• 제목/요약/키워드: 3A

검색결과 366,467건 처리시간 0.173초

히스톤 H3K4 메칠화효소 SET1A에 의한 지방세포 분화 촉진 (Histone H3K4 Methyltransferase SET1A Stimulates the Adipogenesis of 3T3-L1 Preadipocytes)

  • 김선후;정명호
    • 생명과학회지
    • /
    • 제27권10호
    • /
    • pp.1104-1110
    • /
    • 2017
  • 히스톤 H3K4의 메칠화는 3T3-L1의 지방세포의 분화를 촉진하는 것으로 알려져 있으나, 히스톤 H3K4 메칠화 효소인 SET1A가 지방세포 분화를 조절하는지에 대해서는 보고된 바가 없다. 그러므로 본 연구에서는 SET1A의 3T3-L1 지방세포의 분화조절과 기전을 연구하였다. SET1A의 발현은 3T3-L1 지방세포 분화과정에서 증가함을 관찰하였다. 3T3-L1 지방전구세포에서 siRNA을 이용하여 SET1A의 발현을 감소시키면 3T3-L1 지방전구세포의 분화가 억제됨을 관찰하여 SET1A가 3T3-L1 지방전구세포의 분화를 촉진함을 알 수 있었다. 이에 대한 조절기전을 알기 위해, SET1A의 발현을 감소시킨 3T3-L1 지방전구세포의 세포증식을 측정한 결과, 분화 초기 단계인 분화 후 2일 동안 3T3-L1 지방세포의 증식이 감소하였다. 또한 분화 후 7일 동안 지방세포세포 분화 조절인자들의 발현을 측정한 결과, SET1A의 발현을 감소시킨 3T3-L1 지방세포에서 $PPAR{\gamma}$의 발현이 감소하였다. 위와 같은 연구결과를 바탕으로, SET1A는 분화초기단계에서는 mitotic clonal expansion 단계를 촉진하고, 분화후기단계에서는 $PPAR{\gamma}$의 발현을 증가시켜 3T3-L1 지방세포의 분화를 촉진함을 알 수 있었다.

Planetscope 영상을 이용한 KOMPSAT-3/3A 영상의 기하품질 향상 방안 연구 (A Study on the Improvement of Geometric Quality of KOMPSAT-3/3A Imagery Using Planetscope Imagery)

  • 정민영;강원빈;송아람;김용일
    • 한국측량학회지
    • /
    • 제38권4호
    • /
    • pp.327-343
    • /
    • 2020
  • 본 연구는 효율적인 재난 피해 분석을 위해 재난 후 KOMPSAT (Korea Multi-Purpose Satellite)-3/3A Level 1R 영상의 기하품질을 향상하는 방법을 제안한다. 제안 기법은 재난상황에 대한 데이터 수급의 한계를 해결하고자, 영상 수급이 원활한 Planetscope 정사영상과 KOMPSAT-3/3A 영상에 격자기반 SIFT (Scale Invariant Feature Transform) 기법을 적용하여 RPC (Rational Polynomial Coefficient) 보정에 필요한 GCP (Ground Control Point, 지상기준점)를 취득한다. 제안 기법을 검증하기 위해 2019년 4월 강릉 산불 피해 지역의 KOMPSAT-3 영상과 토지피복의 다양성을 고려하여 추가된 대전지역 KOMPSAT-3A 영상에 제안 기법을 적용하였다. 생성된 KOMPSAT-3/3A 정사영상의 기하품질을 검증한 결과, KOMPSAT-3 다중분광 영상의 위치오차 (RMSE: Root Mean Square Error)가 6.62화소에서 1.25화소로, KOMPSAT-3A의 경우 7.03화소에서 1.66화소로 감소되어 영상의 기하품질이 향상됨을 확인하였다. 기하품질이 향상된 KOMPSAT-3 정사영상은 산불 발생 전 Planetscope 정사영상과 비교되었으며, 이를 통해 향상된 기하품질이 산불 피해 지역 분석에 적합하다고 판단하였다. 본 연구는 GCP 취득의 대안으로 Planetscope 정사영상의 사용 가능성을 보여주었으며, 제안 기법은 재난 상황뿐만 아니라 Planetscope 영상의 수급이 가능한 다양한 KOMPSAT-3/3A 활용연구에 적용될 수 있을 것으로 예상된다.

