• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.162-167
• /
• 2016

This study was carried out to investigate proper stem cutting position and air temperature to regenerate roots from cuttings of bitter gourd. 'NS454' (NS) and 'Dragon' (DR) cultivars were tested and the cutting position was cut at the 3rd node in the stem (treatment I) and cut at the central part (stem segment) between 3rd leaf and 4th leaf in the stem (treatment II). The air temperature was maintained at 18, 23, 28 and $35^{\circ}C$ in the growth chambers, respectively. The photosynthetic photon flux at the ground of a chamber was maintained in approximately $150-200{\mu}mol\;m^{-2}s^{-1}$ during the 16-hour photoperiod. The relative humidity in the chambers was maintained over 85%. After 10 days of cuttings, regardless of cutting position, DR and NS cultivars showed 100% the survival rate in the $18^{\circ}C$ or $23^{\circ}C$ treatments, however, most of plants $18^{\circ}C$ treatment had not rooting. In the $28^{\circ}C$ treatment, regardless of cutting position, DR and NS cultivars showed 100% of the rooting rate. In the $23^{\circ}C$ treatment, for DR cultivar, the node cutting showed 90% of rooting rate and the stem segment cutting showed 40% rooting rate. For NS cultivar, the node cutting showed 50% of rooting rate and the stem segment cutting showed 40% rooting rate. DR and NS cultivars have high rooting rate, while the rooting rate remarkably decreased in the $35^{\circ}C$ treatment. For DR cultivar, the stem segment cutting showed 5.3 of the highest rooting number and the node cutting showed 2.7 rooting number in the $28^{\circ}C$ treatment. NS cultivar was not significantly different the rooting regardless of cutting position. The results suggested that cutting at the stem segment cutting of bitter gourd is an effective cutting method for increasing survival rate and the air temperature should be maintained at $28^{\circ}C$.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.5
• /
• pp.452-454
• /
• 2010

Traumatic atlantoaxial rotatory fixation (AARF) with accompanying odontoid and C2 articular facet fracture is a very rare injury, and only one such case has been reported in the medical literature. We present here a case of a traumatic AARF associated with an odontoid and comminuted C2 articular facet fracture, and this was treated with skull traction and halo-vest immobilization for 3 months. After removal of the halo-vest immobilization, his neck pain was improved and his neck motion was preserved without any neurologic deficits although mild torticolis was still observed in closer inspection.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.447-454
• /
• 2013

In this research, two new complexes of N-(2-aminoethyl)-1,3-propanediamine (aepn), $[Cd(aepn)_2]I_2$ (1) and $[Cd(aepn)_2]Cl_2{\cdots}H_2O$ (2), were prepared and identified by elemental analysis, FT-IR, Raman spectroscopy and single-crystal X-ray diffraction. Geometry around the cadmium atom in two complexes by coordination of six nitrogen atoms of two aepn is distorted octahedral. If distortion in the mer-$[Cd(aepn)_2]^{2+}$ cation is disregarded, it has a $C_2$ axis and $C_2$ symmetry. The cyclic voltammetry experiments were carried out to study the complexation process. Two structural surveys on coordination modes and complexes of aepn are presented. A study was carried out using CSD data to estimate the averages of bond lengths for different types of the Cd-N bonds. It was found that the intermolecular $N-H{\cdots}I$, $C-H{\cdots}I$ hydrogen bonds in 1 and $N-H{\cdots}Cl$, $N-H{\cdots}O$, $C-H{\cdots}O$, $O-H{\cdots}Cl$ in 2 stabilized the crystal networks.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.447-454
• /
• 2003

Samples were prepared by the solid-state reaction method. The nominal composition of the samples was B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{delta}$ prepared from powder of B $i_2$ $O_3$, PbO, SrC $O_3$, CaC $O_3$, and CuO. They were pulverized, mixed with AgO, A $u_2$ $O_3$and MgO of 50 wt%. Finally, they were sintered at 820 to 85$0^{\circ}C$ in air. The structural characteristics, the microstructure of surface and the critical temperature with respect to the each samples were analyzed by XRD, $T_{c}$, SEM and EDS respectively. It was found that the the critical temperature of the silver oxide additive samples (99.58 K) is higher than those of gold or magnesium oxides additive samples, but all those values are lower than that of pure Bi-2223 phase. The microstructure of surface showed the tendency which the AgO additive samples become more minuteness than A $u_2$ $O_3$ and MgO additive samples.s.samples.s.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.672-680
• /
• 2011

