• Archives of Pharmacal Research
• /
• v.18 no.3
• /
• pp.179-182
• /
• 1995

Previous study showed that $CCl_4$ administration evoked a rapid decrease in cytochrome $P_{450}$ 2E1 protein soon after the exposure due to posttranslational inhibition(Biochem. Biophys. Res. Commun. 179:449-454, 1991). In this report, aniline hydroxylase and the amounts of immunoreactive $P_{450}$ 2E1 were rapidly decreased during day 1 to 2 and recovered during day 3 to 4 after a single dose of $CCl_4$. The activity of pentoxyresorufin-O-dealkylase was also suppressed at day 1 and began to repair from day 2. However, the decrease in immunoreactive $P_{450}$ 2C content was not observed. The decreases in $P_{450}$ 2E1 enzyme activity and immunoreactive protein by acute $CCl_4$ treatment were accompanied by a decline in $P_{450}$ 2E1 mRNA level. The data thus suggested a pretranslational reduction of $P_{450}$ 2E1 during day 1 to 2 after acute $CCl_4$ treatment.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.454-458
• /
• 2006

HSF1 is the heat shock transcription factor in Saccharomyces cerevisiae. S. cerevisiae KNU5377 can ferment at high temperature such as $40^{\b{o}}C$. We have been the subjects of intense study because Hsf1p mediates gene expression not only to heat shock, but to a variety of cellular and environmental stress challenges. Basing these facts, we firstly tried to construct the hsf1 gene-deleted mutant. PCR-method for fast production of gene disruption cassette was introduced in a thermotolerant yeast S. cerevisiae KNU5377, which allowed the addition of short flanking homology region as short as 45 bp suffice to mediate homologous recombination to kanMX module. Such a cassette is composed of linking genomic DNA of target gene to the selectable marker kanMX4 that confers geneticin (G418) resistance in yeast. That module is extensively used for PCR-based gene replacement of target gene in the laboratory strains. We describe here the generation of hsf1 gene disruption construction using PCR product of selectable marker with primers that provide homology to the hsf1 gene following separation of haploid strain in wild type yeast S. cerevisiae KNU5377. Yeast deletion overview containing replace cassette module, deletion mutant construction and strain confirmation in this study used Saccharomyces Genome Deletion Project (http:://www-sequence.standard.edu/group/yeast_deletion_project). This mutant by genetic manipulation of wild type yeast KNU5377 strain will provide a good system for analyzing the research of the molecular biology underlying their physiology and metabolic process under fermentation and improvement of their fermentative properties.

• Korean Journal of Pharmacognosy
• /
• v.31 no.4
• /
• pp.449-454
• /
• 2000

In search for plant-derived cytotoxic compounds, it was found that the $CHCl_3$ and EtOAC extracts obtained from the flowers of Paulownia coreana Uyeki (Scrophulariaceae) exhibited significant cytotoxic activity against human tumor cell lines, A549, SK-OV-3, SK-MEL-2, XF498, and HCT15. Activity-guided fractionation on the basis of the inhibitory activity against the growth of human tumor cell lines, in vitro, and repeated column chromatography afforded several cytotoxic compounds from P. coreana. The structures and stereochemistry of these compounds were established, on the basis of analysis of spectra including IR, UV, EI-MS, $^{1}H-NMR,\;^{13}C-NMR$ and some chemical transformations, as Compound PCCl $(2-hydroxy-4(15),11(13)-eudesmadien-8{\beta},12-olide)$, Compound $PCC2(2,3-dihydro-4-hydroxy-1(15),11(13)-xanthadien-8{\beta},12-olide)$, Compound PCE1 (chrysophanol), Compound PCE2 (emodin), Compound PCE3 (physcion). Cytotoxic activity of compounds obtained from P. coreana. on five tumor cells lines was evaluated by procedure of SRB methods.

