• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.5
• /
• pp.441-450
• /
• 2016

The International Telecommunications Union(: ITU) Radio Regulations(: RR) and in which is defined as the frequency of electromagnetic waves below 3000GHz spread in space without artificial guidance, our country also follows the international definition. As radio waves are electromagnetic waves spreading in space without artificial induction means having a frequency within the range set by the ITU. Frequency distribution for dual-work is to inde 300GHz, among the divided frequency is our daily or less than 90% of the frequency band is in contact saenghwalyong 3GHz. Propagation, but can occur indefinitely without depleting that anyone can create only gatchumyeon transmission equipment, if the radio frequency to use at the same time and space, the soul is the interference occurs is not available radio resources. Due to the physical finiteness used in our country for the first time on such a propagation laws enacted in 1961 and to the state radio resource management, and rules to be used for propagation only if granted the rights.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.906-912
• /
• 2006

In this paper, N-shaped slot antenna for $5.15GHz{\sim}5.35GHz$ is designed, fabricated, and measured. The prototype consist of meander corrugated N-shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are N-slot length, width, position, air-gap height, and feed point position. From these parameters optimized, a four N-shaped slot antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication N-shaped slot antenna is 5.25GHz bandwidth for approximately 300MHz(VSWR<2.0) and the gain is $1.3{\sim}2.64dBi$. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and E-Plane are $80.21^{\circ}\;and\;103.38^{\circ}$, respectively.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.126-131
• /
• 2017

Millimeter waves are electromagnetic waves with frequencies of 30-300 GHz (wavelength 1-10 mm), and millimeter wave stimulation affects microorganism growth. The present study stimulated Bacillus subtilis with 60 and 70 GHz millimeter waves during cheonggukjang fermentation and characterized the effects on cheonggukjang quality. Cheonggukjang treated with millimeter wave irradiation showed no significant difference in total bacterial count but generated only 5.52-5.92% viscous substance. Irradiation with 60 GHz millimeter waves yielded bright and intense color values relative to 70 GHz millimeter waves. Examination of the amylase activity and reducing sugar content of finished cheonggukjang revealed that irradiation at 70 GHz inhibited amylase activity in cheonggukjang. Furthermore, irradiation at 70 GHz increased protease activity, whereas irradiation at 60 GHz inhibited the activity. Moreover, the amino acid content changed with millimeter wave irradiation.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.413-414
• /
• 2008

A 2.4 GHz low phase noise fully integrated LC voltage-controlled oscillator (VCO) in $0.18\;{\mu}m$ CMOS technology is presented in this paper. The VCO is optimized based on phase noise reduction. The design of the VCO uses differential varactors which are adopted for symmetry of the circuit, and consider AM-PM conversion due to a cross-coupled pair. The VCO is designed to draw 3 mA from 1.8 V supply voltage. Simulated phase noise is -137.3 dBc/Hz at 3 MHz offset. The tuning range is found to be 300 MHz range from 2.3 GHz to 2.6 GHz.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2004.06a
• /
• pp.106-111
• /
• 2004

밀리미터파 대역(30∼300GHz)의 전파에 대한 관심이 증가하면서 NRD(Non Radiative Dielectric)에 대한 관심이 커지고 있다. NRD Guide 에서는 평행한 평판 전도체의 간격을 반 파장 이하로 좁게 함으로써 공기 영역에서는 차단 상태가 되고 유전체 내에서는 차단상태가 해소되어 밀리미터파의 신호가 방사되지 않고 전송 될 수 있는 특성을 가진다. 밀리미터 웨이브를 발진시키기 위해 밀리미터파 대역에서 쉽게 동작하고 비교적 손쉽게 구할 수 있는 Gunn 발진기의 발진소자인 Gunn Diode를 사용한다. 본 논문에서는 실험을 통해 스트립 금속 공진기로 공진 주파수를 미조정하여 비방사유전체선로를 통한 밀리미터파 대역의 주파수특성을 분석하고 이러한 특성을 이용하여 60GHz 대역 송신기의 발진회로 설계를 다루었다.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.364-369
• /
• 2012