The purpose of this study has been carried to develop a criterion for the selection of evaluation factors on Forest Carbon Cycle Community(F.C.C.C) based on the result of survey of 96 participants who were operation managers on mountain eco village(31), relevant experts(33), and officers of local government(32). For analysis of the results of survey, DHP(Delphi Hierarchy Process) method was used which is a combination of Delphi method and AHP(Analytic Hierarchy Process) method. The key factors on selection of a suitable area to launch F.C.C.C. project of Korea Forest Service was selected under three hierarchical classes. Class 1 comprises 3 indices(Physical resource index, Human resource index, Vision index), and Class 2 which contains 10 indices (Existing resource, Surroundings resource, Forest biomass resource, Humanities Social quality, Local resident participation, Leader's ability, External support, Planning of operation, Capability of operation, and Effect of operation). Class 3 is sub-level class of class which possess 38 indices. From the results of analysis, Consistency Index(C.I) of each index in the 3 classes was used as evaluation factor. In Class 1, index 'human resources' showed highest Consistency Index(0.454). In Class 2, index 'forest biomass resources' was the highest Consistency Index(0.376) in 'physical resources' of Class 1, index 'leader's ability' was the highest Consistency Index(0.326) in 'human resources' of Class 1, and index 'planning of operation' was the highest Consistency Index(0.346) in 'vision' of Class 1. In Class 3, relative importance of 38 index including 'Joint ownership land security(C.I.-0.266)' was evaluated. Based on the result of this study, a criterion for the selection of evaluation factors for F.C.C.C was developed and the evaluation criterion is expected to be use to select of a suitable area to launch F.C.C.C. project since 2011.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.380-384
• /
• 2002

This study has been carried out to investigate the composition of fatty Acids, organic acids, minerals, vitamin C, total phenolics and saponin in 30$\^{C}$ hot air dried powder of main and lateral root of Acorus calamus L. Major saturated fatty acids were identified caprylic acid, pentadecanoic acid, stearic acid and heneicosanoic acid, etc.. Content of caprylic acid in main and lateral root were 28.35% and 31.44%. Unsaturated fatty acids such as linoleic acid, palmitoeic acid and linoleic acid was highly contented, linoleic acid was highest contented 25.55% in main root and 23.43% in lateral root. Succinic acid was the most abundant organic acid of root content of main and lateral root were 2,790 mg% and 2,630 mg%. Potassium was found to be the mon predominant mineral in root, followed by calcium, phosphorus and magnesium, in a order. Contents of potassium in main and lateral root account for 194 mg% and 454 mg%, respectively. Contents of these minerals in lateral root were higher value than that in main root. Contents of ascorbic acid and total phenolics were 113.8 $\mu\textrm{g}$/g and 463 mg％ in main root, 125.1 $\mu\textrm{g}$/g and 474 mg% in lateral root, respectively. Crude saponin content of main and lateral mot were high level amount, 2.51 ％ and 3.39 %.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.454-461
• /
• 2004

The purpose of this study is to compare and to evaluate the effects of the degree of saturation on the progression of artificial root caries lesion. A total of 8 human premolars without any defects and cracks selected and the cementum were removed and the teeth were cleaned with ultrasonic device and pumice without fluoride. Each tooth was sectioned into 6 pieces and they were ground with #800 sandpaper until they had a thickness of 200pm. Specimens were applied with nail vanish except for the 2-3 mm window area after application of bonding agent. Under the constant pH, the specimens were divided into 6 groups (degree of saturation: 0.1415, 0.1503, 0.1597, 0.1676, 0.1771. 0.1977). Each group was immersed in acid buffer solution for 1. 2, 3, 5 days under controlled temperature ($25^{\circ}C$) and imbibed in water and examined using the polarizing microscope. The results were as follows 1. Although the degree of saturation of demineralization solution decreased, the depth of penetration in the dentin was constant. 2. Erosion was observed on the surface of all the teeth in the group I, II. In the group III, IV, V, surfaces were not changed. The teeth in the group VI showed the more mineralized surface but not the shape of the dentinal tubules distinctively. 3. In all groups, the lesion progressed rapidly at the first day of the experiment, but increased gradually as time elapsed.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.454-460
• /
• 2016