• Journal of Photoscience
• /
• v.7 no.2
• /
• pp.53-58
• /
• 2000

We performed the cloning of a chalcone synthase (CHS) gene, the key enzyme in the anthocyanin biosynthesis, from the cDNA library constructed with grape suspension cells irradiated UV-B. The PCR fragment was used to cloning the CHS gene. One CHS cDNA clone containing an open reading frame and a partial stilbene synthase (STS)cDNA, the stilbene-type phytoalexin, were isolated. The CHS cDNA clone (VCHS) showed 87% sequence homology with VvCHS (V.vinifea) and 72.3% identity with VSTSY(V.vinifea). its amino acid sequences were longer than any other CHS genes as 454 residues. Two genes were weakly expressed in white light irradiated cells, but highly induced in UV-B irradiated condition during 32 hours. Interestingly, the STS was quickly and abundantly expressed from 2 hours when supplemented with jasmonic acid (JA) and the maximum expression was observed at 4 hours and then gradually decreased. But, the additional UV-B or white light quickly degraded the STS expression than only JA treated grape suspension cells. The CHS also was rapidly induced with JA and the synergistical effect was observed at the addigional light treatment of UV-B or white light. These results are indicated that CHS and STS have different response mechanisms against the environmental stresses.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.6
• /
• pp.445-454
• /
• 2015

Objective : In the present study we analyzed neuroprotective and antiapoptotic effect of the difumarate salt S-15176, as an anti-ischemic, an antioxidant and a stabilizer of mitochondrial membrane in secondary damage following spinal cord injury (SCI) in a rat model. Methods : Three groups were performed with 30 Wistar rats; control (1), trauma (2), and a trauma+S-15176 (10 mg/kg i.p., dimethyl sulfoxide) treatment (3). SCI was performed at the thoracic level using the weight-drop technique. Spinal cord tissues were collected following intracardiac perfusion in 3rd and 7th days of posttrauma. Hematoxylin and eosin staining for histopatology, terminal deoxynucleotidyl transferase dUTP nick end labeling assay for apoptotic cells and immunohistochemistry for proapoptotic cytochrome-c, Bax and caspase 9 were performed to all groups. Functional recovery test were applied to each group in 3rd and 7th days following SCI. Results : In trauma group, edematous regions, diffuse hemorrhage, necrosis, leukocyte infiltration and severe degeneration in motor neurons were observed prominently in gray matter. The number of apoptotic cells was significantly higher (p<0.05) than control group. In the S-15176-treated groups, apoptotic cell number in 3rd and 7th days (p<0.001), also cytochrome-c (p<0.001), Bax (p<0.001) and caspase 9 immunoreactive cells (p<0.001) were significantly decreased in number compared to trauma groups. Hemorrhage and edema in the focal areas were also noticed in gray matter of treatment groups. Results of the locomotor test were significantly increased in treatment group (p<0.05) when compared to trauma groups. Conclusion : We suggest that difumarate salt S-15176 prevents mitochondrial pathways of apoptosis and protects spinal cord from secondary injury and helps to preserve motor function following SCI in rats.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.443-454
• /
• 2003

