• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.337-343
• /
• 2022

The aim of this study was to evaluate anxiety, depression and stress in women with polycystic ovary syndrome(PCOS) and to investigate the risk factors related to psychological difficulties. Sixty women with PCOS were evaluated for level of psychological stress using Beck depression inventory(BDI) and Depression anxiety stress scale(DASS) questionnaire. Serum antimullerian hormone, total testosterone, lutenizing hormone, follicle stimulating hormone, estradiol, lipid profile and 75g oral glucose tolerance test were measured. Thirty healthy women served as the control. Fifty two women with PCOS and 29 healthy women completed a questionnaire. Women with depression who scored >13 by BDI and >10 by DASS were 38.5 %, women with anxiety who scored >8 by DASS were 23.1 %, and women with stress who scored >15 by DASS were 30.8 %, which were significantly higher than control. In PCOS women, total testosterone, LH and AMH were significantly correlated with depression and stress. Weight, body mass index and waist-hip ratio were also significantly correlated with depression. In women diagnosed as diabetes and hyperlipidemia, depression and stress were significantly prevalent. Women with PCOS seemed to be more vulnerable to depression, anxiety and stress. Early diagnosis and management should be considered.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.202-208
• /
• 2021

Induced polarization (IP) was first published in a Korean academic journal in 1973, and it was soon applied to coal and metal ore exploration. Then, in universities and research institutes, IP modeling studies using the finite element approach and experimental studies on IP responses for artificial samples were conducted. In the mid-1980s, the spectral IP (SIP) measurement module was introduced to Korea, and physical scale modeling and inversion approaches were developed. Due to the decline of the mineral resource industry, this method was not actively applied. However, the SIP method was not applied In the 1990s, IP exploration was applied in the investigation of hydrothermal deposits of sulfide minerals and bentonite mineralization zones, as well as to areas where the groundwater was contaminated by intruding seawater. In the 2000s, three-dimensional inversion of the IP approach was developed, and high-precision geophysical exploration was required to secure domestic and overseas mineral resources, so SIP experiments on rock samples and approaches for field exploration were developed. The SIP approach was proven useful for the exploration of metal deposits containing sulfide minerals by applying it to explore the mineralization zone of gold-silver deposits in the Haenam region. The IP method is considered to be effective in exploring critical minerals (lithium, cobalt, and nickel) in high-tech industries. It also is expected to be useful for environmental and geotechnical investigations.

• Animal Bioscience
• /
• v.35 no.2
• /
• pp.184-195
• /
• 2022

Objective: In this study we aimed to evaluate the effect of dietary live yeast supplementation on ruminal pH pattern, fermentation characteristics and associated bacteria in beef cattle. Methods: This work comprised of in vitro and in vivo experiments. In vitro fermentation was conducted by incubating 0%, 0.05%, 0.075%, 0.1%, 0.125%, and 0.15% active dried yeast (Saccharomyces cerevisiae, ADY) with total mixed ration substrate to determine its dose effect. According to in vitro results, 0.1% ADY inclusion level was assigned in in vivo study for continuously monitoring ruminal fermentation characteristics and microbes. Six ruminally cannulated steers were randomly assigned to 2 treatments (Control and ADY supplementation) as two-period crossover design (30-day). Blood samples were harvested before-feeding and rumen fluid was sampled at 0, 3, 6, 9, and 12 h post-feeding on 30 d. Results: After 24 h in vitro fermentation, pH and gas production were increased at 0.1% ADY where ammonia nitrogen and microbial crude protein also displayed lowest and peak values, respectively. Acetate, butyrate and total volatile fatty acids concentrations heightened with increasing ADY doses and plateaued at high levels, while acetate to propionate ratio was decreased accordingly. In in vivo study, ruminal pH was increased with ADY supplementation that also elevated acetate and propionate. Conversely, ADY reduced lactate level by dampening Streptococcus bovis and inducing greater Selenomonas ruminantium and Megasphaera elsdenii populations involved in lactate utilization. The serum urea nitrogen decreased, whereas glucose, albumin and total protein concentrations were increased with ADY supplementation. Conclusion: The results demonstrated dietary ADY improved ruminal fermentation dose-dependently. The ruminal lactate reduction through modification of lactate metabolic bacteria could be an important reason for rumen pH stabilization induced by ADY. ADY supplementation offered a complementary probiotics strategy in improving gluconeogenesis and nitrogen metabolism of beef cattle, potentially resulted from optimized rumen pH and fermentation.

