• Fisheries and Aquatic Sciences
• /
• v.19 no.2
• /
• pp.8.1-8.11
• /
• 2016

To quantitatively estimate the influence of cuttlebone on the target strength (TS) of golden cuttlefish, the cuttlebone was carefully extracted from 19 live cuttlefish caught using traps in the inshore waters around Geojedo, Korea, in early May 2010 and the TS was measured using split-beam echosounders (Simrad ES60 and EY500). The TS-length relationships for the cuttlefish (before the extraction of cuttlebone, Fish Aquat Sci. 17:361-7, 2014) and the corresponding cuttlebone were compared. The cuttlebone length ($L_b$) ranged from 151 to 195 mm (mean $L_b$ = 168.3 mm) and the mass ($W_b$) ranged from 29.3 to 53.2 g (mean $W_b$ = 38.8 g). The mean TS values at 70 and 120 kHz were -33.60 dB (std = 1.12 dB) and -32.24 dB (std = 1.87 dB), respectively. The mean TS values of cuttlebone were 0.19 dB and 0.04 dB lower than those of cuttlefish at 70 and 120 kHz, respectively. For 70 and 120 kHz combined, the mean TS value of cuttlebone was -32.87 dB, 0.11 dB lower than that of cuttlefish (-32.76 dB). On the other hand, the mean TS value of cuttlebone predicted by the regression ($TS_b$ = 24.86 $log_{10}$ $L_b$ - 4.86 $log_{10}$ ${\lambda}$ - 22.58, $r^2$ = 0.85, N = 38, P < 0.01) was -33.10 dB, 0.04 dB lower than that of cuttlefish predicted by the regression ($TS_c$ = 24.62 $log_{10}$ $L_c$ - 4.62 $log_{10}$ ${\lambda}$ - 22.64, $r^2$ = 0.85, N = 38, P < 0.01). That is, the contribution of cuttlebone to the cuttlefish TS determined by the measured results was slightly greater than that by the predicted results. These results suggest that cuttlebone is responsible for the TS of cuttlefish, and the contribution is estimated to be at least 99 % of the total echo strength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.163-163
• /
• 2010

중적외선 영역 ($3{\sim}5\;{\mu}m$)은 공기 중에 존재하는 이산화탄소나 수증기에 의해 흡수가 일어나지 않기 때문에 군사적으로 중요한 파장 영역이며, 야간에 적을 탐지하는데 응용되고 있다. InSb는 77 K에서 중적외선 파장 흡수에 적합한 밴드갭 에너지 (0.228 eV)를 갖고 있으며, 다른 화합물 반도체와 달리 전하 수송자 이동도 (전자: $10^6\;cm^2/Vs$, 정공: $10^4\;cm^2/Vs$)가 매우 빠르기 때문에 적외선 화상 감지기 재료로 매우 적합하다. 또한 현재 중적외선 영역대에서 널리 사용되는 HgCdTe (MCT)와 대등한 소자 성능을 나타냄과 동시에 낮은 기판 가격, 소자의 제작 용이성 때문에 MCT를 대체할 물질로 주목 받고 있다. 하지만, 기판과 절연막의 계면에 존재하는 결함 때문에 에너지 밴드갭 내에 에너지 준위를 형성하여 높은 누설 전류 특성을 보인다. 따라서 InSb 적외선 소자의 구현을 위하여 고품질의 절연막의 연구가 필수적이라고 할 수 있겠다. 절연막의 특성을 알아보기 위해, n형 InSb 기판에 플라즈마 화학 기상 증착법 (PECVD)을 이용하여 $SiO_2$, $Si_3N_4$를 증착하였으며, 증착 온도를 $120^{\circ}C$에서 $240^{\circ}C$까지 $40^{\circ}C$ 간격으로 변화하여 증착온도가 미치는 영향에 대하여 알아보았다. 절연막과 기판의 계면 특성을 분석하기 위하여 77 K에서 커패시턴스-전압 (C-V) 분석을 하였으며, 계면 트랩 밀도는 Terman method를 이용하여 계산하였다 [1]. $Si_3N_4$를 증착하였을 경우, $120{\sim}240^{\circ}C$의 증착 온도에서 $2.4{\sim}4.9{\times}10^{12}\;cm^{-2}eV^{-1}$의 계면 트랩 밀도를 가졌으며, 증착 온도가 증가할수록 계면 트랩 밀도가 증가하는 경향을 보였다. 또한 모든 증착 온도에서 flat band voltage가 음의 전압으로 이동하였다. $SiO_2$의 경우 $120{\sim}200^{\circ}C$의 증착온도에서 $7.1{\sim}7.3{\times}10^{11}\;cm^{-2}eV^{-1}$의 계면 트랩 밀도 값을 보였으나, $240^{\circ}C$ 이상에서 계면 트랩밀도가 $12{\times}10^{11}\;cm^{-2}eV^{-1}$로 크게 증가하였다. $SiO_2$ 절연막을 사용함으로써, $Si_3N_4$ 대비 약 25% 정도 낮은 계면 트랩 밀도를 얻을 수 있었으며, 모든 증착 온도에서 양의 전압으로 flat band voltage가 이동하였다. 두 절연막에 대한 계면 트랩의 원인을 분석하기 위하여 XPS 측정을 진행하였으며, 깊이에 따른 조성 분석을 하였다. 본 실험에서 최적화된 $SiO_2$ 절연막을 이용하여 InSb 소자의 pn 접합 연구를 진행하였다. Be+ 이온 주입을 진행하고, 급속열처리(RTA) 공정을 통하여 p층을 형성하였다. -0.1 V에서 16 nA의 누설 전류 값을 보였으며, $2.6{\times}10^3\;{\Omega}\;cm^2$의 RoA (zero bias resistance area)를 얻을 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.516-519
• /
• 1999

