• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.180-183
• /
• 2001

본 논문에서는 N개의 평행 결합선로를 이용한 3dB 결합기를 해석하였으며, 유도된 식에 의하여 최소의 단수와 크기로 3dB 결합기를 설계하였다. 기존의 Spectral Domain상에서 N단 평행 결합선로의 복잡한 관계식 유도를 S 파라미터 관계식으로 간단히 유도 하였으며, 유도된 식의 타당성을 위해 실제 제작 검증하였다. 제작된 결합기는 Loose coupling의 평행 결합 선로의 광대역 특성을 그대로 이용하기 때문에 Lange Coupler와 같은 높은 임피던스와 Tight coupling을 구현 할 필요가 없으며, wire bonding도 용이하게 된다. 최소의 단수로 구현하기 위해 RT/Duroid의 R06006과 같은 높은 유전율과 두꺼운 기판을 사용하여 2단으로 3dB 구현이 가능하게 하였다. 제작결과 3.6GHz에서5.5GHz로 대략 42%(0.5dB imbalance) 정도의 광대역특성을 가지고 위상오차도 1$^{\circ}$내외의 결합기를 구현할 수 있었고 격리도 특성 또한 대역 내에서 15dB 내외의 특성을 보였다.

• Fisheries and Aquatic Sciences
• /
• v.9 no.4
• /
• pp.175-178
• /
• 2006

An acidic ent-cyclic peroxide was isolated from a sponge, Plakotis sp., and showed activity against leishmaniasis and pathogenic fungi. To improve the activity of this compound, we coupled the acidic ent-cyclic at the C1 position of ircinol A. Compound 3 exhibited significant activity against Leishmania mexican a and fungi with $IC_{50}$ values of 0.7 and $0.3-34{\mu}g/mL$, respectively. The yield of compound 3 was 98%.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.119-122
• /
• 2000

We proposed a novel mode shape converter (MSC) that can effectively reduce the coupling loss between polymer rib waveguide and single mode fiber. The double-nb geometry that was used in the novel MSC converted an elliptical mode to circular mode and an circular mode to elliptical mode. This structure can be easily realized by using the typical fabrication process for polymer wavegUide. Simulation using a three dimensional beam propagation method showed that the novel MSC has a coupling loss of 0.079 dB/facet and total lllsertioll loss of less than 0.2 dB. .2 dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.257-259
• /
• 2019

We have investigated the electrical coupling in a 3D monolithic NOR gate structure using TCAD simulation. The electrical coupling of 3D monolithic NOR gate can be caused by the transistor located in the upper/lower or diagonal transistors. The drain current of the upper layer NMOSFET is the same when the voltage of PgateB is 0 V and 1 V. It has been confirmed that the electrical coupling in the diagonal direction does not affect the device characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.332-333
• /
• 2005

In this study, in order to develop low temperature sintering piezoelectric actuator, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.50},Ti_{0.50})_{1-x-0.03}$ (PMW-PNN-PZT) ceramic systems were fabricated using $CaCO_3-Li_2CO_3$ sintering aid and their dielectric and piezoelectric properties were investigated with the variation of PNN substitution. The piezoelectric actuator requires high piezoelectric constant $d_{33}$ and high electromechanical coupling factor kp. At the PMW-PNN-PZT ceramics with 9mol% PNN substitution sintered at $900^{\circ}C$, the density, electromechanical coupling factor kp, dielectric constant, piezoelectric constant $d_{33}$ and mechanical quality factor Qm showed the excellent values of 7.86 [$g/cm^3$], 0.584, 1881, 485 [pC/N] and 76, respectively for piezoelectric actuator application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.930-935
• /
• 2009

This paper describes a miniaturezed metamaterial BT chip antenna for mobile devices. The size of the proposed antenna is $3.0\;mm(W){\times}2.0\;mm(L){\times}1.2\;mm(H)$. And it is fabricated by chip type. The zeroth-order resonant properties are analyzed by magnitude and phase distributions of the surface current using surface current scanning system. The antenna offers omni-directional radiation patterns and measured 3D average gain is over - 1.7 dBi.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.16-22
• /
• 2016

This study is a structural analysis of 3" Cryogenic Safety Breakaway Coupling using a manufactured product from KLAW Company. Breakaway coupling is very important in the pipe system, especially when transporting fuel or gas in the pipeline. For the analysis of the patent infringement target, Dover and KLAW Company's technologies (US 08127785, EP 0764809) were analyzed. Finally, the flip-flap valve overlap was measured after combining the breakaway coupling through 3D modeling, and the valve overlap had a 0.7mm measurement value from the height gauge. The safety breakaway coupling consisted of a total of 62 pieces (body: 42, valve module: 21).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.651-657
• /
• 2003

We have demonstrated an in-line polarization splitter based on a side-polished fiber coupler including a thin metal intermediate layer. The experimental results revealed that the metal layer with proper thickness prevents TE polarization component from optical coupling between two contacted side-polished fibers, whereas it allows TM polarization component to the coupling. The design and fabrication techniques about the polarization splitter exploiting the side-polished fibers have been presented. The fabricated polarization splitter exhibited 18dB and 23dB of isolation ratio for TE polarization and TM polarization, respectively. The measured insertion loss for TE and TM polarization was 0.7dB and 1.3dB, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.118-120
• /
• 2016

A coplanar waveguide employing periodic 3D coupling structures (CWP3DCS) was developed for application in miniaturized on-chip passive components on silicon radio frequency integrated circuits (RFIC). The CWP3DCS showed the shortest wavelength of all silicon-based transmission line structures that have been reported to date. Using CWP3DCS, a highly miniaturized impedance transformer was fabricated on silicon substrate, and the resulting device showed good RF performance in a broad band from 4.6 GHz to 28.6 GHz. The device as was 0.04 mm² in size, which is only 0.74% of the size of the conventional transformer on silicon substrate.