• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.276-279
• /
• 1996

This paper deals with the method providing an exact solution to the 3-dimensional guillotine cutting stock problem. We suggest a 3-stage sutting method using the property that cubic material has to be cut into 2-dimensional planes firstly. This method requires more stocks that the general guillotine cutting methods but can save work force. By using the 1-dimensional dynamic programming, we reduce the computational time and the memory requirement in the 3-stage guillotine cutting method.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.233-240
• /
• 2003

Recently, the world are preparing for new revolution, called as If (Information Technology), NT (Nano-Technology), and BT (Bio-Technology). NT can be applied to various fields such as semiconductor-micro technology. Ultra precision processing is required for NT in the field of mechanical engineering. Recently, together with radical advancement of electronic and photonics industry, necessity of ultra precision processing is on the increase for the manufacture of various kernel parts. Therefore, in this paper, stability of ultra precision cutting unit is investigated, this unit is the kernel unit in ultra precision processing machine. According to alteration of shape and material about hinge, stability investigation is performed. In this paper, hinge shapes of micro stage in UPCU(Ultra Precision Cutting Unit) are designed as two types, where, hinge shapes are composed of round and rectangularity. Elasticity and strength are analyzed about micro stage, according to hinge shapes, by FE analysis. Micro stage in ultra precision processing machine has to keep hinge shape under cutting condition with 3-component force (cutting component, axial component, radial component) and to reduce modification against cutting force. Then we investigated its elasticity and its strength against these conditions. Material of micro stage is generally used to duralumin with small thermal deformation. But, stability of micro stage is investigated, according to elasticity and strength due to various materials, by FE analysis. Where, Used materials are composed of aluminum of low strength and cooper of medium strength and spring steel of high strength. Through this stability investigation, trial and error is reduced in design and manufacture, at the same time, we are accumulated foundation data for unit control.

• 한국초지조사료학회지
• /
• 제12권2호
• /
• pp.89-97
• /
• 1992

This experiment was attempted to investigate the effects of growing stage, cutting frequency and the level of nitrogen fertilization on the change of carbohydrate reserves in reed canarygrass(Pha1aris arundinacea L.). The results obtained were as follows: The amount of carbohydrate reserves appeared to markedly decrease up to critical level after the cutting in hot and dry weather season. During the growing stage, the amount of carbohydrate reserves decreased just after the cutting and also during the period of flourishing elongation of reed canarygrass. However, it began to increase sharply from the end of September for wintering. Two cutting system showed the highest mean value(19.53 %) of carbohydrate reserves and those of three, five and four cutting system was 15.32 %. 14.73 %, and 14.60 % respectively. Reed canarygrass with no nitrogen fertilization resulted in 17.17% of carbohydrate reserve, however there was no singificant difference among various levels of nitrogen fertilization. In respect of regrowth. 3 cutting system showed the most effective cutting frequency, however 4 or 5 cutting system had a decreasing tendency of regrowth.

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.110-116
• /
• 1988

1. 분얼수는 3차 예취기에서가장 많았으며, 이시기까지 계속 증가를 하였지만 가을 예취기에서 급격히 감소했다. 엽면적 지수는 3차 예취기에서 가장 높았으며, 보통 예취직후 서서히 증가를 하다가 15~20일부터 빠르게 증가하였다. 2. 各 예취기 건물수량은 1次와 3次 ~예취가 다른 時期에 比하여 높게 나타났으며, 예취기별 건물중 變化는 葉面積 指數의 變化와 비슷한 樣相을 보이고 있었다. 3. LER은 예취후 20-30일l, SLW는 25-30日, CGR은 25~25日 사이에 最大速度에 도달했다. CGR은 1次 빛 3次 예취기에서 비교적 높았다. NAR은 約 20일 정도에 최대에 도달했는데, 棄乾物 重에는 NAR보다 다른 生長指標들이 더욱 크게 作用함을 알 수 있었다. 4. 乾物收量과 가장 높은 相關은 LAI와 CGR 으로서 각각 0.905와 0.962를 보여 고도의 正의 相關을 나타내였고 LER과 LAI 間에도 正의 相關인정되었다. 收量의 추정에 최적식은 LAI와 CGR을 변수로 사용하여 얻어 졌다. 5. LAI와 CGR 및 收量과의 관계로서 결정한 예취의 適期는 各 예취기별로 다르게 나타났으나 32일에서 36일 사이에 존재하였다.