• Journal of Environmental Health Sciences
• /
• v.48 no.2
• /
• pp.66-74
• /
• 2022

Background: The health effects of particulate matter (PM_2.5) bonded with various harmful chemicals differ based on their composition, so investigating and managing their concentrations and composition is vital for long-term management. As industrial complexes emit considerable quantities of pollutants, higher PM_2.5 concentrations and chemical component effects are expected than in other places. Objectives: We investigated the concentration distribution ratios of PM_2.5 chemical components to provide basic data to inform future major emissions control and PM_2.5 reduction measures in industrial complexes. Methods: We monitored five sites near the Ansan and Siheung industrial complexes from August 2020 to July 2021. Samples were collected and analyzed twice per week in spring/winter and once per week in summer/autumn according to the National Institute of Environmental Research in the Ministry of Environments' Air Pollution Monitoring Network Installation and Operation Guidelines. We investigated and compared composition ratios of 29 ions, carbon, and elemental components in PM_2.5. Results: The analysis of PM_2.5 components at the five sites revealed that ion components accounted for the greatest total mass at approximately 50% while carbon components and elemental components contributed 23~28% and 8~10%, respectively. Among the ionic components, NO₃^- occupies the greatest proportion. OC occupies the greatest proportion of the carbon components and sulphur occupies the greatest proportion of elemental components. Conclusions: This study investigated the concentration distribution ratios of PM_2.5 chemical components in industrial complexes. We believe these results provide basic chemical component concentration ratio data for establishing future air management policies and plans for the Ansan and Siheung industrial complexes.

• Journal of Plant Biotechnology
• /
• v.49 no.1
• /
• pp.82-89
• /
• 2022

In vitro techniques were developed for propagating Vaccinium oldhamii using shoots with apical buds. Explants having an apical bud were cultured on Murashige and Skoog (MS) medium supplemented with 1.0, 2.0, and 5.0 mg/L of each zeatin, thidiazuron, 6-benzylaminopurine (BA), and 6-(γ,γ-dimethylallylamino)purine (2-iP) in order to induce multiple shoots. Among the tested treatments, the 2.0 mg/L of 2-iP proved to be most suited for the multiplication and growth of shoots; the multiple shoot induction rate was 100.0%, the average number of shoots was 7.4 per explant, and the average shoot length was 51.7 mm. The in vitro elongated shoots were rooted on half-strength MS medium containing various concentrations of indole-3-butyric acid (IBA) and 1-naphthaleneacetic acid (NAA). However, overall callus overgrowth was observed in all treatments and resulted in necrosis and abnormal shoot growth in root formation. A low concentration (0.5 mg/L) of IBA was appropriate for normal root development and the in vitro rooting rate was 30%. Ex vitro treatments on root formation using various concentrations of IBA with Talc powder and two types of rooting substrates (Flexi-Plugs or Horticultural soil) were examined. The ex vitro rooting rate (80%) and length of roots (32.9 mm) were obtained when the cut ends of the shoots were treated with 1.0 mg/L IBA and cultivated in Horticultural soil for 2 months. These findings suggest that ex vitro rooting is the more effective method for improving root formation in Vaccinium oldhamii than in vitro rooting.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.1-17
• /
• 2022

