• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.551-560
• /
• 1988

Gas-particle two phase flow and heat transfer in a cavity receiving thermal radiation through selectively transparent walls have been analyzed by a finite difference method. Particles injected from the upper hole of the cavity are accelerated downward by gravity and exit through the lower hole while they absorb, emit and scatter the incident thermal radiation. Gas phase is heated through convection heat transfer from particles, and consequently buoyancy induced flow field is formed. Two-equation model with two-way coupling is adopted and interaction terms are treated as sources by PSI-Cell method. For the particulate phase, Lagrangian method is employed to describe velocities and temperatures of particles. As thermal radiation is incident upon horizontally, radiative heat transfer in the vertical direction is assumed negligible and two-flux model is used for the solution of radiative heat flus. Gas phase velocity and temperature distributions, and particle trajectories, velocities and temperatures are presented. The effects of particle inlet condition, particle size, injection velocity and particle mass rate are mainly investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.731-738
• /
• 2012

In this study, the evaluation of the aerodynamic characteristics of the NREL Phase VI Rotor System has been performed, for the 7 m/s upwind case using commercial FEA and CFD tools which are ANSYS Mechanical 12.1 and CFX 12.1. The initial operating conditions of the rotor blade include a $3^{\circ}$ tip pitch angle. A numerical simulation was carried out on only the rotor parts, excluding the tower structure based on the equivalent stiffness model, to consider the aeroelastic effect for the numerical simulation using the loosely coupled 2-way fluid-structure interaction method. The blade root bending moment was monitored in real time to obtain reasonable results. To verify the analysis results, the numerical simulation results were compared with the measurements in the form of the root bending moment and the pressure distributions of the NREL/NASA Ames wind tunnel test.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.115-118
• /
• 2011

Process characterization of the chemical mechanical polishing (CMP) process for undensified phosphosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been addressed to experimenters to understand the relationship between input variables and responses of interest in a simple and efficient way. It is typically beneficial for determining the adequate size of experiments with multiple process variables and making statistical inferences for the responses of interests. Equipment controllable parameters to operate the machine include the down force (DF) of the wafer carrier, pressure on the backside of the wafer, table and spindle speed (SS), slurry flow rate, and pad condition. None of them is independent; thus, the interaction between parameters also needs to be indicated to improve process characterization in CMP. In this paper, we have selected the five controllable equipment parameters, such as DF, back pressure (BP), table speed (TS), SS, and slurry flow (SF), most process engineers recommend to characterize the CMP process with respect to material removal rate (RR) and film uniformity as a percentage. The polished material is undensified PSG. PSG is widely used for the plananization in multi-layered metal interconnects. We identify the main effect of DF, BP, and TS on both RR and film uniformity, as expected, by the statistical modeling and analysis on the metrology data acquired from a series of $2^{5-1}$ fractional factorial design with two center points. This revealed the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that the process control based on better understanding of the process is the key to success in semiconductor manufacturing, typically when the wafer size reaches 300 mm and is continuously scheduled to expand up to 450 mm in or little after 2012.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.99-108
• /
• 2020

PURPOSE: This study examined the effects of the confusion level in performing dual tasks using smartphones while walking in subjects with chronic ankle instability (CAI). METHODS: Twenty subjects with CAI and 20 healthy subjects participated in the study. The spatial, temporal, spatial-temporal, and variability gait parameters were measured using GAITRite under four different conditions: general gait, web surfing during gait, texting during gait, and gaming during gait. Two-way repeated-measures analysis of variance was used to analyze the interaction according to the group (2) and confusion level in dual-tasks (4). One-way repeated-measures analysis of variance was used to compare the changes within the group according to the confusion level in dual-tasks. The changes between groups were compared using an independent t-test. The statistical significance level was set to p = .05. RESULTS: Significant interactions in the temporal and spatial-temporal gait parameters were found between the dual-task conditions and the other groups (p < .05). Significant within-group differences in the spatial, temporal, and spatial-temporal gait parameters were found according to the confusion level in dual tasks (p < .05). Significant between-group differences were observed in the temporal and spatial-temporal gait parameters according to the confusion level in dual tasks (p < .05). CONCLUSION: The effect of the confusion level in dual tasks was greater in subjects with CAI than in healthy individuals. This study suggests that to prevent reinjury to the ankle, subjects with CAI should avoid dual tasks such as using smartphones while walking.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.1
• /
• pp.51-62
• /
• 2014

