• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.289-294
• /
• 2002

The broadband high power 3-way combiner was designed and fabricated for the digital TV repeater. To achieve increase of the bandwidth and the high power capability, Wilkinson type power divider was adopted in our research. First of all, Wilkinson type power divider of equal-split and unequal-split were combined, and the characteristics of the four port in-phase power combiner was simulated for each thickness of dielectric substrates. As the results of simulation, the power combiner fabricated by using dielectric substrate of 120 mil-thickness has the characteristics as follows: insertion loss of less than -651 dB, reflection coefficient of less than -13 dB, isolation among the output ports of less than -15 dB, and pose difference among the output ports of smiler than 13$^{\circ}$. Therefore, this power combiner was possible to improve the limit of microstrip line width due to high impedance, the problem of power loss due to interaction between strip lines in a high power combiner and narrow bandwidth simultaneously. Furthermore, making broadband and high power could be achieved since the fabricated 3-way combiner has good characteristics of insertion loss, the reflection coefficient, separation between ports, and phase difference.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.9
• /
• pp.1270-1277
• /
• 2017

Objective: The present study aimed to determine the impact of ewe body condition score (BCS) (over a range of 2.0 to 3.0) and nutritional treatments (consisting of differing herbage masses) during very late pregnancy and lactation and their potential interaction on the performance of twin-bearing ewes and their lambs to weaning. Methods: On day 142 of pregnancy, twin-bearing ewes with a BCS of 2.0, 2.5, or 3.0 were allocated to a "Moderate' or 'Unrestricted' nutritional treatment until day 95 of lactation (weaning). The nutritional treatments aimed to achieve average herbage masses of 1,200 to 1,300 kg dry matter (DM)/ha (Moderate) and 1,500 to 1,800 kg DM/ha (Unrestricted). Results: There were no three-way interactions between ewe BCS group, nutritional treatment and time for any ewe or lamb parameter. The nutritional treatments had no effect (p>0.05) on lamb birth or weaning weight. Lambs born to Moderate ewes had greater survival and total litter weight at weaning (p<0.05). Regardless of BCS group, Unrestricted treatment ewes had greater body condition and back-fat depth at weaning than Moderate treatment ewes (p<0.05). Ewes of BCS 2.0 group reared lighter lambs to weaning (p<0.05) and tended to have a lower total litter weight (p = 0.06) than BCS 3.0 group ewes. Conclusion: This study suggests farmers should aim to have all ewes with a BCS of 2.5 or 3 in late pregnancy for optimal lamb weaning performance. Furthermore, there is no benefit to lamb production of offering ewes pasture masses >1,200 kg DM/ha during very late pregnancy and lactation.

• Journal of Korean Medical classics
• /
• v.3
• /
• pp.1-150
• /
• 1989

Oriental medicine thinks life and death as the following. 1. The universe seems to be a kind of organism which is divided into 3 branches, as Heaven, Earth and Man. Man is not created from nihil by the Creator. Heaven and Earth by their interaction operate to produce man. This is similiar that zygote is not created from nihil, and that sperm and ovum are transformed into zygote by their interaction. The symbolic meaning of sperm is Heaven, and that of ovum is Earth. Mind and body, as well as spirit and body, are not the real, but artificial words for the purpose of observing and expressing one man. So there is not spiritual substance as distinct from body. The expected life span of man is subjected to change, and is always becoming through life. Fate, the Creator and the world to come cannot be said to be. 2. After one's death, man is transformend into Heaven and Earth. Dying is this process of transformation. Although man comes into existence and closes one's life, the total life of the universe does not change. The criteria of determination of death is not in cell death, but in somatic death. Somatic death divided into 2 branches, one is heart-lung death, the other is brain death. For the standard of health changes ceaselessly as time goes by, aging and dying is not the process of losing health. Because of mind cannot be seperated from body, we'll feel at ease bodily and mentally in healthy dying. The completion of lifetimes is the value of healthy dying. 3. From the viewpoint of these, we must think to let a person die healthily is the right medical ethics. The way to let a person die healthily is divided into 3 branches, one is treatment, another is prevention and the other is promotion of health. We should treat and prevent death of sickness, but take care of healthy dying.

