• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.133-138
• /
• 2001

We studied the optical properties of poly(3-hexylthiophene) for applying to the emitting material of organic electro luminescent device. The infrared spectrum and NMR of synthesized polymer gave good evidence for the conjugation of 3-hexylthiophene monomer unit. We confirmed that poly(3-hexylthiophene) contains the HT(head-to-tail)-HT(head-to-Tail) linkage larger than 65% based on NMR analysis. FTIR and raman spectroscopy show that poly(3-hexylthiophene) has two main vibration levels which have an energy about 0.18eV and 0.36eV. Electronic absorption spectra shifted to the shorter wavelength with increasing temperature, which is related to a conformational transition of the polymer. Photoluminescence spectrum generated at low temperature(10K) is separated at 669nm, 733nm and 812nm that it's because of phonon energy generated from the lattice vibration.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.337-343
• /
• 1992

FeCl$_{3}$등 천이금속 halides를 촉매로 이용하여 poly(3-hexylthiophene) 등의 가용성 polythiophene 유도체를 합성하였다. casting에 의해 작성한 필림은 전해중합 법에 의한 polythiophene 필림과 같은 특성을 나타낸다. Poly(3-hexylthiophene)의 용액 상태의 에너지 밴드 갭은 2.42(eV)이며 이것은 필림상태 보다 고분자 쇄간의 상호작용이 약하므로 밴드 갭이 더 크다. 또한 I$_{2}$를 도우프하면 고차 구조가 달라지므로 poly(3-hexylthiophene)은 polythiophene 보다 도핑속도가 더욱 빠르다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.57-60
• /
• 1998

Poly(3-hexylthiophene)(P3HT) was synthesized by use of FeCl$_3$ as a oxidizing agent at $25^{\circ}C$. The infrared spectrum of our polymer gave good evidence for the conjugation of 3-hexylthiophene monomer unit. P3HT contains the HT(head-to-tail) linkage larger than 64% based on NMR analysis. Electronic absorption and photoluminescence studies show that cast films of P3HT have three exciting state. Absorption spectrum was separated with three maximum peaks by Giese-French method and shifted to the shorter wavelength with increasing temperature. Separated absorption spectrum of P3HT is well adapted to PL peak appeared at longer wavelength. Low temperature PL spectrum is well separated at 669nm, 733nm and 812nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.164-168
• /
• 2005

We report high performance poly (3-hexylthiophene) organic field-effect transistors fabricated on a plastic substrate. The polymer active channel layer was directly printed by the rubber stamp printing method with a pre-patterned elastomer stamp. As a result. organic transistors having average field-effect mobility of 0.079 $cm^2/Vs$ and on/off ratio of $10^4{\sim}10^5$ were realized on a plastic substrate. Also, through the investigation of the molecular ordering of rubber-stamp-printed poly (3-hexylthiophene) films using synchrotron grazing-incidence X-ray diffraction measurements, the films were found to have edge-on structure which is favorable in realizing high performance organic transistors.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.193-195
• /
• 2010

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.95-100
• /
• 2011

During the development of low band-gap organic materials(p-type semiconducting organic compounds) for organic solar cells, an oligomer consisting of 2,5-dioctyloxyphenylene(OP), 3-hexylthiophene(HT), and 2,3-dimethylthieno[ 3,4-b]pyrazine(TP) as repeat units, oligo(OP-HT-TP), was synthesized. The oligomer was amorphous in nature in the temperature range studied, and well soluble in common organic solvents such as chloroform. The maximum absorption wavelength was 716 nm in solid state. The band-gap and HOMO/LUMO energy levels of oligo(OP-HT-TP) were measured to be 1.20 eV and -5.27/4.04 eV, respectively. However, the absorbance of the oligomer at maximum absorption wavelength was less than one fifth of that of poly(3-hexylthiophene) which has been most frequently used in fabrication of organic solar cells.

• Journal of the Korean Chemical Society
• /
• v.68 no.3
• /
• pp.146-150
• /
• 2024

Precise molecular configuration elucidation of poly(3-hexylthiophene) (P3HT) through advanced spectroscopic techniques is pivotal for enhancing P3HT-based photovoltaic device efficiencies since its high charge-carrier mobility is directly correlated to its well-ordered structure. In this study, we examine Raman depolarization ratios of annealed and non-annealed P3HT films to elucidate their intermolecular π-π configurations. Our findings suggest that the backbone of the annealed film possesses stronger π-π conjugation overlaps than that of the non-annealed film owing to the greater depolarization ratio of the annealed film. In addition, the depolarization ratios are also supported by theoretical calculations, where parallel-stacked thiophene structures display a higher depolarization ratio compared with that of twisted-stacked structures, as calculated by the Møller-Plesset perturbation theory. This study highlights the utility of polarized Raman spectroscopy as a versatile tool for assessing the degree of molecular order in highly conjugated polymer films.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.41-46
• /
• 2010

In this work, we report on the characterization of six low-$T_g$ poly[methyl-3-(9-carbazolyl) propylsiloxane] based photorefractive (PR) composites sensitized with poly(3-hexylthiophene) (P3HT) in different concentrations, ranging from 0.2 to 1 wt %. At 632.8 nm, photoconductivity, space charge field, refractive index modulation, and grating buildup time were measured versus external electric field. The photoconductivity was strongly dependent on the visible light absorption and mobility. The magnitude of space charge field was affected by the conductivity contrast $\sigma_{ph}/(\sigma_{ph}+\sigma_d)$. The refractive index modulation increased with the magnitude of space charge field and the PR grating buildup speed increased with the photoconductivity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.263-266
• /
• 1999

Electrolunlinescent devices based on conjugated polymer emitting materials have been much attracted possible applications for multicolor flat panel display, since the conjugated polymers have a small band gap emitting obtained at a low driving voltage. In this paper, we fabricated the single layer EL device using poly(3-hexylthiophene) as emitting material Electroluminescence(EL) and I-V-L characteristics of indium-tin-oxide[ITO]P3HT/AI device with a various thickness were investigated. It was demonstrate that the I-V characteristics depend, not the voltage but the electric- field strength, The current is dependent on the electric filed and not on the applied voltage, indicating that the carriers are injected by a tunneling process. In the device, the barrier to hole injection is only 0.5eV and the barrier to electron injection is 1.5eV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.637-640
• /
• 2008

The properties of oriented poly(3-hexylthiophene-2,5-diyl) in field effect transistors (FETs) have been investigated through mechanical stretching process as the original. Silicon-based FETs shown high mobility of $0.02\;cm^2/V$ s after thermal treatment and $0.0092\;cm^2/V$ s at r.t. PET-based FETs were expected to show a similar performance in mobility to that of silicon-based FETs.