FLARE 타겟을 이용한 다목적위성3호/3A호의 절대복사 검보정 계수 산출 (Experiment of KOMPSAT-3/3A Absolute Radiometric Calibration Coefficients Estimation Using FLARE Target)

  • 진경욱;박대순
    • 대한원격탐사학회지
    • /
    • 제39권6_1호
    • /
    • pp.1389-1399
    • /
    • 2023
  • Field Line of sight Automated Radiance Exposure (FLARE) 시스템을 이용하여 다목적위성3호/3A호의 절대복사 검보정 연구를 수행하였다. FLARE는 미국의 Labshphere사에 의해 개발된 시스템으로 SPecular Array Radiometric Calibration (SPARC) 개념을 적용한 것이다. FLARE는 거울처럼 반사하는 거울 타겟을 사용하여 산란되는 복사에너지의 원인 요소들을 최소화시킨 단순한 복사보정 방법을 제공한다. FLARE 시스템이 장착된 사이트를 통과하는 다목적위성3호/3A호를 이용한 영상자료 획득을 위해 2021년 7월 5일부터 7월 15일 사이에 필드캠페인을 진행하였다. 기상 상황 때문에 여러 번의 관측 자료 가운데 2개의 다목적위성3호 관측자료만이 유효한 샘플 영상으로 확인되었다. FLARE 시스템과 다목적위성3호 관측 자료를 바탕으로 절대복사 검보정 계수를 산출하였다. 7월 7일과 7월 13일 획득된 2개의 FLARE 관측 자료를 통해 계산된 결과는 근적외 채널을 제외하고 1% 이내의 매우 유사한 결과를 보여 주었다. 2021년 8월 획득된 다목적위성3호/3A호 자료를 추가하여 분석한 결과, 현재의 메타 데이터에 할당된 위성들의 이득값들과는 상당한 차이를 보였다. 제한된 획득자료로 인해 FLARE 시스템을 실제 운영 중인 다목적위성3호/3A호에 대한 절대복사 검보정 계수 산출 용도로 사용하기 위해서는 추가적인 연구가 필요할 것으로 판단된다.

THE NUMBER OF POINTS ON ELLIPTIC CURVES E0a3:y2=x3+a3 OVER Fp MOD 24

  • You, Soon-Ho;Park, Hwa-Sin;Kim, Hyun
    • 호남수학학술지
    • /
    • 제31권3호
    • /
    • pp.437-449
    • /
    • 2009
  • In this paper, we calculate the number of points on elliptic curves $E^{a^3}_0:y^2=x^3+a^3$ over ${\mathbb{F}}_p$ mod 24 and $E^b_0:y^2=x^3+b$ over ${\mathbb{F}}_p$ mod 6, where b is cubic non-residue in ${\mathbb{F}}^*_p$. For example, if p ${\equiv}$ 1 (mod 12) is a prime, and a and a(2t - 3) are quadratic residues modulo p with $3t^2{\equiv}1$ (mod p), then the number of points in $E^{a^3}_0:y^2=x^3+a^3$ is congruent to 0 modulo 24.

Synthesis of sulphonic acids and sultam derivatives

  • Ismail, Ibrahim-Imam
    • Archives of Pharmacal Research
    • /
    • 제13권1호
    • /
    • pp.1-4
    • /
    • 1990
  • Reaction of propane-1, 3-sultone with amines gave N-substituted aminosulphonnic acids 2a-i, Dehydration of 2a-c with $POCI_3$ gave the corresponding sultams 3a-c. Propane-1, 3-sultone 1 reacted with tertury amines to give the betaiene salts 4-11. 2-4-Dimethyl-1, 3-butadiene-1, 4-sultone 12 condensed with amines to give N-substituted-2, 4-dimethyl-1, 3-butadiene-1, 4-sultames 13a and 13b. The reaction of 3a, 13a with hydrazine hydrate gave acid hydrazides 3d or 13c. Compounds 3d, 13c reacted with isocyanates to yield urea derivatives 14a-c, 15a-c.

  • PDF

Electrochemical Properties of 1,1-Dialkyl-2,5-bis(trimethylsilylethynyl)siloles as Anode Active Material and Solid-state Electrolyte for Lithium-ion Batteries

  • Hyeong Rok Si;Young Tae Park
    • 대한화학회지
    • /
    • 제67권6호
    • /
    • pp.429-440
    • /
    • 2023
  • 1,1-Dialkyl-2,5-bis(trimethylsilylethynyl)-3,4-diphenylsiloles (R=Et, i-Pr, n-Hex; 3a-c) were prepared and utilized as anode active materials for lithium-ion batteries; 3a was also used as a filler for the solid-state electrolytes (SSE). Siloles 3a-c were prepared by substitution reactions in which the two bromine groups of 1,1-dialkyl-2,5-dibromo-3,4-diphe- nylsiloles, used as precursors, were substituted with trimethylsilylacetylene in the presence of palladium chloride, copper iodide, and triphenylphosphine in diisopropylamine. Among siloles 3a-c, 3a had the best electrochemical properties as an anode material for lithium-ion batteries, including an initial capacity of 758 mAhg-1 (0.1 A/g), which was reduced to 547 mAhg-1 and then increased to 1,225 mAhg-1 at 500 cycles. A 3a-composite polymer electrolyte (3a-CPE) was prepared using silole 3a as an additive at concentrations of 1, 2, 3, and 4 wt.%. The 2 wt.% 3a-CPE composite afforded an excellent ionic conductivity of 1.09 × 10-3 Scm-1 at 60℃, indicating that silole 3a has potential applicability as an anode active material for lithium-ion batteries, and can also be used as an additive for the SSE of lithium-ion batteries.