• Journal of Surface Science and Engineering
• /
• v.23 no.2
• /
• pp.30-38
• /
• 1990

For the purpose of suggesting the thermal resistant catalyst for automobile emission control, various catalysts, Pd-WO3 and PD-La2O3 systems, were charactrized before and after thermal aging. It was found that La2O3 formed amorphous surface compound on the support by strong metal-support interaction(SMSI). And by Temperature Programmed Desorption (TPD) expeiment, it was found that the distribution of acid site which is strong acid sites by adding the promoters. After thermal aging, it was observed that the acidity of Pd-WO3 system was decreased largely because of losing acid site by metal vaporization. On the other hand, there was pretty small change in the properties of matter of Pd-La2O3 system. Therefore, it could be considered that La2O3 formed heat resisting amorphous surface compound on the support by SMSI.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.2
• /
• pp.195-201
• /
• 2013

A lab-scale ensiling study was carried out to investigate the fermentation quality of water hyacinth (WH) supplemented with molasses, rice bran, as an absorbent, and an inoculant in the form of fermented vegetable juice and their combinations. After wilting the water hyacinths for 7 h to a dry matter (DM) content of 240 to 250 g/kg, the following treatments were applied: i) Control (C), WH only; ii) WH with sugarcane molasses at 40 g/kg WH (CM); iii) WH inoculated with fermented vegetable juice at 10 ml/kg WH (CI); iv) CM and CI (CMI) combined; v) WH with 150 g rice bran/kg WH (CA); vi) CA and CI combined (CAI); vii) CA and CM combined (CAM); and viii) CA, CM and CI combined (CAMI). After application of additives, the differently treated forages were mixed and ensiled in triplicates in 1,500-ml polyethylene jars. After ensiling for 3 d, pH values in all treatments, except C and CI, had decreased to approximately 4.0 and remained low till 14 d. After 56 d, pH had increased between 0.4 to 0.9 pH-units compared to those at 14 d. The ammonia nitrogen ($NH_3$-N) concentration ranged from an acceptable level in treatment CM (8 g/kg N) to a high $NH_3$-N value in treatment CMI (16 g/kg N). Lactic acid formation was higher in CI than in all other treatments. Butyric acid contents, which indicate badly fermented silages, were low in all silages (<2 g/kg DM). There were two-way interactions (p-values from <0.001 to 0.045) for almost all fermentation end-products and pH, except for the molasses${\times}$inoculant interaction on $NH_3$-N (p = 0.26). Significant 3-way interactions were found on all observed variables except for weight losses of silages. It is concluded that conserving wilted WH as silage for ruminants may be improved by the addition of molasses or rice bran.

• Journal of Digestive Cancer Research
• /
• v.6 no.1
• /
• pp.6-10
• /
• 2018

The importance of signal transducer and activator of transcription 3 (STAT3) signaling in gastric carcinogenesis was firmly evaluated in the previous studies. Fully activated STAT3 induces various target genes involving tumor invasion and epithelial-mesenchymal transition (EMT), and mediates interaction between cancer cells and microenvironmental immune cells. Thus, suppression of STAT3 activity is an important issue for inhibition of gastric carcinogenesis and invasion. Unfortunately, data from clinical studies of direct inhibitor targeting STAT3 have been disappointing. SH2-containing protein tyrosine phosphatase 1 (SHP-1) effectively dephosphorylates and inhibits STAT3 activity, which has not been extensively studied gastric cancer research field. However, by summarizing recent data, it is evident that protein and gene expression of SHP-1 are minimal in gastric cancer cells, and induction of SHP-1 effectively downregulates phosphorylated STAT3 and inhibits cellular invasion in gastric cancer cells. Several SHP-1 inducers have been investigated in the experimental studies, including proton pump inhibitor, arsenic trioxide, and other natural compounds. Taken together, we suggest that modulation of SHP-1/STAT3 signaling axis may present a new way for treatment of gastric cancer, and development of effective SHP-1 inducer may be an important task in the future search field of gastric cancer.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.4
• /
• pp.929-938
• /
• 2024

