• 디지털융복합연구
• /
• 제19권2호
• /
• pp.439-446
• /
• 2021

본 연구는 천연광물질로 나염 처리된 스포츠마스크가 방역마스크와 면마스크와 비교하여 주관적인 구취관련특성과 심리적 특성에서 차이가 있는 지 조사하는 것이다. 연구대상자는 스포츠마스크 군(Sports Mask Group) 30명, 방역마스크 군(KF Mask Group, KMG) 30명과 면 마스크 군(cotton mask group, CMG) 30명으로 나누어 총 90명의 대상자가 연구에 참가하였으며, 하루 1개, 3일 간 3개의 마스크를 사용하게 하였다. 또한 연구 기간은 2020년 10월 15일부터 2020년 10월 30일까지 실시하였다. 연구결과 구취건강과 구강건조 항목에서는 3군 간 차이가 없는 것으로 나타났지만 구강호흡과 구취자각도에서는 스포츠 마스크가 다른 마스크에 비하여 우수하게 나타났다. 심리적 요인을 분석한 결과 우울증은 3군 간 차이가 없는 것으로 나타났지만, 스트레스 요인에서는 스포츠마스크가 다른 마스크보다 스트레스지수가 감소된 것으로 나타났다. 연구의 결과는 기능성 마스크의 활용 방향성을 제시한 것으로써 가치가 있으며, 향후 연구될 기능성 마스크 연구의 기초 자료로 활용되길 바라는 바이다.

• 대한통합의학회지
• /
• 제7권3호
• /
• pp.85-94
• /
• 2019

Purpose: The purpose of this study was to observe the degree of mask contamination in dental hygienist for general and oral bacteria and to identify areas of mask contamination after treatment. Methods: Masks were collected with every fifty dental hygienists who currently working in the department of preventive dentistry, prosthodontics, and orthodontics in Busan. The mask bacteria were collected in specific upper and side parts of the mask. Hand germs were collected using sterile cotton swabs, and then placed in a sterile conical tube. These were transferred to the laboratory. Hand germs and mask bacteria were incubated with nutrient broth (NB) and brain heart infusion broth (BHI) for 24 hrs and each cultured with NB and BHI plate at $37^{\circ}C$ for 48 hrs. Collected data were analyzed using the SPSS Window 20. Results: The number of bacteria was observed in the order of the department of preventive dentistry ($10.1{\times}10^5CFU/ml$), prosthodontics ($14.7{\times}10^5CFU/ml$), and orthodontics ($23.3{\times}10^5CFU/ml$) in the hand. In general bacteria, the difference of contamination was seen by the parts of the mask, but there was no significant difference. However, the oral bacteria were observed highly contaminated upper part of the mask in preventive dentistry. The mask contamination according to the medical departments was observed. Especially, the contamination of mask in preventive dentistry was significantly higher than other departments in oral bacteria. Conclusion: This study suggested that correct mask replacement and recognition of contamination areas can contribute to the prevention of infectious disease. and it would be necessary to increase hand hygiene performance to prevent cross-infection with masks. Also, this study may give an idea for making guidelines for mask management and supporting to establish clear criteria for the education program of personal protective equipment.

• 대한의용생체공학회:의공학회지
• /
• 제43권3호
• /
• pp.131-135
• /
• 2022

Due to COVID-19, Correct method of wearing mask is important to prevent COVID-19 and the other respiratory tract infections. And the deep learning technology in the image processing has been developed. The purpose of this study is to create the type of mask wearing dataset for deep learning models and select the deep learning model to detect the wearing mask correctly. The Image dataset is the 2,296 images acquired using a web crawler. Deep learning classification models provided by tensorflow are used to validate the dataset. And Object detection deep learning model YOLOs are used to select the detection deep learning model to detect the wearing mask correctly. In this process, this paper proposes to validate the type of mask wearing datasets and YOLOv5 is the effective model to detect the type of mask wearing. The experimental results show that reliable dataset is acquired and the YOLOv5 model effectively recognize type of mask wearing.