스위칭 전원에 사용되는 Mn-Zn 페라이트에 대항하는 고성능화의 요구에 부응하기 위해 그 중요한 요인이 되는 기수가 다른 Mn 산화물에 착목하여 그것들을 이용 제작한 Mn-Zn 페라이트의 자기특성 및 결정구조를 정밀하게 조사함과 동시에 그것들의 상관성을 검토하였다. Mn-Zn 페라이트의 소성 분위기의 변경방식은 소성개시에서 종료시까지 질소 분위기, 냉각시부터 질소분위기로 변경, 소성 개시에서 종료시까지 대기중 소성 세가지를 실험하였고, 소성 온도는 115$0^{\circ}C$, 120$0^{\circ}C$, 125$0^{\circ}C$ 130$0^{\circ}C$ 135$0^{\circ}C$ 및 140$0^{\circ}C$의 6종류의 시료를 제작하였다. 이 결과는 Mn-Zn 페라이트의 소성 분위기 및 온도 최적화는 승온 및 온도 유지 단계에서는 대기중으로, 냉각단계에서는 질소가스 분위기로 치환한 것과 소성 온도는 120$0^{\circ}C$ 이다. 이 분위기에서 Mn-Zn 페라이트를 가수를 다르게 하여 시료의 투자율 및 주파수 특성, 코아로스 주파수 의존성, 코아로스 주파수로 나눈값의 주파수 의존성, 스피넬 구조(311)의 면에서의 회절픽, 자화의 온도 의존성을 분석하였다. 이 결과는 Mn$_3$O$_4$를 출발원료로 사용한 Mn-Zn 페라이트가 투자율 및 한계 주파수 모두 뛰어난 특성을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.356-359
• /
• 1997

The Effects of different melting temperature and holding time in the melting temperature on J$\sub$c/ of YBa$_2$Cu$_3$O$\sub$x/ based superconducting bulk using MPMG process were investigated. the value of critical current density was the largest at l120$^{\circ}C$, the melting temperature which is appointed to the mid point of (Y$_2$BaCuO$\sub$5/ + Liquid)region. With the melting temperature in which the value of J$\sub$c/ is the largest, J$\sub$c/ was again measured to see whether the holding time at this proper melting temperature has the effect on the critical characteristics. From the result above it was concluded that the melting temperature and holding time were important to improve the J$\sub$c/ and the formation of the Y$_2$BaCuO$\sub$5/. In this paper, the melting temperature obtained was l120$^{\circ}C$ and propel holding time could be obtained as 20 minute and the more holding time was not effective in the J$\sub$c/ improvement as well as the formation of Y$_2$BaCuO$\sub$5/.