Purpose : The purpose of this work was to ascertain the effects of cervical traction on the pain, the range of motion and the quality of sleep of the older women with the tension headache. Method : 25 subjects between ages 66 and 82 who agreed on this experiment and diagnosed with tension headache participated in this study. All subjects were treated with air-pressure cervical traction while 20 minutes a day, 3 times per week, for 4 weeks. The effects of air-pressure cervical traction were evaluated by PSQI(Pittsburgh sleep quality index), a pain last a day, VAS, and four ROMs. In order to investigate the effect of age on the treatment, subjects were divided into two groups, of less and of over than age 75. The measured data were analyzed by using one-way repeated ANOVA and two-way repeated ANOVA. Result : 1) The group of less than age 75 showed the significant improvements in all measurement variables, PSQI, a pain last a day, VAS and four ROMs. 2) The group of over than age 75 showed the significant improvements in all measurement variables excluding the flexion ROM of cervical. 3) No significant differences between two groups were showed in all measurement variables, but the interaction effect between group and period was significant in only VAS. Conclusion : From the results of this study, a cervical traction intervention using an air-pressure cervical traction proved to be effective on the reduction of tension headache and the improvement of the quality of sleep.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.789-796
• /
• 2019

The purpose of this study was to compare kinematic variables between elite golfer and novice during golf putting. 23 elite golfers and 19 novice were participated, and SAM Putt was used to collect kinematic variables. To identify main effect and interaction effect, it was performed Two-way Mixed ANOVA at a significant level of a .05. Elite and novice group, follow-through was significantly different and indicated main effect between distance and skill level. Impact, backswing, and loft angle were significantly different and showed main effect between skill level. Also, backswing rhythm and impact timing were significantly different and indicated main effect between skill level. Therefore, minimizing the movement of the wrist and keeping the putting strike rhythm may improve the putting ability.

• Physical Therapy Korea
• /
• v.30 no.3
• /
• pp.184-193
• /
• 2023

Background: Studies investigating the immediate effects of a single intervention to correct forward head posture are rare. Objects: This study aimed to compare the changes in treatment effects in patients with forward head posture and neck pain after manual and self-exercise therapy over a 1-hour period. Methods: Twenty-eight participants were randomly divided into manual and self-exercise therapy groups. Following the initial evaluation, manual or self-exercise therapy was applied to each group for 30 minutes each in the prone, supine, and sitting positions. The variables measured were the craniovertebral angle (CVA), stress level, pain level, and sternocleidomastoid (SCM) stiffness. After the intervention, re-evaluation was conducted immediately, 30 minutes later, and 1 hour later. Two-way analysis of variance (ANOVA) was used to compare the maintenance of treatment effects between the two groups. Results: Based on the two-way mixed ANOVA variance, there was no interaction between the groups and time for all variables, and no main effects were found between the groups. However, a significant effect of time was observed (p < 0.05). Post hoc tests using Bonferroni's correction revealed that in both groups, the CVA, pain, and stress showed significant improvements immediately after the intervention compared with before the intervention, and these treatment effects were maintained for up to 1 hour after the treatment (p < 0.0083) in the manual therapy group. However, the stress level was maintained until 30 minutes later (p < 0.0083) in the self-exercise group. There was no significant decrease in right SCM stiffness before and after the intervention; however, left SCM stiffness significantly decreased after the self-exercise intervention (p < 0.0083). Conclusion: Both manual and self-exercise therapy for 30 minutes were effective in reducing forward head posture related to the CVA, pain, and stress levels. These effects persisted for at least 30 minutes.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.107-123
• /
• 2022