This study examined the effects of a 12-week combined exercise program on blood lipids, albumin, and free fatty acid (FFA) levels in obese, middle-aged women, aged 55-64, who were within five years post-menopause. The participants were divided into two groups: a moderate-intensity exercise group (MIG, n=10) and a high-intensity exercise group (HIG, n=10). Both groups performed resistance exercises using elastic bands and aerobic walking on treadmills three times a week for 60 minutes per session. Data analysis involved calculating the mean (M) and standard deviation (SD) for each measurement item. A two-way repeated measures ANOVA was used to assess interaction effects between groups and periods. Paired t-tests were conducted to evaluate within-group differences over time, and independent t-tests were used to compare between-group differences. The statistical significance level was set at .05 for all analyses. Results showed a significant interaction effect for triglycerides (TG) among the blood lipids (p<.05). No statistically significant difference was found in albumin levels. FFA levels significantly decreased in both groups due to the interaction effect (p<.05), with a more pronounced decrease in the MIG group. These findings indicate that regular exercise is effective in improving and preventing obesity in post-menopausal, obese middle-aged women. Notably, moderate-intensity exercise had a more substantial impact on TG and FFA levels compared to high-intensity exercise. Therefore, continuous moderate-intensity exercise is recommended to improve obesity and promote a healthy lifestyle before transitioning into old age.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.69-85
• /
• 2014

The purpose of this study is to find the effects of triple helix model on the firm innovation, especially focused on the moderating effects of trust in Daegu Gyeongbuk. There are two ways of triple helix interactions in Korea. One is a traditional triple helix interaction in which entrepreneurial universities have a central role. As the other way, such 3rd-sector type organizations as technoparks have a important role in facilitating the triple helix interactions. We collected data from 231 firms located in the Daegu-Gyeongbuk region. According to the findings, firstly, 3rd-sector type organizations such as technoparks have a positive(+) effect on the firm innovation. But a traditional triple helix interaction has not. Secondly, a 3rd-sector type support has much more positive(+) effects on the firm innovation than a traditional triple helix interaction. Thirdly, the trust has a positive(+) moderating effect on the firm innovation in the two-type of the triple helix interactions. In the conclusion, research implication, limitation of this study, and future directions are suggested.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.97-106
• /
• 2007

This study examines whether the reinforcement theory could be effectively applied to teaching assistant robots between a robot and a student in the same way as it is applied to teaching methods between a teacher and a student. Participants interacted with a teaching assistant robot in a 3 (types of robots: positive reinforcement vs. negative reinforcement vs. both reinforcements) by 2 (types of participants: honor students vs. backward students), within-subject experiment. Three different types of robots, such as 'Ching-chan-ee' which gives 'positive reinforcement', 'Um-bul-ee' which gives 'negative reinforcement', and 'Sang-bul-ee' which gives both 'positive and negative reinforcement' were designed based on the reinforcement theory and the token reinforcement system. Subjective impressions and preferences were measured according to the types of robots and the types of participants. Participants preferred the positive reinforcement robot most, and the negative reinforcement robot least. Regarding the number of stimulus, in case of the negative reinforcement robot for honor students, the less the stimulus is, the more positive the impressions toward the robot are. The findings demonstrate that the reinforcement interaction is important and effective factor which determines children's preferences and impressions for teaching assistant robots. The results of this study can be implicated as an effective guideline to interaction design of teaching assistant robots.