This study analyzed the PM_2.5 pattern by using data measured for one year from June 2020 to May 2021 by 21 low-cost sensors installed near the Changwon National Industrial Complex in Changwon, Gyeongsangnam-do. For the PM_2.5 pattern, the land use types around the measuring points and meteorological factors such as air temperature and wind speed were considered. The PM_2.5 concentration was high from November to March in winter, and from 1 to 9 in the morning and early in the morning by time zone. The concentration of PM_2.5 was higher as it got closer to the industrial area, but the concentration was lower in the residential area and public facility area. In terms of meteorological factors, the higher the air temperature and wind speed, the lower the concentration of PM_2.5. As a result of this study, it was possible to identify the PM_2.5 patter near Changwon National Industrial Complex. This result will be useful data that can be used in urban and environmental planning to improve air quality including PM_2.5 in urban area in the future.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.505-515
• /
• 2021

Creep properties of directionally solidified Ni-based superalloy CM247LC under various temperature and stress conditions have been investigated. In the heat-treated specimen, some portion of eutectic γ-γ' remained, and uniform cubic γ' was observed in the dendrites. At low temperature (750℃) and high stress condition, a large amount of deformation occurred during the primary creep, while the tertiary creep region accounted for most of the creep deformation under high temperature and low stress condition. γ' particles are sheared by dislocation dissociated into super lattice partial dislocations separated by stacking faults at 750℃. No stacking faults in γ' were found at and above 850℃ due to the temperature dependence of the stacking fault energy. Raft structure of γ' was found after creep test at high temperature of 950℃ and 1000℃. At 850℃, the deformation mechanism was shown to be dependent on the stress condition, and so rafting was observed only under low stress condition.

• Journal of agricultural medicine and community health
• /
• v.47 no.1
• /
• pp.14-26
• /
• 2022

Objectives: Handwashing is one of the most effective methods to prevent the spread of infectious diseases. This study assessed the related factors and reasons for not practicing handwashing at school among adolescents. Methods: We analyzed data collected from 57,303 adolescents who participated in the 15th Korea Youth Risk Behavior Survey 2019. Results: The proportions of not washing hands "before meals at school" and "after using the toilet at school" were 15.9% and 4.4%, respectively. The adjusted odds ratio for not washing hands before meals at school was significantly higher in girls (Odds Ratio [OR]=1.52, 95% Confidence Intervals [CI]=1.42-1.63), metropolitan city (OR=1.32, 95% CI=1.11-1.56), city (OR=1.29, 95% CI=1.08-1.54), higher grade, higher academic performance, lower economic status, not handwashing at home (OR=14.36, 95% CI=13.37-15.42), and without annual personal hygiene education (OR=1.41, 95% CI=1.33-1.49). Reasons for not washing hands at school among adolescents who do not wash their hands before meals at school included 'it is bothersome (52.3%)', 'there is no soap or hand sanitizer (13.8%)', and 'I do not feel the need (9.5%)'. Conclusions: Improving handwashing before meals at school among adolescents requires raising awareness of the importance of handwashing before meals and establishing a suitable environment and handwashing-encouraging culture.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.209-217
• /
• 2022

In this study, Enterococcus faecalis BMSE-HMP005 isolated from human breast milk demonstrated antimicrobial effects against multidrug-resistant (MDR) bacterial strains. The bacteriocin produced by E. faecalis BMSE-HMP005 was fractionated using reverse-phase high-performance liquid chromatography. This fraction showed antimicrobial effects against both gram-positive and gram-negative MDR bacteria. No hemolytic reactions were observed. E. faecalis BMSEHMP005 was resistant to vancomycin; however, kanamycin, ampicillin, and erythromycin showed minimum inhibitory concentrations that were lower than the acceptable range provided by the European Food Safety Authority. For artificial gastric juice and bile acid, the survival rates were 98.67% and 95.70%, respectively. These results show the potential utility of E. faecalis BMSE-HMP005 as a probiotic with remarkable antimicrobial effects against MDR bacteria.