• 한국정보전자통신기술학회논문지
• /
• 제15권4호
• /
• pp.243-248
• /
• 2022

본 논문은 SUS MASK을 FeCl3에 첨가제 (F300)를 첨가하여 에칭하는 것이 목적이다. 실험에 사용된 장비는 자체 제작된 자동 액 관리 시스템이다. 자동 액 관리 시스템은 비중(S.G)과 산화환원전위 (ORP)를 실시간으로 제어하고 FeCl3 및 첨가제를 정량 공급할 수 있는 장치이다. SUS MASK를 10장 단위로 200장까지 1분 동안 에칭하였다. 초기 SUS MASK가 10장 일 때 ORP 값이 628 mV로 시작하여 40장 투입할 때부터 611 mV로 측정되어 200장까지 610 mV에 가깝게 유지되는 것을 확인하였다. 또한 비중은 1.640 근처에서 유지되었다. 그리고 SUS MASK가 50장 이후부터 200장까지 0.4 mm에 근접하게 측정되었다. 실험은 ORP는 610 mV, 비중은 1.463, 에칭 압력은 3.0 kg/cm2, 첨가제 (F300) 비율은 1.2%로 하였고 한번 에칭할 때 10장씩 200장까지 하여 홀 크기를 측정하였다. 그 결과, 20장부터 직경이 0.4 mm에 근접하였다. SUS MASK 매수가 늘어나도 ORP 및 비중 조절이 잘 되었고 실험 목표치인 0.4 mm에 근접된 것을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제48권2호
• /
• pp.157-163
• /
• 2010

CRT 용 shadow mask의 생산속도 향상을 위해 첨가제를 투입한 염화제이철 수용액을 개발하였고 이를 shadow mask의 식각속도 향상에 적용하였다. $Fe(ClO_4)_3$ 첨가제를 종래의 식각용액인 염화제이철 수용액에 투입한 결과, shadow mask의 식각속도가 크게 향상되었으며, 이때 첨가제의 농도가 증가할수록 식각속도가 증가함을 알 수 있었다. 또한 첨가제가 투입된 식각용액으로 순수 니켈과 철-니켈 합금(Invar 강)의 식각속도를 비교한 결과, 대부분의 공정조건에서 둘 사이의 식각속도 차이가 작음을 알 수 있었고, 이는 첨가제의 투입에 따라 니켈과 철의 식각속도가 모두 향상된 결과로 해석되었다. 첨가제의 주입에 따라 식각속도가 증가하는 이유는, 첨가제 내의 음이온인 $ClO^{4-}$가 염화제이철 수용액 내의 $Cl^-$에 비해 전자를 이동하는 가교로서의 역할이 우수하여 전자를 더 빠르게 이동시킬 수 있기 때문인 것으로 추정된다.

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.438-443
• /
• 2021

Objective: The purpose of this study was to determine the effect of the difference in mask filters on the respiration rate of healthy people. Design: A randomized cross-over design. Methods: A total of 15 subjects were selected for this study (n=15). After filling out the Physical Activity Readiness Questionnaire, the selected participants abstained from caffeinated beverages and meals 30 minutes before and sat in a chair 10 minutes before stabilizing their breathing. Afterwards, the lung function test was performed 3 times for each mask, and the maximum value was used. The provided masks were Mask Free, Dental Mask, KF80, and KF94. Exhalation was measured for 6 seconds for each mask, and breathing was stabilized by repeating inhalation and exhalation until the next time. Results: In this study, the difference in respiratory function according to the mask type was statistically significant except for FEV1 and FVC (p<0.05). As a result of post-hoc analysis, FVC, FEV1, PEF, and FEF values were significantly lower than those of the control group not wearing a mask (p<0.05). When wearing KF94, FVC, FEV1, PEF25-25%, and FEF were significantly lower than when wearing a dental mask (p<0.05). When wearing a KF80 mask, it was significantly lower in FVC and FEV1 than when wearing a dental mask (p<0.05). In FEV1/FVC, the difference by mask type was not statistically significant (p<0.05), but it was lower than the spirometry standard of COPD patients (FEV1/FVC<0.7). Conclusions: As Now that wearing a mask is essential, it has been confirmed that the mask affects the respiratory rate.Therefore, in the case of healthy adults, it is recommended to rest after wearing a mask if attention deficit or headache occurs. People with low breathing capacity are recommended to have low-intensity activities and frequent rest periods after wearing a mask.