Double-layered Al-Mg films have been deposited by using an e-beam deposition method on a cold-rolled steel sheet(CR), which the structure of the film was Al/Mg/CR. The micro-structure, alloy phase, and corrosion resistance of the Al-Mg coated CR were investigated before and after heat treatment at $400^{\circ}C$ for 2, 3, and 10 min in a nitrogen atmosphere. Total thickness of Al-Mg films was fixed at $3{\mu}m$ and the thickness ratio of Al and Mg layers(Al:Mg) has been changed from 5:1 to 1:5. The cross-sectional morphology of the films, which had the thickness ratio of 2:1(Al:Mg), 1:1, and 1:2, was changed after heat treatment from columnar to featureless structure. The x-ray diffraction data for as-deposited films showed only pure Al and Mg peaks. Al-Mg alloy peaks such as $Al_3Mg_2$ and $Al_{12}Mg_{17}$ phase appeared after the heat treatment. The Al-Mg coating with the thickness ratio of 1:1(Al:Mg) showed the best corrosion resistance of up to 500 hours by salt spray test.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.225-228
• /
• 2005

We have grown the long persistent $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ phosphor single crystal by Verneuil method. The obtained single crystals were long persistent phosphorescence peaking at ${\lambda}=520nm$ with a size of about 5 mm diameter, 55 mm length. The melting temperature of $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ measured $T_{mp}=1968^{\circ}C$. The optimum composition was $SrCO_3:Al(OH)_3:Eu_2O_3:Dy_2O_3$ = 1 : 2 : 0.015 : 0.02. Flow rate of $H_2:O_2$ is about 4 : 1. Growthing rate is about 5 mm/hr. The spectra of the phosphorescence from the crystals are quite similar to those obtained with sintered powders used for luminous pigments. The crystalline structure of long persistent $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ phosphor single crystal was determined by X-ray diffraction.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.287-294
• /
• 1997

When bread making, the condition of thawing-fermentation for frozen dough were tested in variable temperature, and measured thawing-fermentation time and volume of frozen dough. L-Ascorbic acid (L-Aa) was added in frozen dough for the comparison test of develop volume in bread staling degree of baking bread were measured additive frozen dough which was stoppages in freezing, staling degrees were tested hardness with Rheometer. The test for comparison of thawing-fermentation time in variable temperature was shown the condition of dough conditioner at 3$0^{\circ}C$ was most effective for bread making, Because That condition was required very short time(74 min) But, in this comparison of volume in final products was shown the products in the condition of thawing-fermentation at 3$0^{\circ}C$ was smaller than the products at 5$^{\circ}C$(418 ml). The baking volume of L-Aa additive frozen dough which has under gone thawing-fermentation at 3$0^{\circ}C$, were shown baking volume of 420 ml in 2 weeks storage terms to 100 mg/kg L-Aa additive dough and shown baking volume of 454 ml in 4 weeks storage terms to dough of 200 mg/kg additive weight. Staling degrees of L-Aa additive frozen bread were measured with Rheometer. The hardness of 100 mg/kg L-Aa additive frozen bread was sown low level hardness in 1~2 weeks freezing term, 150 mg/kg L-Aa additive frozen bread was shown low level hardness in 3 weeks freezing term. In 4 weeks freezing term, 200 mg/kg L-Aa additive frozen bread was shown low level hardness compared with non-additive L-Aa frozen bread. In comparison of frozen bread quality, non-additive L-Aa products was better than additive L-Aa products in equality of baking shape and external apparence. But in total quality in external and internal apparence, additive L-Aa products was better than non-additive L-Aa products.