• 전자공학회논문지D
• /
• 제36D권11호
• /
• pp.45-55
• /
• 1999

정상상태에서 반도체 소자의 전기적 특성을 분석할 수 있는 소신호 해석용 시뮬레이터를 개발하였다. 전위와 전자 및 정공 농도의 Slotboom변수에 대한 소신호 응답을 정의한 후 $S^3A$방법을 적용하여 ,DC 동작점에서 반도체 방정식을 선형화하였다. 행렬풀이를 위해 전진해법을 사용하여 메모리 소비량을 최소화하며 고주파 영역에서 소신호 해의 정확성을 향상시켰다. 구현된 알고리즘의 검증을 위해 3차원 구조를 갖는 N'P 다이오드 및 2차원 구조를 갖는 n-MOSFET에 대해 소신호 해석을 수행하여 MEDICI와 비교한 결과, 인가 전압에 따른 컨덕턴스와 캐패시턴스의 평균 상대 오차는 N'P 다이오드에서는 0.87%와 2.6%이고, n-MOSFET의 경우 7.75%와 2.24%로 나타났다. n-MOSFET에 대하여 입력신호의 주파수 변화에 따른 컨덕턴스와 캐패시턴스를 비교한 결과 MEDICI의 경우 10GHz까지 예측한 반면 본 논문이 제시한 방법을 이용한 모의실험은 100GHz까지 예측이 가능하여 고주파 영역에서 모의실험의 정확도가 향상됨을 확인하였다.

• 한국방사선학회논문지
• /
• 제17권3호
• /
• pp.315-325
• /
• 2023

본 연구는 복부 비만도에 따라 콩팥 크기의 상관관계를 분석하여 3차원 전산화단층영상(3-Dimensional Computed Tomography, 3D CT)의 콩팥 크기 계측으로 복부 비만도를 예측하고자 하였다. 대상자는 전주 예수병원 건강의학센터에서 종합검진을 받은 자로 기저질환이 없는 건강한 성인 178명으로 하였다. 복부 비만도는 CT의 배꼽 주변의 횡단면에서 내장지방 면적, 피하지방 면적, 비만도로 구분하여 측정하였다. 복부 비만도 간에 따라 분류한 콩팥 크기의 평균 비교는 일원배치 분산분석(One-way analysis of variance, ANOVA) 및 Scheffe 사후 검정을 통해 시행하였다. 모든 계측 값의 상관관계는 Pearson 상관분석 하였다. 그 결과 복부 비만도에 따른 콩팥 크기 ANOVA 분석 결과는 다음과 같다. 내장 지방도 간에 따른 콩팥 계측치의 평균은 모든 콩팥 계측치에서 유의한 차이가 있었다(p<0.05). 피하 지방도 간에 따른 콩팥 계측치의 평균은 3D CT 우측 콩팥 너비 계측 시 중증 비만군에서 유의한 차이를 보였다(p<0.05). 비만도 간에 따른 콩팥 계측치의 평균은 3D CT 우측 콩팥 너비와 좌측 콩팥 너비 계측 시 중증 비만군에서 유의한 차이를 보였다(p<0.05). 콩팥 계측치와 CT 복부 비만도 간의 Pearson 상관분석 결과 내장지방 면적은 3D CT 좌측 콩팥 너비와 상대적으로 높은 양의 상관관계(r=0.467)를 보였으며 피하지방 면적은 3D CT 우측 콩팥 너비와 양의 상관관계(r=0.249)를 보였다. 비만도에서는 3D CT 좌측 콩팥 너비와 양의 상관관계(r=0.291)를 보였다.

• 대한치과교정학회지
• /
• 제50권1호
• /
• pp.3-12
• /
• 2020

Objective: This study compared three prominent midsagittal planes (MSPs) to identify the MSP that best approximates the true symmetrical MSP. Methods: Forty-three patients (mean age, 23.0 ± 8.20 years) were grouped as follows: group 1 consisted of 10 patients with skeletal Class I and a menton (Me) deviation of < 2 mm; group 2, 11 patients with skeletal Class III and a Me deviation < 2 mm; group 3, nine patients with skeletal Class III and a Me deviation of 2 to less than 4 mm; and group 4, 13 patients with skeletal Class III and an Me deviation ≥ 4 mm. The candidate MSPs were established by three-dimensional (3D) cone beam computed tomography (CBCT) reorientation methods (RMs): (1) the MSP perpendicular to the Frankfort horizontal (FH) plane while passing through the crista galli and basion; (2) the MSP including the nasion, incisive foramen, and basion; (3) the MSP including the nasion, anterior nasal spine, and posterior nasal spine. The mean absolute distances (MADs) to the MSPs were calculated from the coordinates of 1,548 points on 129 CBCT images. The differences in the values of the 3D coordinates among RMs were compared. Results: The MADs of the three RMs showed significant differences (p < 0.05). Most of the differences in values of the coordinates were not significant among RMs. Conclusions: Although the differences in distance among the three MSPs were minor, the MSP perpendicular to the FH plane while passing through the crista galli and basion best approximated the true symmetrical MSP.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.31-31
• /
• 2002

