• Journal of ILASS-Korea
• /
• v.25 no.4
• /
• pp.178-187
• /
• 2020

The current emission regulations, US Tier-4 and EU Stage-V, are only able to satisfy the regulations when all currently mass-produced emission reduction technologies such as EGR, DOC, DPF, and SCR are applied. Therefore, in this study, for the application of the Urea-SCR system to non-road diesel engines, the database was established by measuring the NO, NO2 concentration and calculating the NO2/NOx ratio based on the catalyst temperature and exhaust mass flow rate. Also, based on the measured NO2/NOx ratio data, a mathematical model was proposed to predict the NO2/NOx ratio at SCR catalyst, and the suitability of the model was verified through steady-state and transient mode. As a result of comparing the NO2/NOx ratio measured at the DOC outlet under the steady-state condition to two model values separately, the R2 was 0.9811 for the 3D map model and 0.9303 for the mathematical model. And in the case of the NO2/NOx ratio measured at the DPF outlet, the R2 was 0.9797 for the 3D map model and 0.935 for the mathematical model. It was confirmed that the R2 with the model value of the 3D Map of the mathematical model in the transient mode is 0.957, which shows high reliability.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.81-99
• /
• 2015

The acceleration of global warming has required better understanding of carbon cycles over local and regional areas such as the Korean peninsula. Since forests serve as a carbon sink, which stores a large amount of terrestrial carbon, there has been a demand to accurately estimate such forest carbon sequestration. In Korea, the National Forest Inventory(NFI) has been used to estimate the forest carbon stocks based on the amount of growing stocks per hectare measured at sampled location. However, as such data are based on point(i.e., plot) measurements, it is difficult to identify spatial distribution of forest carbon stocks. This study focuses on urban areas, which have limited number of NFI samples and have shown rapid land cover change, to estimate grid-based forest carbon stocks based on UNFCCC Approach 3 and Tier 3. Land cover change and forest carbon stocks were estimated using Landsat 5 TM data acquired in 1991, 1992, 2010, and 2011, high resolution airborne images, and the 3rd, 5th~6th NFI data. Machine learning techniques(i.e., random forest and support vector machines/regression) were used for land cover change classification and forest carbon stock estimation. Forest carbon stocks were estimated using reflectance, band ratios, vegetation indices, and topographical indices. Results showed that 33.23tonC/ha of carbon was sequestrated on the unchanged forest areas between 1991 and 2010, while 36.83 tonC/ha of carbon was sequestrated on the areas changed from other land-use types to forests. A total of 7.35 tonC/ha of carbon was released on the areas changed from forests to other land-use types. This study was a good chance to understand the quantitative forest carbon stock change according to the land cover change. Moreover the result of this study can contribute to the effective forest management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.105-117
• /
• 2015

In this paper, we consider 19 cells with the two tiers for polar-rectangular coordinates (PRCs) and provide the cell edge performance of cellular networks based on distance from cell center i.e., BS (base station). When FFR is applied(or adopted) to cell edge, it is expected that BS cooperation, or a coordinated multipoint (CoMP) multiple access strategy will further improve the system performance. We proposed a new method to evaluate the sum rate capacity of the MIMO DC of multicell system. We improve the performance of cell edge users for intercell interference cancelation in cooperative downlink multicell systems. Simulation results show that the proposed scheme outperforms the reference schemes, in terms of cell edge SINR (signal-to-interference-noise ratio) with a minimal impact on the network path loss exponent. We show 13 dB improvements in cell-edge SINR by using reuse of three relative to reuse of one. BS cooperation has been proposed to mitigate the cell edge effect.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.476-489
• /
• 1999

HW/SW codesign is integrated design of systems implemented using both hardware and software components. Many design tools has been developed to support this new paradigm, so far. Current codesign tools are not widely used as been expected because of variety problems - rapidly evolving technology, platform dependency, absence of standard specification method, inconsistent user interface, varying target system, different functionality In this paper, we propose a web-based distributed HW/SW codesign environment to remedy this kinds of problem. Our codesign environment has object-based 3 tier client/server architecture. It supports collaborative workspace through session service. Fully object-oriented design of user interface(OOUI) enables easy extension without change of user Interface. Furthermore it contains transaction server and security server for efficient and safe transfer of design data. To show a validity of our design, we developed prototype of web-based HW/SW codesign environment called WebCEDA. Our model of HW/SW codesign can be used for web-based generic CAD tools.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.3
• /
• pp.414-419
• /
• 2007

Botryococcus braunii is a green colonial fresh water microalga and it is recognized as one of the renewable resources for production of liquid hydrocarbons. CFTRI-Bb-l and CFTRI-Bb-2 have been reported for the first time and their performance with regard to growth and biochemical profile is presented here. The present study focused on effect of carbon dioxide $(CO_2)$ on biomass, hydrocarbon, carbohydrate production, fatty acid profile, and carotenoid content in various species of B. braunii (LB-572, SAG 30.81, MCRC-Bb, N-836, CFTRI-Bb-l, and CFTRI-Bb-2) at 0.5, 1.0, and 2.0% (v/v) levels using a two-tier flask. $CO_2$ at 2.0% (v/v) level enhanced growth of the organism, and a two-fold increase in biomass and carotenoid contents was observed in all the B. braunii strains studied compared with control culture (without $CO_2$ supplementation). At 1 % and 2% (v/v) $CO_2$ concentrations, palmitic acid and oleic acid levels increased by 2.5 to 3 folds in one of the strains of B. braunii (LB-572). Hydrocarbon content was found to be above 20% at 2% $CO_2$ level in the B. braunii LB-572, CFTRI-Bb-2, CFTRI-Bb-l, and N-836 strains, whereas it was less than 20% in the SAG 30.81 and MCRC-Bb strains compared with control culture. This culture methodology will provide information on $CO_2$ requirement for growth of algae and metabolite production. B. braunii spp. can be grown at the tested levels of $CO_2$ concentration without much influence on culture pH.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6845-6848
• /
• 2014