This paper presents an experimental study on the radio propagation characteristics in subway tunnel at 18GHz frequency band which has been assigned to video transmission between train and wayside. The radio propagation tests are carried out in the subway tunnel of Seoul Metro using the antenna and communication devices of the prototype video transmission system. The measurement results show that 18GHz radio propagation in subway tunnel has smaller path loss than that of general outdoor radio environment. It is also cleared that the arch-type tunnels have smaller radio propagation losses than rectangular tunnels, and single track tunnels have smaller pass loss than double track tunnels. From the measurements, the radio propagation coverage is worked out as 520 meters. The curved tunnels which cannot have LOS communication between transmitter and receiver have large pass losses and fluctuation profile along distance. The radio propagation coverage along curved tunnels is worked out as 300 meters. These investigation results can be used to design the 18GHz radio transmission system for subway tunnel by providing the optimized wayside transmitter locations and handover algorithm customized to the radio propagation characteristics in subway tunnels.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.71-75
• /
• 2014

Ground state energy levels of the $Fe^{3+}$ paramagnetic impurity ion in stoichiometric $LiTaO_3$ and in congruent $LiTaO_3$ single crystals were calculated with electron paramagnetic resonance constants. Energy levels between six energy levels were obtained with spectroscopic splitting parameter g and zero field splitting constant D for $Fe^{3+}$ ion. The energy diagrams of $Fe^{3+}$ ion were different from different magnetic field directions ([100], [001], [111]) when magnetic field increases. The calculated ZFS energies of $Fe^{3+}$ ion in stoichiometric and congruent $LiTaO_3$ single crystals for ${\mid}{\pm}5/2$ > ${\leftrightarrow}{\mid}{\pm}3/2$ > and ${\mid}{\pm}3/2$ > ${\leftrightarrow}{\mid}{\pm}1/2$ > transitions were 12.300 GHz and 6.150 GHz, and 59.358 GHz and 29.679 GHz, respectively. It turns out that energy levels of $Fe^{3+}$ paramagnetic impurity in $LiTaO_3$ crystal are different from different crystal growing condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.290-298
• /
• 2018

Herein, an S-band internally-matched power amplifier that shows a power capability of 300 W in a Long Term Evolution(LTE) band 7 is designed and fabricated using a CGHV40320D GaN HEMT from Wolfspeed. Based on the nonlinear model, the optimum source and load impedance are extracted from the source-pull and load-pull simulations at the fundamental and harmonic frequencies, and the harmonic impedance tuning circuits are implemented inside a ceramic package. The internally matched power amplifier, which is fabricated using a thin-film substrate with a high relative permittivity of 40 and an RF35TC PCB substrate, is measured at the pulsed condition with a pulse period of 1 ms and a duty cycle of 10%. The measured results show a maximum output power of 257~323 W, a drain efficiency of 64~71%, and a power gain of 11.5~14.0 dB at 2.62~2.69 GHz. The LTE-based measurement shows a drain efficiency of 42~49% and an ACLR of less than -30 dBc(excluding 2.62 GHz) at an average power of 79 W.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.990-995
• /
• 2000

As the interest in the millimeter wave frequency (30 ~300 GHz) increases, Nonradiative Dielectric (NRD) guide is being more attractive due to its low loss characteristics. Most of millimeter wave components, which can be realized with waveguide, can also be realized with NRD guide since NRD guide has similar dispersion characteristics and field patterns to waveguide. Previously, Variational Method was applied to the gap discontinuity problem to design a gap-coupled NRD bandpass filter. In this paper, the design procedure was simplified by replacing the air gap region with an equivalent circuit model of an evanescent waveguide using the fact that the NRD guide has a similar structure with a dielectric-filled metal waveguide. Prior to applying this design method to the bandpass filter of millimeter wave frequency range, a bandpass filter of which center frequency is 10 GHz(3-Pole, 0.1 dB ripple, 2% fractional bandwidth) was designed and fabricated. The measured result agrees with one simulated with HFSS within an error range of a fabrication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.57-62
• /
• 2020

The millimeter wave that uses the spectrum in the 30GHz~300GHz band has a shorter wavelength due to its high carrier frequency, so it is suitable for Massive MIMO systems because more antennas can be equipped in the base station. However, since an RF chain is required per antenna, hardware cost and power consumption increase as the number of antennas increases. Therefore, in this paper, we investigate antenna selection schemes to solve this problem. In order to solve the problem of high computational complexity in the exhaustive search based antenna selection scheme, we propose a approach of applying deep learning technology. An best antenna combination is predicted using a DNN model capable of classifying multi-classes. By simulation tests, we compare and evaluate the existing antenna selection schemes and the proposed deep learning-based antenna selection scheme.