The hydrothermal reaction of Zn(NO₃)₂6H₂O with benzene-1,3-dicarboxylic acid (or isophthalic acid, 1,3-BDCH₂) and pyridine led to the formation of a 1-dimensional coordination polymer with the empirical formula of [Zn₄(1,3-BDC)₃(Py)₂(O/sup 2-/)] (1). On the other hand, the hydrothermal reaction of Tb(NO₃)₃5H₂O with benzene-1,3-dicarboxylic acid (or isophthalic acid, 1,3-BDCH₂) and pyridine gave a 3-D compound [Tb₃(1,3-BDC)₂(H₂O₃] (2). The structures of both compounds have been determined by X-ray diffraction. 1 crystallizes in the monoclinlc space group P2₁/n, a = 10.344(3) Å, b = 18.030(3) Å, c = 18.033(3) Å, = 90.46(2)°, V = 3363.1(13) ,ų, Z = 4. 2 crystallizes in the monoclinic space group C2/n, a = 22.253(5) Å, b = 18.672(4) Å, c = 11.5812 Å, = 101.40(2)°, V = 4717.3(21) ų, Z = 8.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.607-608
• /
• 2009

• Journal of applied mathematics & informatics
• /
• 제3권1호
• /
• pp.89-100
• /
• 1996

In this paper we investigate a limit theorem for a non-statioary d-parameter array of associated random variables applying the criterion of the tightness condition in Donsker, M[1951]. Our re-sults imply an extension to the nonstatioary case of Convergence of Probability Measure of billingsley. P[1986]. and analogous results for the d-dimensional associated random measure. These results are also applied to show a new limit theorem for Poisson cluster random mea-sures.

• 한국치위생학회지
• /
• 제19권6호
• /
• pp.1089-1097
• /
• 2019

Objectives: The purpose of this study is to assess the accuracy of provisional restorative resins fabricated using dental three-dimensional (3D) printers. Methods: Provisional restorative resins were fabricated using the first molar of the right mandibular. Three groups comprising a total of 24 samples of such resins were fabricated. The prepared abutment was scanned initially and then designed using a computer-aided design (CAD) software. The conventional subtractive manufacturing system was employed to fabricate the first group of resins, while the second and third groups were fabricated using a digital light processing (DLP) 3D printer and a stereolithography (SLA) 3D printer, respectively. The internal surfaces of the resins were scanned and 3D measurements of the resins were taken to confirm their accuracy. Results: The root-mean-square deviation (RMS±SD) of the accuracy of the resins fabricated using the conventional subtractive manufacturing system, DLP 3D printer, and SLA 3D printer were 68.83±2.22 ㎛, 74.63±6.23 ㎛, and 61.74±4.09 ㎛, respectively. A one-way analysis of variance (ANOVA) test showed significant differences between the three groups (p < 0.05). Conclusions: Provisional restorative resins fabricated using DLP and SLA 3D printers demonstrated clinically-acceptable results.