• 한국전자통신학회논문지
• /
• 제17권3호
• /
• pp.473-482
• /
• 2022

코로나 시대에서 감염의 위험을 줄이기 위하여 반드시 마스크를 착용하여야 하며, 건축 공사장과 같은 위험한 작업 환경에서 일하는 직원의 안전을 위하여 헬맷을 쓰는 것은 필수불가결하다. 본 논문에서는 헬멧과 마스크의 착용 여부를 분류하는 효과적인 딥러닝 모델 HelmetMask-Net를 제안한다. HelmetMask-Net은 CNN 기반으로 설계되며, 전처리, 컨벌류션 계층, 맥스풀링 계층과 4 가지 출력이 있는 완전결합 계층으로 구성되며, 헬멧, 마스크, 헬멧과 마스크, 헬멧과 마스크을 착용하지 않은 4 가지 경우를 구분한다. 정확도, 최적화, 초월 변수의 수를 고려한 실험으로 2 컨볼루션 계층과 AdaGrad 최적화를 가진 구조가 선정되었다. 모의 실험 결과 99%의 정확도를 보여 주었고, 기존의 모델에 비하여 성능이 우수함을 확인하였다. 제안된 분류기는 코비드 19 시대에 직원의 안전을 향상시킬 수 있을 것이다.

• 한국의류학회지
• /
• 제44권6호
• /
• pp.1163-1177
• /
• 2020

The purpose of this study is to figure out the information needed to improve the shape and size suitability of face-applied mask sheets. The study analyzed the shape of the mask sheet from the scanned images of 50 products of 37 domestic brands. In addition, each measurement of 42 mask sheets were compared and analyzed multilaterally with the 3D measurement dimensions of the faces of men and women in their 20s from the 6th SizeKorea data. Analysis on the shapes of mask sheets indicated that domestic commercial mask sheets are mainly made of single or dual sheets, with slits for enhancing fitness to the three-dimensional face. In the dimensional analysis of Korean men, women and mask sheets, most of the lengths of the mask sheets were significantly larger or smaller than the actual faces of men and women. The horizontal length and vertical length of the forehead above the eyes are significantly shorter, thereby requiring adjustments in the dimensions of this area. In order to improve the size suitability of the mask, it is necessary to adjust the dimensions of the problem area according to the research results as well as diversify the dimensions considering the target layer.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.582-586
• /
• 2005

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition (MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum (FWHM) decreased from 480 arcsec to 409 arcsec and threading dislocation (TD) density decreased from $3.21\times10^9\;cm^{-2}\;to\;9.7\times10^8\;cm^{-2}$. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GaN layer.

• 한국의류학회지
• /
• 제44권4호
• /
• pp.626-638
• /
• 2020

In this study, protective masks were designed in varying internal volume and analyzed in regards to wearing effect. Masks were measured by surface temperature and subjective wear evaluation. Four experimental masks were created with an increasing distance between the mask center line and nose in increments. The distances were set at 0.0 cm (M0), 2.0 cm (M2), 4.0 cm (M4), and 6.0 cm (M6). The area and volume of each experimental mask was measured and both measurements had a positive correlation with the set distances. Among the experimental masks, M2 was the most breathable. The heat between the face and the mask created by exhalation was able to escape from the mask and provided the highest comfort sensation when worn. Conversely, an internal volume that is too large would decrease its comfort because repetitive breathing deforms the appearance of the mask and adversely affects its fit. Therefore, creating and maintaining the optimal internal volume of the M2 mask is important to achieve maximum thermal sensation and ease of wear.