• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2011

The national spatial information systems project which is promoted by our country has been extended from existing 2-D geographic information to 3-D spatial information as the basic geo-spatial Information. Most of the construction of the ground geo-spatial information are completed or underway, on the other hand, the construction of the subsurface geo-spatial information has difficulty caused by the lack of the drilling data characterizing the subsurface. In terms of the construction of the geo-spatial information of the subsurface, the subsurface information is constructed and managed by the domestic institutions, but the subsurface information which is possessed by the institutions was not shared mutually so it is managed inefficiently. This study presented the 3-D national underground information DB design by dividing with the ground DB item which configures the state of the ground and the soil DB item which configures the state of the soil in order to increase the efficiency of the construction of the subsurface spatial information. The implementation & utilization of the national underground information application technology was reviewed by applying the constructed DB to the actual model area, and the national underground information knowledge-based community establishment plan was presented.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.13-21
• /
• 2011

The purpose of this study is enhancing CFD model by applying detailed and accurate CFD input data produced from 3D City model and integrating CFD model with 3D city model with OpenGL, 3D city aerodynamic simulation, and visualization tool. CFD_NIMR_SNU model developed by NIMR and SNU and 3D City model produced by NGII were used as input data. Wind flow and pollution diffusion simulator and viewer were developed in this study. Atmospheric environment simulation and visualization tool will save time and cost for urban climate planning and management by enhancing visual communication.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.23-32
• /
• 2018

The purpose of this study is to establish a walking energy weighted ERAM model that can predict the pedestrian volume by the connection structure of the vertical and horizontal spaces within a three-dimensional building. The process of building a walking-energy weighted ERAM model is as follows. First, the spatial graph was used to reproduce three-dimensional buildings with vertical and horizontal spatial connection structures. Second, the walking energy was measured on the spatial graph. Third, ERAM model was used to apply weights with spatial connection properties in random walking environment, and the walking energy weights were applied to the ERAM model to calculate the walk energy weighted ERAM values and visualize the distribution of pedestrian flow. To verify the validation of the established model, existing and proposed spatial analysis models were compared to real space. The results of this study are as follows : The model proposed in this study showed as much elaborated estimation of pedestrian traffic flow in real space as in traditional spatial analysis models, and also it showed much higher level of forecasting pedestrian traffic flow in real space than existing models.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.157-166
• /
• 2009

There is a growing interest in ubiquitous-related research and applications. Among them, GPS-based LBS have been developed and used actively. Recently, with the increase of large size buildings and disastrous events, indoor spaces are getting attention and related research activities are being carried out. Core technologies regarding indoor applications may include 3D indoor data modeling and localization sensor techniques that can integrate with indoor data. However, these technologies have not been standardized and established enough to be applied to indoor implementation. Thus, in this paper, we propose a method to build a relatively simple 3D indoor data modeling technique that can be applied to indoor location based applications. The proposed model takes the form of 2D-based multi-layered structure and has capability for 2D and 3D visualization. We tested three prototype applications using the proposed model; CA(cellular automata)-based 3D evacuation simulation, network-based routing, and indoor moving objects tracking using a stereo camera.

• Spatial Information Research
• /
• v.21 no.2
• /
• pp.73-83
• /
• 2013

3D cadaster problems are getting attention and studied increasingly. However, correct concepts have not been established for three dimensional land uses and different rights problems around them. This is primarily due to the lack of proper methods for implementation and operation of 3D cadaster. 3D cadaster requiring far more huge data than 2D should be built in DBMS and need appropriate methods and processes for this. This study propose a method to model 3D cadaster using DBMS. First, it analyse and visualize possible problems around divided superficies in 3D spaces. Based on this, it illustrates UML models and shows an O-R mapping process to implement them using a RDBMS.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.82-87
• /
• 2002

RFM is the sensor model of IKONOS imagery for end-users. IKONOS imagery vendors provide RPC (Rational Polynomial Coefficients), Ration Function Model coefficients for IKONOS, for end-users with imagery. So it is possible that end-users obtain geospatial information in their IKONOS imagery without additional any effort. But there are requirements still fur rigorous 3D positions on RPC user. Provided RPC can not satisfy user and company to generate precision 3D terrain model. In IKONOS imagery, physical sensor modeling is difficult because IKONOS vendors do not provide satellite ephemeris data and abstract sensor modeling requires many GCP well distributed in the whole image as well as other satellite imagery. Therefore RPC modification is better choice. If a few GCP are available, RPC can be modified by method which is introduced in this paper. Study on evaluation modified RPC in IKONOS reports reasonable result. Pseudo GCP generated with vendor's RPC and additional GCP make it possible through sequential solution.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.2
• /
• pp.97-109
• /
• 2024

This study presents a methodology for generating LoD1 objects using 2D spatial data in Shapefile format, converting them into CityGML 3.0 standard files, and applying textures for validation. High-resolution Z-values were extracted using DEM data, and a constrained Delaunay triangulation algorithm was applied to create LoD1 objects efficiently. Orthophoto TIF files were used as textures for these generated objects to achieve realistic visual representation. Finally, the CityGML 3.0 Validator tool was used to verify that the generated LoD1 models comply with the CityGML 3.0 standard. This research offers an efficient LoD1 object generation and texture application method that enhances visual realism, which can be beneficial for urban planning, disaster management, and smart city implementation.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.137-149
• /
• 2004

For 3D modelling artificial objects with computers, we have to draw frames and paint the facet images on each side. In this paper, a geographic modelling system building automatically 3D geographic spaces using GIS data and real images of buildings is proposed. First, the 3D model of terrain is constructed by using TIN and DEM algorithms. The images of buildings are acquired with a camera and its position is estimated using vertical lines of the image and the GIS data. The height of the building is computed with the image and the position of the camera, which used for making up the frames of buildings. The 3D model of the building is obtained by detecting the facet iamges of the building and texture mapping them on the 3D frame. The proposed geographical modeling system is applied to real area and shows its effectiveness.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.249-250
• /
• 2010

The study aims to propose a method that shall rapidly acquire 3D spatial information of the frequently changing city areas by using the low altitude aerial images taken by the UAV. The artificial 3D model of the artificial structures was constructed using the aerial image data photographed at the test area, calibration data of the non-metric camera and the results of the ground control point survey. Also, the digital surface model was created for areas that were changed due to a number of civil works. Through the above studies, the possibilities of constructing a 3D virtual city model, renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.