This paper proposes a system design of IDS for detecting and defending against DDoS attacks on a network. The proposed system has three parts; the Alert, Attack Analyzer and Defense agent. When the server resource was reduced too much by incoming traffic, the Alert Agent sends message and traffic information to the Attack Analyzer. The message and traffic to the Attack analyzer include only the sender & receiver address and packet numbers for minimizing the overload of Attack Analyzer. Message Received Attack Analyzer investigates the Message. If the pattern of traffic is the same as the DDoS Style, the Analyzer sends a message to the Defense Agent to block that traffic. In this system, at the serious state of the server-down, the Attack analyzer uncovers the DDoS Attacker and send a message to the Defense Agent to block that traffic. This works for server reactivation as soon as possible.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.23-32
• /
• 2007

We propose a group-based security scheme for hierarchical wireless sensor networks. We model the network for secure routing with 3-tier sensor network comprised of three types of nodes: Base Station, Group Dominator and ordinary Sensor Nodes. Group-based deployment is performed using Gaussian (normal) distribution and show that more than 85% network connectivity can be achieved with the proposed model. The small groups with pre-shared secrets form the secure groups where group dominators form the backbone of the entire network. The scheme is devised for dealing with sensory data aggregated by groups of collocated sensors; i.e., local sensed data are collected by the dominating nodes and sent an aggregated packet to the base station via other group dominators. The scheme is shown to be light-weight, and it offers a stronger defense against node capture attacks. Analysis and simulation results are presented to defend our proposal. Analysis shows that robustness can significantly be improved by increasing the deployment density using both the dominating and/or ordinary sensor nodes.

• Journal of Korea Game Society
• /
• v.2 no.2
• /
• pp.113-119
• /
• 2002

With development of internet technology, digital economy that advance rapidly formed much leagues of B2B, B2C, A2B etc, according to the application part. Also, electronic commerce system implementation technology is introduced by Component based on development method in object oriented technique base depending on customer's requirement, and development environment changes by 3- Tiers, Web-Based architecture etc. in existent C/S (Client/Server) environment and is introduced. Thus, In this research, I implemented seat reservation and confirmation system that can be used in electronic commerce in multi-server environment. This, for improve efficiency in distribute environment, relevant importance logic used server component model EJB, and implemented through JSP and Java that use Servlet of Resin Server environment for Main Server. Therefore, through independence component using EJB, I did so that can improved independence between electronic commerce system logic, and reduce server's overhead calling relevant method through discrete EJB server, and manage each logic resources efficiently.

• Journal of architectural history
• /
• v.17 no.3
• /
• pp.7-21
• /
• 2008

Three-story Stone pagodas in Gameunsa Temple site, one of the early staged stone pagodas, has been known as a standard of Silla stone pagodas. A stone pagoda is not only a stone art work and but also a stone architecture. In understanding the stone pagoda it is very important to be approached with technological side in which we can investigate the stone pagoda deeply and as well as to have been approached with art historical view. Also it needs that we should see the stone pagoda in view of structural safety. We can get many high technique from our ancestors who made Gameunsajiseoktap. 1. To reduce any deformation such as relaxation and sinking of members which is caused by a heavy load the members such as the lower tier of the base is made up of the foundation stone and side stone in each, comprising one stone. 2. A special construction method for connection between wall stone and column stone in stereobates was invented. It is to make column stone projected partially and wall stone be caved in that two members should be jointed well. This unique method is not used any longer after the three-story Stone pagodas in Gameunsa Temple Site. 3. In each side upper and lower member are not engaged as the size of roof stones and support stones of roof stones are different. It can be done for a distribution of perpendicular load and a prevention for relaxation of members. 4. It makes sure that to make upper ends of support stones 10mm lower was to be avoid upper loads to it judging from survey in disassemblying east pagoda. It proves that ancestors who made this stone pagoda had a technique to understand the structural matters to make small members as big as possible, not to engage in joint, to avoid in ends of members from upper load.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.2
• /
• pp.25-34
• /
• 2004

Sixteen provincial Research Institute of Education and Science(RISE) in the country have provided good qualified multimedia educational materials that was produced by some special skilled teachers to elementary, middle and high school teachers using web services. And moreover KERIS and KICE have also produced educational materials and have a plan to integrate distributed multimedia educational materials that RISE produced. The development of KERIS's KEM metadata in 2001 and the making of educational material metadata of RISE is the first step of integration plan. These metadata can be used to make integration plan possible. But before taking integration plan, the study of how to integrate and manage it should be performed. Therefore, this paper introduces the technique of XML web service and JDBC with 3-tier system as the method of integrate distributed educational material metadata. The evaluation shows these two methods have similar response time with MS SQL Server 2000 and Oracle 9i. Thus, we conclude that JDBC and XML web service can be the proper solution to search XML-formatted metadata.