible devices.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1292-1296
• /
• 2002

본 논문에서는 CFB 구조에 기반한 마이크로스트립 라인을 이용하여 커플링 개수가 3개인 가변 대역통과 필터를 제안한다. 바이어스 전압을 증가시키면 강유전체의 실효 유전율($\varepsilon$eff)이 감소하고, 감소된 실효 유전율은 중심 주파수를 높은 값으로 이동시킨다 설계된 필터는 $\varepsilon$eff이 13～10에 걸쳐, 반사 손실이 10 dB 이상, 삽입손실이 3.5 dB 이하, 3-dB 대역폭이 1.18 GHz 이하, 중심 주파수는 25.4 GHz에서 28.8 GHz까지 이동하므로 가변성은 3.4 GHz에 달하는 특성을 보인다. 필터의 크기는 7.0 mm ${\times}$ 5.0 mm ${\times}$ 0.5 mm이다.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.240-244
• /
• 2013

In this paper, we present an improvement of a closed-form formula for mutual impedance computation. Depending on the center-to-center spacing between two rectangular microstrip patch antennas, the mutual impedance formula is separated into two parts. The formula based on synthetic asymptote and variable separation is utilized for spacings of more than 0.5 ${\lambda}_0$. When the spacing is less than 0.5 ${\lambda}_0$, an approximate formula is proposed to improve the computation for closely spaced elements. Simulation results are compared to computational results of mutual impedances and mutual coupling coefficients as functions of normalized center-to-center spacing in both E- and H-plane coupling configurations. A good agreement between simulation and computation is achieved.

• 한국광학회지
• /
• 제15권6호
• /
• pp.495-502
• /
• 2004

파장가변 필터를 목적으로 plane-concave 거울쌍으로 구성된 Fabry-Perot 공진기에 대한 해석모델을 제안하고, 이를 실제 제작과정에서의 변수 값을 적용하여 해석한 결과를 제시하였다. 공진기의 결합손실과 거울의 손실이 필터의 삽입손실에 가장 큰 변수로 작용하며, plane-concave 거울쌍 구성을 이용하여 finesse가 600, FSR이 57 nm, 삽입손실 (insertion loss)이 3 dB 이하인 필터를 구현하기 위해서는 손실이 0.09% 이하인 거울을 사용하여 공진기의 결합손실이 0.1% 이하가 되도록 오목거울의 곡률반경과 정렬상태를 조절하여야 하는 것으로 밝혀졌다.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.225-230
• /
• 2019

In order to improve performance for the size of the rat-race ring coupler, the CCL is used for the realization as the delay line. As realizing lower coupling coefficient, the ratio of the size-reduction for the CCL is enhanced. The CCL is alternated with ${\lambda}_g/4$ of the rat-race ring, and optimized two CCLs are inserted for the size-reduction. the coupling coefficient is 0.2, and electrical lengths of each CCL are $28.2^{\circ}$ and $21.7^{\circ}$. Designed rat-race ring using the CCL has the size of $18.76{\times}20.45mm^2$ and the size-reduction ratio of fabricated rat-race ring using the CCL has 76.8%. Also, fabricated rat-race ring is measured the insertion loss of 3.20dB at the center frequency of 2.45GHz and the 20dB bandwidth is 24.04%. Differenced magnitude and phase between threw port and coupled port are measured 0.1dB and $177.4^{\circ}$, respectively. These performances are almost same compared with the conventional rat-race ring. Suggested application of the CCL can be used various devices and circuits for the size-reduction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.31-35
• /
• 2002

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, composite materials were put to dry interfacial treatment by use of plasma technology. It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.65-72
• /
• 2017

We propose a nearly lossless, compact, electrically modulated vertical directional coupler, which is based on the controllable evanescent coupling in a previously proposed graphene-assisted total internal reflection (GA-FTIR) scheme. In the proposed device, two single-mode waveguides are separate by graphene-$SiO_2$-graphene layers. By changing the chemical potential of the graphene layers with a gate voltage, the coupling strength between the waveguides, and hence the coupling length of the directional coupler, is controlled. Therefore, for a properly chosen, fixed device length, when an input wave is launched into one of the waveguides, the ratio of their output powers can be controlled electrically. The operation of the proposed device is analyzed, with the dispersion relations calculated using a model of a one-dimensional slab waveguide. The supermodes in the coupled waveguide are calculated using the finite-element method to estimate the coupling length, realistic devices are designed, and their performance was confirmed using the finite-difference time-domain method. The designed $3{\mu}m$ by $1{\mu}m$ device achieves an insertion loss of less than 0.11 dB, and a 24-dB extinction ratio between bar and cross states. The proposed low-loss device could enable integrated modulation of a strong optical signal, without thermal buildup.

• 한국전자파학회논문지
• /
• 제21권5호
• /
• pp.486-493
• /
• 2010

본 논문에서는 급격한 감쇄율 특성을 갖는 독창적인 초광대역(UWB: Ultra Wideband) 스트립라인 대역 통과 여파기(BPF)를 소개한다. 초광대역의 특성은 기본적으로 "+"자 공진기와 주 전송 선로간의 용량성 결합으로부터 얻어진다. "+" 자 공진기는 ${\lambda}/2$의 전송 선로의 중심에 두 개의 스터브를 병렬 연결된 구조를 가진다. 하나는 ${\lambda}/8$ 단락 회로 스터브로 ${\lambda}/2$ 전송 선로의 상측에 연결되고, 다른 하나는 ${\lambda}/8$ 개방 회로 스터브로 ${\lambda}/2$ 전송 선로의 하측에 연결된다. 이 두 개의 스터브들은 통과 대역의 하단과 상단의 차단주파수에서 두 개의 감쇄극을 제공한다. "+" 자 공진기 상측에 위치하여 용량성 결합을 이루는 주 전송 선로는 입력과 출력 선로에 또 한 번의 ${\lambda}/4$ 길이의 용량성 결합을 하여 통과 대역 하부과 상부의 저지 대역에서 원하지 않는 신호를 억압하기 위해 구성하였다. 본 여파기는 미국에서 허가한 초광대역(3.1~10.6 GHz)의 대역에서 선택도가 우수한 대역 통과 특성을 얻기 위해 2.4 GHz와 11.1 GHz에서 81 dB/GHz와 86 dB/GHz의 기울기를 제공하는 두 개의 전송 영점(감쇄극)을 갖도록 설계되었다. 본 여파기는 유전상수 7.8을 갖는 저온 동시 소성 세라믹(LTCC) 그린테이프로 제작되었다. 측정 결과는 HFSS 해석 결과와 거의 일치하였다. 통과 대역에서 0.7 dB 이하의 삽입 손실과 14 dB 이상의 반사 손실이 측정되었다. 중심 주파수 군 위상 지연은 0.27 ns이고, 통과 대역에서 군 위상 지연의 변화량은 0.5 ns 이하이다. 본 여파기의 크기는 $6{\times}18{\times}0.6\;mm^3$이다.