• Korean Journal of Radiology
• /
• 제20권4호
• /
• pp.641-648
• /
• 2019

Objective: The purpose of this study was to investigate whether three-dimensional (3D) magnetic resonance imaging could improve diagnostic accuracy for suspected posterior ligamentous complex (PLC) disruption. Materials and Methods: We used 20 freshly harvested goat spine samples with 60 segments and intact surrounding soft tissue. The animals were aged 1-1.5 years and consisted of 8 males and 12 females, which were sexually mature but had not reached adult weights. We created a paraspinal contusion model by percutaneously injecting 10 mL saline into each side of the interspinous ligament (ISL). All segments underwent T2-weighted sagittal and coronal short inversion time inversion recovery (STIR) scans as well as coronal and sagittal 3D proton density-weighted spectrally selective inversion recovery (3D-PDW-SPIR) scans acquired at 1.5T. Following scanning, some ISLs were cut and then the segments were rescanned using the same magnetic resonance (MR) techniques. Two radiologists independently assessed the MR images, and the reliability of ISL tear interpretation was assessed using the kappa coefficient. The chi-square test was used to compare the diagnostic accuracy of images obtained using the different MR techniques. Results: The interobserver reliability for detecting ISL disruption was high for all imaging techniques (0.776-0.949). The sensitivity, specificity, and diagnostic accuracy of the coronal 3D-PDW-SPIR technique for detecting ISL tears were 100, 96.9, and 97.9%, respectively, which were significantly higher than those of the sagittal STIR (p = 0.000), coronal STIR (p = 0.000), and sagittal 3D-PDW-SPIR (p = 0.001) techniques. Conclusion: Compared to other MR methods, coronal 3D-PDW-SPIR provides a more accurate diagnosis of ISL disruption. Adding coronal 3D-PDW-SPIR to a routine MR protocol may help to identify PLC disruptions in cases with nearby contusion.

• Investigative Magnetic Resonance Imaging
• /
• 제21권3호
• /
• pp.131-138
• /
• 2017

Purpose: To optimize the timing of scans using cardiac magnetic resonance contrast-enhanced timing robust angiography (CMR-CENTRA) for electroanatomic mapping (EAM) of the right atrium (RA) and left atrium (LA) in patients with atrial fibrillation (AF). Materials and Methods: Fifty patients with AF (38 men; mean age, $59.6{\pm}9.3years$) underwent CMR-CENTRA in preparation for EAM. The CMR-CENTRA data were acquired at five different scan times: 0 seconds, 5 seconds, 10 seconds, 15 seconds, and 20 seconds after an intravenous injection of contrast media. To evaluate the degree of contrast enhancement, right atrial relative contrast (RA-RC) and left atrial relative contrast (LA-RC) on the CMR-CENTRA scans were assessed at each time point. The three-dimensional (3D) reconstruction of the RA and LA for the EAM system was performed using the CMR-CENTRA data. Results: A CMR-CENTRA at a scan time of 10 seconds showed significantly greater LA-RC (P < 0.05) compared with all other scan times. A CMR-CENTRA at a scan time of 15 seconds showed significantly greater RA-RC (P < 0.05) compared with all other scan times. In the 3D reconstruction of the RA, the success rates of CMR-CENTRA at scan times of 10 seconds and 15 seconds were 18% and 100%, respectively. In the 3D reconstruction of the LA, the success rates of CMR-CENTRA at 10- and 15-second scan times were 100%. Conclusion: The CMR-CENTRA data acquired at 15 seconds after the injection of contrast media is appropriate for the preparation of an EAM system that is focused on the RA and LA in patients with AF.

• 한국전문물리치료학회지
• /
• 제26권3호
• /
• pp.99-105
• /
• 2019

Background: Although magnetic resonance imaging is accurate, it is expensive to measure the movement of temporomandibular joint. The three-dimensional (3D) motion analysis system is an inexpensive measurement tool. Objects: This study examined the reliability of quantifying the mouth opening and lateral mandibular shift and differences between individuals with and without temporomandibular disorder (TMD) using the hygienic method of surface markers on the skin with 3D ultrasound-based motion analysis. Methods: This study included 24 subjects (12 with and 12 without TMD). Temporomandibular joint motion during mouth opening was recorded using two surface markers with 3D ultrasound-based motion analysis. An intraclass correlation coefficient [ICC (3,k)] was used to confirm the intrarater reliability of quantifying kinematic temporomandibular joint motion, and an independent t-test was used to evaluate differences in maximal mouth opening and lateral mandibular shift between the two groups. Results: Assessment of mouth opening and lateral mandibular shift showed excellent test-retest reliability with low standard error of measurement. The lateral mandibular shift and opening-lateral mandibular shift ratio were significantly increased in the TMD group during maximum mouth opening (p<.05). However, no significant difference in maximal mouth opening was observed between the groups with and without TMD (p>.05). Conclusion: This hygienic and simple surface marker method can be used to quantify the mouth opening and lateral mandibular shift at the end-range of mouth opening. The TMD group showed an increased lateral mandibular shift movement at the end-range of mouth opening. The lateral mandibular shift movement can be regarded as a symptom in the diagnosis and treatment of TMD.