This study was conducted to investigate the effects of dietary full-fat soybeans and linseed as fat sources on in vitro ruminal disappearances of dry matter and unsaturated fatty acids and fatty acids profile. The full-fat soybeans and linseed were high in linoleic acid (C18:2n-6) and $\alpha$-linolenic acid (C18:3n-3), respectively. The incubation times were 0, 3, 6, 12, 24, 48 and 72 h. After each time of incubation, medium digesta was lyophilized for analyzing its DM and fatty acids contents. DM disappearance was significantly higher in linseed treatment compared to full-fat soybeans treatment on 6 h (p<0.01), 12 h (p<0.05) and 24 h (p<0.01), but cumulative gas production was not significantly different between both treatments. Stearic acid (C18:0) content in medium digesta was increased in both soybeans and linseed as a result of complete biohydrogenation with increased incubation time and C18:0 and C18:1 contents of full-fat soybeans were significantly higher than those of linseed (p<0.05). The content of C18:2 and C18:3 in digesta of each treatment were decreased by biohydrogenation as incubation time was increased. The content of C18:2 in full-fat soybeans was significantly higher than that of linseed (p<0.05) while the content of C18:3 in linseed was significantly higher than that of full-fat soybeans (p<0.001). Net C18:0 production was significantly higher in full-fat soybeans (332.24%) than linseed (133.16%) on 72 h. Disappearance of C18:1 was significantly lower in full-fat soybeans than linseed (p<0.05), especially full-fat soybeans showed negative (-) values on 3, 6, 12 and 24 h. The disappearance of C18:3 was significantly higher in linseed than full-fat soybeans (p<0.05). The disappearance of C18-unsaturated fatty acid was significantly higher in linseed than full-fat soybeans. In conclusion, polyunsaturated fatty acid (PUFA) in both full-fat soybeans and linseed were extensively biohydrogenated. In addition, biohydrogenation of PUFA was more completed to C18:0 in full-fat soybeans than linseed, reflecting dietary PUFA composition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.338-338
• /
• 2013

Monolithic three-dimensional integrated circuits (3D-ICs) 구현 시 bonding 과정에서 발생되는 aluminum (Al) 이나 copper (Cu) 등의 interconnect metal의 확산, 열적 스트레스, 결함의 발생, 도펀트 재분포와 같은 문제들을 피하기 위해서는 저온 공정이 필수적이다. 지금까지는 polymer 기반의 bonding이나 Cu/Cu와 같은 metal 기반의 bonding 등과 같은 저온 bonding 방법이 연구되어 왔다. 그러나 이와 같은 bonding 공정들은 공정 시 void와 같은 문제가 발생하거나 공정을 위한 특수한 장비가 필수적이다. 반면, 두 물질의 합금을 이용해 녹는점을 낮추는 eutectic bonding 공정은 저온에서 공정이 가능할 뿐만 아니라 void의 발생 없이 강한 bonding 강도를 얻을 수 있다. Aluminum-germanium (Al-Ge) 및 aluminum-indium (Al-In) 등의 조합이 eutectic bonding에 이용되어 각각 $424^{\circ}C$ 및 $454^{\circ}C$의 저온 공정을 성취하였으나 여전히 $400^{\circ}C$이상의 eutectic 온도로 인해 3D-ICs의 구현 시에는 적용이 불가능하다. 이러한 metal 조합들에 비해 indium (In)과 tin (Sn)은 각각 $156^{\circ}C$ 및 $232^{\circ}C$로 굉장히 낮은 녹는점을 가지고 있기 때문에 In-Sn 조합은 약 $120^{\circ}C$ 정도의 상당히 낮은eutectic 온도를 갖는다. 따라서 본 연구팀은 In-Sn 조합을 이용하여 $200^{\circ}C$ 이하에서monolithic 3D-IC 구현 시 사용될 eutectic bonding 공정을 개발하였다. 100 nm SiO2가 증착된 Si wafer 위에 50 nm Ti 및 410 nm In을 증착하고, 다른Si wafer 위에 50 nm Ti 및 500 nm Sn을 증착하였다. Ti는 adhesion 향상 및 diffusion barrier 역할을 위해 증착되었다. In과 Sn의 두께는 binary phase diagram을 통해 In-Sn의 eutectic 온도인 $120^{\circ}C$ 지점의 조성 비율인 48 at% Sn과 52 at% In에 해당되는 410 nm (In) 그리고 500 nm (Sn)로 결정되었다. Bonding은 Tbon-100 장비를 이용하여 $140^{\circ}C$, $170^{\circ}C$ 그리고 $200^{\circ}C$에서 2,000 N의 압력으로 진행되었으며 각각의 샘플들은 scanning electron microscope (SEM)을 통해 확인된 후, 접합 강도 테스트를 진행하였다. 추가로 bonding 층의 In 및 Sn 분포를 확인하기 위하여 Si wafer 위에 Ti/In/Sn/Ti를 차례로 증착시킨 뒤 bonding 조건과 같은 온도에서 열처리하고secondary ion mass spectrometry (SIMS) profile 분석을 시행하였다. 결론적으로 본 연구를 통하여 충분히 높은 접합 강도를 갖는 In-Sn eutectic bonding 공정을 $140^{\circ}C$의 낮은 공정온도에서 성공적으로 개발하였다.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.450-454
• /
• 1998