• Korean Journal of Ichthyology
• /
• v.29 no.3
• /
• pp.197-204
• /
• 2017

Life history of the Siberian stone loach, Orthrias toni, were investigated using samples collected from Buk Stream, Goseong-gun, Gangwon-do, Korea. Growth was rapid between April and October when water temperature exceeded $10^{\circ}C$, but growth almost stopped from November-March when water temperature was below $10^{\circ}C$. Age groups for O. toni estimated by frequency distribution of total length in spawning season (May) indicated the 60~81 mm is 1-year old, the 82~99 mm group is 2-years old, the 100~119 mm is 3-years old, and the 120~140 mm is more than 4-years old. Total length range by sex was similar, and sex ratio (♂/♀) was 0.73. Spawning season according to the gonadosomatic index (GSI) was May with water temperature $14{\sim}17^{\circ}C$, and almost all fish were mature after one year old. Fecundity increased rapidly with age with an average of $4,460{\pm}3,302$ ($mean{\pm}SD$). Size of mature eggs was $0.87{\pm}0.03mm$ in diameter irrespective of age.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.120.3-120
• /
• 1998

• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.05a
• /
• pp.120-120
• /
• 2012

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.103-108
• /
• 2018

In interrupted cutting, the workpiece has a groove that impacts both the cutting tool and the workpiece. Therefore, cutting tool damage occurs rapidly. In this study, I performed interrupted cutting of carbon steel for machine structures (SM20C) using an uncoated carbide tool (SNMG120404, P20), and observed tool damage, cutting chip shape, and the workpiece surface. Results: Under the specific cutting conditions of feed rate = 0.066 mm/rev, cutting speed = 120 m/min, and depth of cut = 0.1 mm; and feed rate = 0.105 mm/rev, cutting speed = 120 m/min, and depth of cut = 0.2 mm, the observed tool damage was small. Similar chip shape was observed (Expt. No. 1, 3, 7). Workpiece damage was observed (Expt. No. 3, 5, 7, 9).

• Korean Journal of Crystallography
• /
• v.12 no.2
• /
• pp.97-101
• /
• 2001

Phillipsite-type zeolite powders were synthesized from domestic coal fly ash by hydrothermal reaction with 2.0 M-3.5M NaOH solution at $80^{\circ}C{\sim}120^{\circ}C$ for 24 h. The properties of zeolite were investigated by XRD, SEM and IR spectroscopy. The effects of chemical composition of fly ash, reaction temperature and NaOH concentration on the zeolite synthesis were well appeared on IR spectra. It is found that the $TO_4$(T=Si, Al) tetrahedra have a well ordered structure as the $SiO_2$ content, synthesis temperature and NaOH concentration become high.

• Journal of Industrial Technology
• /
• v.3
• /
• pp.87-94
• /
• 1983

Heating characteristics of red pepper paste packed in report pouches of various thicknesses and their storage stability were investigated to determine the adequate processing conditions that good bacteriological safty and minimal quality changes could be obtained, when sterilized by using a steam-air system retort. A heat penetration into pouch-packed red pepper paste was carried out through by a conductive heat transfer, indicating a simple logarithmic heating curve, and the smaller thickness revealed the higher heat penetration rate, suggesting the possibility of high temperature-short time sterilization of red pepper paste. The processing conditions with Fo-value of 4.5 or higher were sufficient for keeping up bacterial safty, but based on C-value, better quality retention was obtained at pouch thickness of 15mm under the processing temperature of $120^{\circ}C$. Subsequent storage study revealed that the red pepper paste packed in 15mm and processed at $120^{\circ}C$ with Fo=4.5 could be held without any spoilage and overall acceptance change, when stored for 6 months at room temperature under the relative humidity of 70%. After 3 months storage in $38^{\circ}C$ under saturation humidity, overall acceptance of red pepper paste were judged not to be maintainable on the acceptable level, but it may be suggested that above the results could be kept up a desirable quality without any remarkable deterioration.