• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.707-710
• /
• 1990

To extend the shelf-life of kimchi, effective temperature in preparing room and salts concentration of product were monitored. The temperature in preparing room was excellent at $15^{\circ}C$ than $25^{\circ}C$ and effective salt concentration was 3.0% for storage. Under the these conditions, preservation temperature was desirable at $-1{\pm}1^{\circ}C$ and can be stored over 120 days. When the storaging temperature was $-5^{\circ}C$, it showed to freeze the tissue and juice of kimchi. The advisable packing time for storage was just after mixing.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.543-548
• /
• 1988

The metal-support interaction was studied in 1∼5wt% copper supported on $\gamma-alumina$ and titania systems by temperature programmed reduction (TPR) and EPR. When the samples were treated with oxygen at $500^{\circ}C$, the relative area of H2-TPR peak at higher temperature increased with copper content for titania system whereas that of lower temperature increased for ${\gamma}$-alumina system. After oxygen treatment at $500^{\circ}C,\;{\gamma}$-alumina system showed a TPR peak at $300^{\circ}C$ while two peaks at 120 and $180^{\circ}C$ were found in titania system. A typical $Cu^{2+}$ EPR signal was observed on ${\gamma}$-alumina but very broad and small one on titania. From the results, it was suggested that the metal-support interaction increases in the order of silica < titania < ${\gamma}$-alumina and copper oxide has different loading characteristics depending on the supports.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.217-225
• /
• 2009

The study was conducted to evaluate the effect of drying, curing and freezing on the quality of beef. Three types of dried (without salt = $T_1$, with salt = $T_2$ and salt + spices = $T_3$); three types of cured (salt curing = $T_4$, sugar curing = $T_5$ and brine curing = $T_6$) and three types of frozen beef ($0^{\circ}C=T_7^{\circ}C$, $-10^{\circ}C=T_8$ and $-20^{\circ}C=T_9$) were analyzed at different time intervals up to the period of 180 d. Parameters studied were protein, fat, ash, color and cooking loss of beef. All the chemical constituents (protein, fat and ash) were decreased gradually up to 120 d. The decreasing trend was observed rapid after 120 d up to 180 d of preservation. Highest protein loss was found in $T_7$ (11.1 %) and the lowest protein loss was found in $T_6$ (3.85%) in 180 d preservation and significant (p < 0.01) differences were observed among the different preservation methods. Highest fat loss was observed in $T_6$ (7.62%) and the lowest fat loss was observed in $T_2$ (3.18%) and the differences were also significant (p < 0.05) among different methods during the experimental period. Spices dried beef showed a brighter color than others and cured beef showed brown color and the intensity of color was reduced gradually with the increasing of storage period. $T_9$ showed the lowest cooking loss among 3 treatments of frozen beef and the differences also significant (p < 0.01) up to 180 d. It might be stated that sugar curing ($T_5$) and spices drying ($T_3$) would be the useful technique of meat preservation in rural areas and freezing ($T_9$) would be used in large scale preservation at urban areas.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.99-104
• /
• 2014

In this paper, Fire resistance test was carried out in accordance with the change of the insulation conditions on the exposed side and unexposed side of the coaming to obtain optimal insulation conditions for class H-120 insulation in connection with specimen-1 of the preceding paper for the evaluation of fireproof performance for fire dampers according to hydrocarbon fire conditions. As a test result, specimen-2(88 mm, $171^{\circ}C$) was satisfied class H-120 insulation, but specimen-3(76 mm, $181^{\circ}C$) was exceeded thermal insulation acceptance criteria at 110 minutes, therefor, specimen-2(88 mm) is optimal insulation conditions as possible lightweight than specimen-1. Test result comparison, we concluded that temperature rising of the coaming insulation surface was influenced by conductive heat from the bulkhead, and coaming surface was influenced by radiant heat from blade & coaming.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.264-267
• /
• 2004

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the $LaNiO_3$ (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thinfilms were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization Pr and coercive field were $23.5\;C/cm^2$ and 120 kV/cm, respectively.

• Resources Recycling
• /
• v.10 no.6
• /
• pp.29-34
• /
• 2001

Fly ash powders were refined and separated into fine and coarse size by multi-air classification, and each particle was used for synthesizing mullite and zeolite. Mullite was prepared by sintering the mixture of fine fly ash with mean size of 6.5 $\mu$m and $A1_2$$O_3$powder at above $1450^{\circ}C$. Zeolite was synthesized through hydrothermal reaction with coarse fly ash mean size of $56.3\mu$m in 3.5 M NaOH solution at $120^{\circ}C$. The whole range of particle size can be recycled through size classification into fine and coarse fractions, which are used for syntheses of inorganic materials.

• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.109-116
• /
• 2002

We designed the flyback planar transformer, which had 8 W capacity, with 70 V input voltage and 8.2 V output voltage for the establishment of design method and the confirmation of application possibility. The numerical value of inductance measured under the switching frequency of 120 kHz was 1650 $\mu$H, which was the inductance efficiency of'85∼87% against theoretical value. The A.C. resistance of primary and secondary coil was 4.2 Ω and 0.25 Ω respectively, On the other hand, the quality factor for each wound numbers showed quite a high value of 158 and 75 respectively. And the Coupling Factor was 0.96∼0.97 under 120 kHz switching frequency. The inductance rapidly increased as the thickness of the core plane increased until it became 1.4 mm but under the thickness more than 1.4 mm, there was no substantial change. Therefore, the critical value of the plane thickness of core was 1.4 mm. And the shape of the output wave of the planar transformer at 70V input voltage was a stable square wave.

• Childhood Kidney Diseases
• /
• v.1 no.1
• /
• pp.38-45
• /
• 1997

Purpose : Vesicoureteral reflux(VUR) in childhood may be the primary cause of recurrent urinary tract infection and renal scarring. Renal ultrasonography, DMSA, and voiding cystourethrogram are the standard clinical methods for detection of vesicoureteral reflux. But these methods have many disadvantages such as invasiveness and high cost. So, we studied to observe the significance of urine ${\beta}_2$-microglobulin in association with other non-radiologic methods for predictng vesicoureteral reflux. Methods : We evaluated 40 patients with urinary tract infection who were admitted to Korea university Hospital from July 1993 to June 1994. Among them, 24 patients revealed urinary tract infection and vesicoureteral reflux(group A), 16 patients revealed only urinary tract infection(group B). Both groups were compared by presence of fever, hematuria, and proteinuria, positivity of CRP, and level of BUN, Cr, GFR by 99mTc-DTPA, urine ${\beta}_2$-microglobulin, 24 hours urine albumin. Results : 1) Among 24 patients who had vesicoureteral reflux, 14 had unilateral VUR, 10 had bilateral VUR, three kidneys with grade I, nine with grade II, eleven with grade III, eleven with grade IV by classification of International Reflux Study Committee. Among them, 14 patients had renal scar, five with type A, five with type B, four with type C, none with type D by Smellie's classification. 2) The mean of GFR, BUN, Cr, 24hrs urine albumin and the presence of hematuria and proteinuria showed no significant difference between group A and group B. The mean of urine ${\beta}_2$ microglobulin in group A and group B were $283.6{\pm}195.8{\mu}g/l$ and $78.7{\pm}48.5{\mu}g/l$ respectively, showing that group A had a higher value than group B (p<0.01). In case of ${\beta}_2$ microglobulin > $120{\mu}g/l$ and CRP(+), the sensitivity was 93.3% and the specificity is 77.8% for detecting of VUR. In case of ${\beta}_2$-microglobulin>$120{\mu}g/l$ and fever(+), the sensitivity was 92.2%, and the specificity was 62.5% for detecting of VUR Conclusions : If the level of urinary ${\beta}_2$-microglobulin is more than 120ug/l in children with urinary tract infection in association with fever(+) or CRP(+), it can predict VUR. So we can use it for early detection of VUR.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.1-6
• /
• 1993

Dielectric and piezoelectric porperties of pseudoternary xPb(Al2/3W1/3)O3-(1-x)Pb(Zr0.52Ti0.48)O3 (x=1~10mol%) ceramic system have been investigated as a function of the amount of PAW[Pb(Al2/3W1/3)O3] and sintered from 110$0^{\circ}C$ to 120$0^{\circ}C$ for 1hr. As the amount of PAW increases, the c/a of tetragonal structure decreases. The grain size was reduced with increasing the amount of PAW addition. However, the density, dielectric constant and electromechanical coupling factor(kp) exhibited a maximum value at the amount of 5mol% PAW addition.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.117-123
• /
• 2003

For screening of autoregulator receptor gene from Saccharopolyspora erythraea, PCR was performed with primers of receptor gene designed on the basis of amino acid sequences of autoregulator receptor proteins with known function. PCR products were subcloned into the BamHI site of pUC19 and transformed into the E. coli DH5$\alpha$. The isolated plasmid from transformant contained the fragment of 120 bp, which was detected on 2% gel after BamHI treatment. The insert, 120 bp PCR product, was confirmed as the expected internal segment of gene encoding autoregulator receptor protein by sequencing. Southern and colony hybridization using Saccha. erythraea chromosomal DNA were performed with the insert as probe. The plasmid (pEsg) having 3.2 kbp SacI DNA fragment from Saccha. erythraea is obtained. The 3.2 kbp SacI DNA fragment was sequenced by the dye terminator sequencing. The nucleotide sequence data was analyzed with GENETYX-WIN (ver 3.2) computer program and DNA database. frame analyses of the nucleotide sequence revealed a gene encoding autoregulator receptor protein which is a region including KpnI and SalI sites on 3.2 kbp SacI DNA fragment. The autoregulator receptor protein consisting of 205 amino acid was named EsgR by author. In comparison with known autoregulator receptor proteins, homology of EsgR showed above 30%.