These studies were performed to find out the possibility of automatic detection of the diseased animal with fever by farmers themselves. Firstly, the body temperature of 331 dairy cows was investigated according to major disease symptoms manifested. Secondly, AD 590 thermometer was used to take the teat temperature of the milking cows to determine the possibility of automatic taking of body temperature while milking. The temperatures of scapha of ear and coccygeal artery part were also taken fur the non-milking dairy cows and Korean native cowl 1. The average body temperature of dairy cows associated with respiratory diseases puerperal disease, or mastitis was higher than normal temperature denoting respectively 39.8,39.6, and $39.3{\circ}C.2.$ The teat temperaure of the milking dairy cows with fever($39.5~39.6{\circ}C$) and the cows with mastitis was respectively 1.02 and 0.56${\circ}C$ higher than that of normal cows. 3. The average teat temperature taken by AD 590 was 33.91, 34.93, and 34.50${\circ}C$ in normal milking dairy cows, cows with fever(39.5~39.6${\circ}C$), and cows with mastitis, respectively. 4. The mean temperatures at scapha and coccygeal part of non-milking dairy cows and Korean native cows were 35.62 and 36.63${\circ}C$, respectively. It was concluded that AD 590 thermometer would be usable for the farmers to automatirally detect the body temperature of dairy cows while milking and subsquently to find the diseased cow with fever and that the scapha of ear and coccygeal artery part of the cattle could be the body parts of simply detecting body temperature of non-milking cattle.

• BMB Reports
• /
• v.41 no.6
• /
• pp.448-454
• /
• 2008

Two full-length cDNAs, PutPMP3-1 and PutPMP3-2, encoding PMP3 family proteins were isolated from Puccinellia tenuiflora, a monocotyledonous halophyte. Expression of both genes was induced by low temperature, salt stress, dehydration, ABA, and $NaHCO_3$. Transcripts of PutPMP3-2 were more strongly induced by these stresses relative to those of PutPMP3-1, particularly under low temperature and dehydration conditions. Expression of PutPMP3-1 and PutPMP3-2 in yeast mutants lacking the PMP3 gene can functionally complement the membrane hyper-polarization and salt sensitivity phenotypes resulting from PMP3 deletion. To compare the functions of PutPMP3-1 and PutPMP3-2, the orthologous genes in rice (OsLti6a and OsLti6b) were isolated. Both OsLti6a and OsLti6b could functionally complement the loss of PMP3 in yeast. PutPMP3-2 and OsLti6a were more effective in reversing membrane hyperpolarization than PutPMP3-1 and OsLti6b. However, the four yeast transformants each showed similar levels of salt tolerance. These results imply that these PMP3 family members don't function identically under different stress tolerance conditions.

• Structural Engineering and Mechanics
• /
• v.47 no.3
• /
• pp.443-454
• /
• 2013

A leaf spring, especially the longitudinal type is liable and persistent element in automotive suspension system. In the present scenario the composite materials are widely used in the automobile industries has shown a great interest in the replacement of steel spring due to high strength by weight ratio. Previous investigations focused on stresses and displacement analysis of single leaf spring for different materials. The present work aims to design and analysis of leaf spring for two different cases by considering the Young's modulus to yield strength ratio. In the first case the analysis deals with the design and analysis of a single cantilever solid triangle beam which is an equivalent beam of a spring with three leaves having uniform strength. In the second case a 3-beams of rectangular cross section has been considered which is equivalent to a spring with three leaves. The analysis was carried out based on contact mechanics approach. The results were compared, that the fiberglass composite leaf spring is suitable for high loading capacity, reliability and efficiency.