Pseudomonas synxantha A3가 생성하는 siderophore A3에 관한 연구 (Biochemical studies of the siderophore A3 produced by pseudomonas synxantha A3)

  • 전홍기;강호영;고철종;백형석
    • 미생물학회지
    • /
    • 제29권5호
    • /
    • pp.307-313
    • /
    • 1991
  • A yellow-green, fluorescent siderophore A3 was extracellularly produced under iron-limited growth conditions from Pseudomonas synxantha A3. The physicochemical and biological properties of siderophore A3 were examined. The approxiamte molecular weights of the Fe(III)-siderophore A3-1 complex and Fe(III)-siderophore A3-2 complex were estimated to be about 1,300 and 1,100, respectively, by Bio-gel P2 gel exclusion chromatography. The molar ratio between the siderophore and the Fe(III)was 1.08 mole. The molecular weight of the complex could be calculated with this ratio and the new values were 1,150 and 960, respectively. The binding constant(K) between thesiderophore A3 and Fe(III) that determined by displacing the iron from the Fe(III)-siderophore complex with EDTA was 4.12*10$^{18}$ at pH 5.0. Siderophore A3 appeared to have antibacterial activity on several bacterial strains, however, ferric siderophore Ae complex did not show that activity. The cytotoxicity of siderophore A3 was obtained from Human Chronic Myelogenous Leudemia K562 cells. Inhibition concentration (50%)($IC_{50}$ ) was $0.17\mu$\{g/ml}.

  • PDF

C3S-C3A계의 초기 수화반응 특성에 미치는 석고의 영향 (I) (Effect of Gypsum on the Characteristics of Early Hydration of the System C3S-C3A (I))

  • 신규연;한기성
    • 한국세라믹학회지
    • /
    • 제26권4호
    • /
    • pp.514-520
    • /
    • 1989
  • The early hydration characteristics according to the C3S/C3A ratio and presence of gypsum, in order to establish the hydration mechanism of the system C3S-C3A, have been studied. The rate of C3S dissolution in the system C3S-Gypsum was higher than that in the system C3S. Consequently, the induction period was reduced and the rate of Ca(OH)2 formation in the accleration period was increased. The hydration of C3S in the system C3S-C3A was retarded because Al3+ in the liquid phase originating from the hydration of C3A was incorporated into calcium hydrosilicates formed. The retardation phenomenon of C3S hydration was not appeared in the system C3S-C3A-gypsum because the reaction of monosulfate formation became the rate-determining step.

  • PDF

$(3aR^*,6aS^*)$-6a-Hydroxy-cyclopenta[b]pyrrole-3a-carboxylate의 부제합성 및 NMR 스텍트럼을 통한 입체구조의 결정 ([$(3aR^*,6aS^*)$-6a-Hydroxy-Asymmetric Synthesis of cyclopenta[b]pyrrole-3a-carboxylate and Determination of Its Stereostructure via NMR Spectrum)

  • 권순경;박명숙;서원준
    • 약학회지
    • /
    • 제38권5호
    • /
    • pp.544-554
    • /
    • 1994
  • Pyrrolidine-2,3-dione derivative A was synthesized from oxalylation of chiral enamine Ba. The stereostructure of its major diastereomer $(A_{maj})$ was determined as octahydro-2,3-dioxo-6aS-hyd roxy-1-(1S-methoxycarbonyl-2-phenylethyl)-cyclopenta[b]pyrrole-3aR-carboxylic acid ethyl ester Aa by means of NMR spectrum. This result implied that the asymmetric carbon-carbon bond forming reaction occurred preferentially at the ${\beta}-face$ of Ba.

  • PDF

조대 Si입자분말을 사용한 질화반응 Si3N4의 치밀화 거동 (Densification Behavior of Reaction-Bonded Silicon Nitride Prepared by Using Coarse Si Powders)

  • 이주신;문지훈;한병동;박동수;김해두
    • 한국세라믹학회지
    • /
    • 제39권1호
    • /
    • pp.45-50
    • /
    • 2002
  • 평균입경 25$\mu m$의 Si조대분말에 소결조제의 조성과 양을 변화시켜 질화반응 질화규소 (RBSN)세라믹스를 제조할 때 나타나는 치밀화 거동, 미세구조의 발달 및 기계적 특성에 대하여 고찰하였다. 6wt% $Y_2O_3$ + 1wt% $Al_2O_3$(6YlA)의 소결조제를 첨가한 경우에는 치밀화를 이루지 못하였으나, 6wt% $Y_2O_3+3\;wt%\;Al_2O_3+2\;wt%\;SiO_2(6Y3A2S)$와 9wt% $Y_2O_3$+1.5wt% $A1_2O_3$+ 3w% $SiO_2$(9Yl.5A3S)의 소결조제를 첨가하여 이론밀도에 가까운 치밀화를 이루었다. $1900^{\circ}C$에서 소결한 6Y3A2S시편의 경우, 960MPa의 높은 파괴강도값과 $6.5MPa.m^{1/2}$의 파괴인성값을 얻었다.