The purpose of this study is to investigate the effects of learning using computer-based science inquiry program. To this end, the three lessons computer-based science inquiry were developed in domain of material's properties. The developed program was put into K middle school located in Seoul and the effects were verified. For the experimental group, the three lessons computer-based science inquiry related to the separation of mixture were introduced, and for the comparison group, the contents presented in the textbook were introduced as a teacher-centered teaching method. To verify the effects of the program, 2-way ANCOVA was performed on positive experiences about science and science core competency, and 2-way ANOVA was performed on academic achievement. As a result of the study, there were significant differences between the two groups in positive experiernces about science and scientific core competencies and academic achievement (p<.05), and group^*gender interaction effect was only significant in academic achievement (p<.05). From the results of this study, we could see the possibility of using a computer-based science inquiry program as a chemistry teaching method that enables sustainable scientific inquiry.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.221-233
• /
• 2019

In Korea, small and medium sized domestic enterprises(SMEs) play an pivotal role in the national economy, accounting for 99.9% of all enterprises, 87.9% of total employment, and 48.3% of production. and SMEs was driving a real force of the development of national economy in many respects such as innovation, job creation, industrial diversity, balanced regional development. Despite their crucial role in the national development, most of SMEs suffer from a lack of R&D capabilities and equipments as well as funding capacity. Public R&D institutes can provide SMEs with valuable supplementary technological knowledge and help them build technological capacity. so, In order to effectively support SMEs, government and public R&D institutes must be a priority to know about the factors influencing the performance related to technology transfer and technological collaborations. In particular, SMEs are not only taking up a large portion of the national economy, but also their influence in politics and economy so strong that raising the competitiveness of small and medium-sized companies is a national policy goal that must be achieved in order to achieve sustained economic growth. For this reason, it is necessary to look specifically at the relationship between concepts such as the environment, strategy, and organizational culture surrounding the enterprise to enhance the competitiveness of SMEs. The paper analyzes 665 companies to find out which organizational culture affects their performance by classification and type of business of SMEs. This study demonstrated that when SMEs seek consistency in their external environment, strategies, and organizational structure to maintain their continued competitiveness. According to three-way analysis of variance (3-way ANOVA) indicates that classification of industries in SMEs has statistically significant main effects, but the type of business and organizational culture do not have significant effects. However, the company's organizational performance (operating profit) of SMES were found to differ significantly in comparison between groups according to classification standards of industries, and therefore adopted some parts. In addition, an analysis of the effect of interaction between the three independent variables of small and medium-sized enterprises has shown that there are statistically significant interaction effects among classification, types of business, and organizational cultures. The results shows that there is an organizational culture suitable for each industry classification and type of business of an entity, and is expected to be used as a basis for establishing promotion policies related to the incubation and commerciality of small and medium-sized venture companies in the future.

• Physical Therapy Korea
• /
• v.19 no.4
• /
• pp.38-45
• /
• 2012

The aim of this study is to compare the effect of abdominal drawing-in maneuver (ADIM) on lower trapezius (LT), serratus anterior (SA), and erector spinae (ES) muscle activity during arm lifts in prone and standing positions. Twenty healthy subjects were recruited, and NoraxonTeleMyo 2400T was used to collect electromyographic signals from the LT, SA, and ES muscles. A two-way repeated analysis of variance (ANOVA) used a significance level of .05. If a significant interaction was found, pairwise comparisons were performed with a Bonferroni adjustment (.05/4=.013). The results of the study were as follows: 1) In LT, no significant ADIM by position interaction was found ($F_{1,19}$=.356, p=.558). There was a significant main effect for ADIM. LT muscle activity with ADIM was significantly greater compared with muscle activity without ADIM ($F_{1,19}$=82.863, p<.001). There was also a significant main effect for position. LT muscle activity in the prone position was greater compared with muscle activity in the standing position ($F_{1,19}$=116.401, p<.001). 2) In SA, significant ADIM by position interaction was found ($F_{1,19}$=8.687, p=.008). There were significant differences in all pairwise comparisons. The greatest SA muscle activity was observed in the standing position with ADIM. 3) In ES, significant ADIM by position interaction was found ($F_{1,19}$=122.473, p<.001). The lowest ES muscle activity was elicited in the standing position with ADIM. Based on these results, ADIM is advocated in the prone position to increase LT muscle activity. In addition, it is concluded that arm lifts in the standing position with ADIM offer the most favorable combination for reducing ES muscle activity and increasing SA muscle activity.