• 한국초지조사료학회지
• /
• 제8권2호
• /
• pp.110-116
• /
• 1988

1. 분얼수는 3차 예취기에서가장 많았으며, 이시기까지 계속 증가를 하였지만 가을 예취기에서 급격히 감소했다. 엽면적 지수는 3차 예취기에서 가장 높았으며, 보통 예취직후 서서히 증가를 하다가 15~20일부터 빠르게 증가하였다. 2. 各 예취기 건물수량은 1次와 3次 ~예취가 다른 時期에 比하여 높게 나타났으며, 예취기별 건물중 變化는 葉面積 指數의 變化와 비슷한 樣相을 보이고 있었다. 3. LER은 예취후 20-30일l, SLW는 25-30日, CGR은 25~25日 사이에 最大速度에 도달했다. CGR은 1次 빛 3次 예취기에서 비교적 높았다. NAR은 約 20일 정도에 최대에 도달했는데, 棄乾物 重에는 NAR보다 다른 生長指標들이 더욱 크게 作用함을 알 수 있었다. 4. 乾物收量과 가장 높은 相關은 LAI와 CGR 으로서 각각 0.905와 0.962를 보여 고도의 正의 相關을 나타내였고 LER과 LAI 間에도 正의 相關인정되었다. 收量의 추정에 최적식은 LAI와 CGR을 변수로 사용하여 얻어 졌다. 5. LAI와 CGR 및 收量과의 관계로서 결정한 예취의 適期는 各 예취기별로 다르게 나타났으나 32일에서 36일 사이에 존재하였다.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.140-144
• /
• 2000

Laser cutting of thick diamond films is studied using a low-power(10 W) copper vapor laser. Due to the existence of the saturation depth in laser cutting, thick diamond films are not easily cut by low-power lasers. In this study, we have adopted a low thermalconductivity underlayer of alumina and a heating stage (up to 500$^{\circ}C$ in air) to prevent the laser energy from consuming-out and, in turn, enhance the cutting efficiency. Aspect ratio increases twice fromm 3.5 to 7 when the alumina underlayer used. Adopting a heating stage also increases aspect ratio and more than 10 is obtained at higher temperatures than 400$^{\circ}C$. These results show that thick diamond films can be cut, with low-power lasers, simply by modifying the thermal property of underlayer.

• 한국초지조사료학회지
• /
• 제11권2호
• /
• pp.90-96
• /
• 1991

This experiment was carried out in order to estimate the recovery days of root and stubble to the days after cutting, and contribution of specific stubble weight on the regrowth was examined using the relationships between the dry weight of shoot and yield components, and regrowth parameters by the days after cutting. The varieties examined were Maprima, Manhattan, Tove, Peramo, Caliente, Tempo and P-2 grown under individual plant basis. The results are may be summarized as follows: 1. Dry weight of root and stubble were recovered up to 13.5 and 11 days after cutting, respectively. 2. Dry weight of shoot(regrowth parts+stubble) was affected significantly by the varieties, stages of regrowth and variety x stage of regrowth. 3. The variety with tiller weight type showed higher average productivity of shoot than those of the variety with tiller number type. 4. Absolute growth rate(AGR) of shoot was correlated significantly with regrowth parts, stubble, root and weight of a tiller at the early stage of regrowth(up to 12 days after cutting), and correlated with regrowth parts, stubble, weight of tiller and stubble area at the late stage of regrowth(up to 20 days after cutting). 5. Contribution of specific stubble weight to absolute growth rate of shoot was different between the stages of regrowth. Thus, regrowth parts per specific stubble weight(RP1SSbW) and weight of tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the early stage of regrowth, and efficiency of specific stubble weight(ESSbW), regrowth parts per specific stubble weight (RPISSbW) and weight of a tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the late stage of regrowth. 6. Regrowth utilization rate(RUR) was one of the useful regrowth parameter to indicate the regrowth potential of grasses.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.31-36
• /
• 2009

