• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.385-394
• /
• 2011

The purpose of this research is to compare and analyze visual images between the Real garment and the 3D garment simulation with the various fabrics of flare skirts and to analyze the correlation between mechanical properties and visual images. The picture images (printed on paper) of the Real garment and the 3D garment simulation of experimental flare skirts were shown to the evaluation group of women in their 20s majoring in clothing and textiles, and were evaluated by questionnaires with 32 adjectives. SPSS Version 12.0 statistics program was utilized to analyze data. Factor analysis, One Way ANOVA, T-test and Duncan test were used to investigate visual effect of the Real garment and the 3D garment simulation. As the result of conducting factor analysis on the visual appearance, the images were driven with five factors: 'drapeability', 'attractive', 'body compensation', 'bulkiness', 'activeness'. Visual images were significantly related with mechanical properties of various fabrics, and the visual images between 3D garment simulations and real garment differed with various fabrics and their mechanical properties. Visual images of silk and polyester group, cotton, linen and wool group were significantly related with weight and thickness of kinds of fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.631-640
• /
• 2012

This research project investigates the differences of various body locations (between 3D body models) and drapes garments digitally onto 3D body models. Three different subject models will be given explication. It consisted of (1) data collection of three-dimensional scans (2) creation of 3D body representations (3) comparison of avatar shapes and measurements (4) visualization and assessment of 3D body models and their 3D virtual garments. The study tests a theory of impact by differences in avatars by pattern design. A visual inspection of avatars showed clear differences between the six avatar types (in the generating process); however, there was notably less difference between 3D garment simulations based upon the six avatars produced. This demonstrated that there was less influence on the 3D garments than was predicted after a visual inspection of the avatars.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.215-221
• /
• 2017

This paper describes a method of precise estimation for printing time and material consumption which are directly related to the 3D printing cost. Printing process and head motion of 3D printers using digital printing head, which is analyzed by its digitized steps, is rapidly simulated without slicing to calculate estimated printing results. Using this method, printing time and material usage of 3D printer were estimated quickly and precisely and compared to the real printing result. Applying compensation using the printing parameters, transferred from the 3D printer to the printing estimation system, even more accurate estimation is achieved. This method is used in the 3D Sprint software.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.108-112
• /
• 2016

This study is established the data-centric design concept, which is the latest design technique, by analyzing existing study literature for its application on the nuclear power plant industry in Korea. This study investigated the data-centric design cases in the advanced companies and suggests a data-centric design integrated system framework by analyzing the major functions of the commercial 3D CAD system, which is globally used in the plant architect engineering. In order to apply the data-centric design integrated system framework to the nuclear power plant industry in Korea, the main functions of a nuclear power plant design information integrated system framework, which can manage the design products of each EPC step and the related information in integrated way, is suggested by analyzing the supplier design, field design process and field design drawings, which have close relation with the plant Architect Engineering (A/E). It is expected that the result of this study would contribute in the dramatic enhancement in the job efficiency of nuclear power plant design process in Korea.

• Ocean Systems Engineering
• /
• v.3 no.4
• /
• pp.257-273
• /
• 2013

Top tensioned riser (TTR) is often used in a floating oil/gas production system deployed in deep water for oil/gas transport. This study focuses on the extension of the existing numerical code, known as CABLE3D, to allow for static and dynamic simulation of a TTR connected to a floating structure through a tensioner system or buoyancy can, and restrained by riser guides at different elevations. A tensioner system usually consists of three to six cylindrical tensioners. Although the stiffness of individual tensioner is assumed to be linear, the resultant stiffness of a tensioner system may be nonlinear. The vertical friction between a TTR and the hull at its riser guide is neglected assuming rollers are installed there. Near the water surface, a TTR is forced to move horizontally due to the motion of the upper deck of a floating structure as well as related riser guides. The extended CABLE3D is then integrated into a numerical code, known as COUPLE, for the simulation of the dynamic interaction among the hull of a floating structure, such as spar or TLP, its mooring system and riser system under the impact of wind, current and waves. To demonstrate the application of the extended CABLE3D and its integration with COUPLE, the numerical simulation is made for a truss spar under the impact of Hurricane "Ike". The mooring system of the spar consists of nine mooring lines and the riser system consists of six TTRs and two steel catenary risers (SCRs).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1671-1680
• /
• 2014

There are always much concern about the leakage of radiation materials in the event of dismantle or unexpected accident of nuclear power plant. In order to remove the leakage of radiation materials, appropriate dispersion detection techniques for radiation materials are necessary. However, because direct handling of radiation materials is highly restricted and risky, developing radiation-related techniques needs computer simulation in advance to evaluate the feasibility. In this paper, we propose a radiation imaging technique which can acquire 3D dispersion information of radiation materials and tested by simulation. Using two virtual 1D radiation sensors, we obtain stereo radiation images and acquire the 3D depth to virtual radiation materials using stereo disparity. For point and plane type virtual radiation materials, the possibility of the acquisition of stereo radiation image and 3D information are simulated.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.35-42
• /
• 2018

This article presents clean core criticality calculations and control rod worth calculations for TRIGA (Training, Research, Isotope production-General Atomics) Mark II research reactor benchmark cores using Winfrith Improved Multi-group Scheme-D/4 (WIMS-D/4) and Program for Reactor In-core Analysis using Diffusion Equation (PRIDE) codes. Cores 133 and 134 were analyzed in 2-D (r, ${\theta}$) and 3-D (r, ${\theta}$, z), using WIMS-D/4 and PRIDE codes. Moreover, the influence of cross-section data was also studied using various libraries based on Evaluated Nuclear Data File (ENDF/B-VI.8 and VII.0), Joint Evaluated Fission and Fusion File (JEFF-3.1), Japanese Evaluated Nuclear Data Library (JENDL-3.2), and Joint Evaluated File (JEF-2.2) nuclear data. The simulation results showed that the multiplication factor calculated for all these data libraries is within 1% of the experimental results. The reactivity worth of the control rods of core 134 was also calculated with different homogenization approaches. A comparison was made with experimental and reported Monte Carlo results, and it was found that, using proper homogenization of absorber regions and surrounding fuel regions, the results obtained with PRIDE code are significantly improved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.765-768
• /
• 2008

To make 3D camera system, we check the possibility of advanced range camera module based on measuring the time delay of modulated infrared light, using a single detector chip fabricated on standard CMOS process. To depth information, electronic shutter and interlaced scanning method of 2D sensor is needed. Especially, we design "lens system, illumination unit" and review simulation result.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.383-387
• /
• 2010

The stereoscopic three-dimensional (3D) display provides a 3D image by inducing binocular disparity for the observers who wear special glasses. With the rapid progress in flat panel display technologies, the stereoscopic 3D display is becoming a new benefit-model of the current display industry, and several kinds of commercial stereoscopic 3D products have been released and are attracting people. Nowadays, the motion picture quality of the 3D image becomes as important as resolution or luminance since most of the commercial 3D products are 3D televisions or 3D monitors which are required to display a clear motion 3D image. In this paper, an analysis and simulation of the motion picture quality of stereoscopic 3D image is proposed, and a comparison of the motion picture performance among the current stereoscopic 3D technologies is also provided.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.29-37
• /
• 1999

Pursuing a higher quality of life, citizens are becoming mere interested in the urban landscape surrounding therm. A well maintained landscape provides visual aesthetics for people who appreciate it. However, because of the difficulty in measuring landscape value quantitatively, establishing proper strategies for the landscape management has always been a problem For these circumstances, this study was conducted with the following purposes : estimating of openness and the other useful purposes by 3D simulation program. This study also provides information useful for builder s rational price strategy.