• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.478-481
• /
• 2010

Antimony doped tin oxide (ATO) nanoparticles were added as nanofillers to UV-curable polyester-acrylate (PEA) resin for coating to improve thermal, mechanical, and electrical properties. In this study, ATO nanoparticles were grafted by 3-glycidyloxypropyltrimethoxysilane and 3-methacryloxypropyltrimethoxysilane respectively to improve dispersion and interfacial adhesion. The physical properties and surface scratch hardness of the UV-curable nanocomposite coating were improved considerably by introducing the modified ATO nanoparticles.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1183-1188
• /
• 2003

LCP (Liquid Crystal Polymer)/BT(BaTiO$_3$) composite was prepared by mixing LCP varnish and BT slurry. And the effect of the composition of LCP/BT composites and the size of BT powder on dielectric properties of LCP/BT composite were investigated. The dispersion properties of BT slurries were also studied as a function of volume fraction of dispersant, GLYMO (3-glycidyloxypropyltrimethoxysilane) added to various sized BT powders. The quantity of optimum dispersant in BT slurry decreased with an increase of BT powder size because of the decrease of specific surface area of BT powder. LCP/BT composite sheet was prepared by tape-casting method with mixing BT slurry and LCP varnish. The dielectric constant of the composites increased from 34.3 to 44.1 and their dielectric loss increased from 0.05 to 0.063 as the size of BT powder increased from 100 nm to 500 nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.388-394
• /
• 2008

For purpose of anti-static film remaining unchanged in the condition of $160^{\circ}C$, organic solvent, acid and base solution $0.01\sim0.03{\mu}m$ particles of Sb doped tin oxide(ATO) were grafted by 3-Glycidyloxypropyltrimethoxysilane(GPTS) for improving interfere bonding force between ATO and epoxy resin. The particles were dispersed in 2-methoxyethanol with YD-I28(Bisphenol A type epoxy resin, Kukdo chemical) and 1-imidazole as hardener. The anti-static solutions were coated on PI film as thickness of $0.1{\mu}m$. Surface resistivity of anti-static film containing conductive polymer became $10^{12}\Omega/\Box$ after 32 hours in $160^{\circ}C$. The surface resistivity of ATO grafted by GPTS / Epoxy coating layer remained as $10^{7.6}\Omega/\Box$ in $160^{\circ}C$ for 7 days. ATO grafted by GPTS / Epoxy coating layer coated on PI film was dipped in acetone for 7 days. The surface resistivity remained unchanged as $10^{7.6}\Omega/\Box$. The anti-static layer dipped in water solutions containing each KOH 10 wt % and $H_2SO_4$ 2 wt% was ultra-sonicated for 10 minutes per once until 30th. The surface resistance of anti-static layer containing ATO grafted by GPTS remained unchanged.