In this paper, the laser cutting characteristics of the flexible PCB using high power Nd:YAG UV laser were investigated. A specific FPCB model was selected for the experiment. Test sheets were made, which had equal materials and layer structure to those of the outline (OL) region and the contact pad (CP) region in the FPCB. The experiment is made up of two stages. In the first stage of the experiment, the laser cutting fluence was found, which is the threshold fluence to cut the test sheets completely. The laser cutting fluence of the OL sheet is $1781.26{\sim}1970.16\;J/cm^2$ and that of the CP sheet is $2109.34{\sim}2134.34\;J/cm^2$. In the second stage, cutting performance and its qualities were analyzed by the experiment. The laser cutting performance remained almost unchanged for all laser and process parameter sets. The average cutting width (top side/bottom side) of the OL sheet was $40.45\;{\mu}m/11.52\;{\mu}m$ and that of the CP sheet was $22.14\;{\mu}m/10.93\;{\mu}m$. However, the laser cutting qualities were different according to the parameters. The adjacent region of the cutting line on the OL sheet was carbonized as the beam speed was low and the overlap coefficient was high. The surface quality around the cutting line of the CP sheet was about the same. Carbonization and debris occurred on the surface of the cutting line. As a result of the experiment, the cutting qualities were better as the overlap coefficient was made low and beam speed high. Therefore, the overlap coefficient 2 or 3 is proper for the FPCB laser cutting.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.52-57
• /
• 2003

In this paper, stability of ultra precision cutting unit is analyzed and this unit is the kernel unit in ultra precision processing machine. According to alteration of shape and material about hinge, stability investigation is performed Through this stability investigation, trial and error is reduced in design and manufacture, at the same time, we are accumulated foundation data for unit control.

• 한국초지조사료학회지
• /
• 제25권1호
• /
• pp.7-16
• /
• 2005

This experiments were carried out to determine growth characteristics, dry matter yield and voluntary intake of silage according to growth stage of Sorghum$\times$sudangrass(SSH) hybrid in mono-cropping and inter-cropping(C; com, T1; cutting of SSH at milk stage. T2; cutting of SSH at dough stage, T3; cutting of SSH at yellow ripe stage, T4; cutting of SSH and soybean at milk stage, T5; cutting of SSH and soybean at dough stage, T6: cutting of SSH and soybean at yellow ripe stage). Results obtained from these experiments are as follows; Plant length and leaf length of SSH(T2, T3, T4. T5 and T6)) were higher than C. T1 treatment was lower than it. C showed $2.3\~2.9$ times higher stem diameter as 29.5mm compare to SSH(T1, T2, T3, T4, T5 and T6). soybean(T4, T5 and T6) was lower in $4.3\~5.4$ times. But SSH of inter-cropping treatment(T4, T5 and T6) showed highly comparing with mono-cropping(T1, T2 and T3) at the same maturity. Leaf rate and stem hardness of SSH(T1, T2, T3, T4, T5 and T6) were lower than C. The fresh yield was high line with T2(72,320kg/ha), T1(69,103kg/ha), T3(68,333kg/ha) and C(57,988kg/ha), dry matter yield was high in line with T3(22.413kg/ha), T2(21,479kg/ha), C(19,252kg/ha) and T6(18,175kg/ha), (P<0.05). Protein dry matter yield was higher in T3(1,434kg/ha), C(1,386kg/ha)T5 and T6(1,345kg/ha) it was lower in T1(872kg/ha), (P<0.05). Crude protein of silage of T4 and T5 was higher than C, T2 and T3 were lower than it(P<0.05), while NDF content was not different. ADF content of T6 was higher than those of the other treatment. The highest hemi-cellulose among treatments was shown in T1 whereas T6 showed the lowest. Fresh intake of silge was 160.4, 155.8, 168.7, 172.9, 132.9, 158.7 and 185.2 g/BW for C, T1, T2, T3, T4, T5 and T6, respectively. Dry matter intake was high in line with T6(60.3g), C(153.8g), T3(53.6g), T5(47.8g), T2(46.8g), T4(35.2g) and T1(34.48g/BW), (P<0.05). Crude protein intake was high in line with T6(3.9g), T5(3.4g), C(3.4g), T2(2.9g), T3(2.9g), T4(2.6g) and T1(2.3g/BW), (P<0.05). As mentioned above the results, mono-cropping(T3) and inter-cropping(T5 and T6) could be recommended as increasing method of sorghum $\times$ sudangrass hybrid silage utilization when silage intake of dry matter and crude protein were considered.