• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.185-189
• /
• 2012

We report plasma-assisted molecular beam epitaxy of $In_XGa_{1-X}N$ films on c-plane sapphire substrates. Prior to the growth of $In_XGa_{1-X}N$ films, GaN film was grown on the nitride c-plane sapphire substrate by two-dimensional (2D) growth mode. For the growth of GaN, Ga flux of $3.7{\times}10^{-8}$ torr as a beam equivalent pressure (BEP) and a plasma power of 150 W with a nitrogen flow rate of 0.76 sccm were fixed. The growth of 2D GaN growth was confirmed by $in-situ$ reflection high-energy electron diffraction (RHEED) by observing a streaky RHEED pattern with a strong specular spot. InN films showed lower growth rates even with the same growth conditions (same growth temperature, same plasma condition, and same BEP value of III element) than those of GaN films. It was observed that the growth rate of GaN is 1.7 times higher than that of InN, which is probably caused by the higher vapor pressure of In. For the growth of $In_xGa_{1-x}N$ films with different In compositions, total III-element flux (Ga plus In BEPs) was set to $3.7{\times}10^{-8}$ torr, which was the BEP value for the 2D growth of GaN. The In compositions of the $In_xGa_{1-x}N$ films were determined to be 28, 41, 45, and 53% based on the peak position of (0002) reflection in x-ray ${\theta}-2{\theta}$ measurements. The growth of $In_xGa_{1-x}N$ films did not show a streaky RHEED pattern but showed spotty patterns with weak streaky lines. This means that the net sticking coefficients of In and Ga, considered based on the growth rates of GaN and InN, are not the only factor governing the growth mode; another factor such as migration velocity should be considered. The sample with an In composition of 41% showed the lowest full width at half maximum value of 0.20 degree from the x-ray (0002) omega rocking curve measurements and the lowest root mean square roughness value of 0.71 nm.

• Korean Journal of Agricultural Science
• /
• v.34 no.2
• /
• pp.99-109
• /
• 2007

Cellulomanas sp. CS 1-1 was studied for its morphological, physiological and biochemical characteristics, together with DNA homology and fatty acid pattern to elucidate its taxonomical position in the species level. Colony morphology of CS1-1 exhibited circular form, opaque, convex, entire edge and pale yellow. Cells were of rod with the size of $0.3{\sim}0.5{\times}0.8{\sim}1.2{\mu}m$, while coryneforms were formed at the early stage of culture. D-ribose, raffinose, rhamnose, acetate, propionate, L-lactate, D-gluconate, aspartate and proline were not utilized as a sole source of carbon, whereas saccharose, arabinose, and amlyose were utilized. Biochemical characteristics of CS1-1 were Gram positive, catalase positive, oxidase negative, nonmotile, facultative anaerobic, mesophilic and G+C content of 74.7 mol %. The major fatty acid and menaquinone were 12-methyltetradecanoic acid(anteiso-$C_{15:1}$) and MK-$9(H_4)$, respectively. These results were correspondent with the characteristics reported for member of the genus Cellulomonas. The strain CS 1-1 exhibited a high level of DNA homology as 70% with C. uda ATCC491, compared to those of 54~59% with C. fimi ATCC 15724, 46~48% with C. biazotea, C. gelida and C. bibula. Finally, strain CS1-1 could be classified as a novel species belongs to C. uda.

• The KIPS Transactions:PartD
• /
• v.14D no.3 s.113
• /
• pp.355-362
• /
• 2007

With development of mobile communications terminal and expansion of mobile Internet, a large number of users can use mobile web contents at anytime and anywhere and will demand service of greater contents. Due to such demand, many studies are being carried out on transcoding contents so that wired web contents can be used in mobile web. However, transcoding and creation of mobile web contents involve difficulties because specifications available from telecommunications companies and mobile terminals have not been standardized. Especially, in order for serving dynamic object of wired web page contents to dynamically change according to time or user, it is required not only to program scripts to suit each terminal, but also to transcode the resources used in advance. for solution to this problem, this study uses the hierarchy structure of DOM (document object model) to display structural characteristics of wired web page. In other words, this study proposes the following technique. Wired web pages are analyzed and the results are established as data structure. Then, dynamic object is extracted and the domain is indexed so that, when serving mobile web page, information can be extracted at the indexed position to create mobile web contents for service on real-time basis. Also, this study aims at developing an editing device to edit mobile web contents and mobile web service server to service the edited contents by applying the above technique.

• Progress in Medical Physics
• /
• v.10 no.3
• /
• pp.151-157
• /
• 1999

The GafChromic film was used for the dosimetry of a balloon angio catheter filled with the radioisotope HO-166 for endovascular irradiation. The balloon angio catheter was 2 cm long and 3 mm in diameter when inflated. The isotope, Ho-166, was produced by the neutron bombardment using the research reactor in Korea Atomic Energy Research Insititute. Co-60 teletherapy beam was used for making H-D curve for the Gaf-Chromic film. The film dosimetry was measured with a videodensitometer. The radial dose distribution indicated that the absorbed dose dropped to about 20% of the surface dose at the 1 mm away from the balloon surface and at 5 mm position the dose decreased to below 1% of the surface dose. The result also shows that with the specific activity of Ho-l66, 250 mCi/ml it takes 230 seconds to deliver 1200 cGy to the region where is 1mm away from the balloon surface. The concentric isodose curves were also presented. The Ho-166 is an another alternative for endovascualr irradiation to prevent restenosis after PTCA (Percutaneous Trans Coronary Angioplasty)

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.3
• /
• pp.324-339
• /
• 2005

The WTO/DDA Negotiation on the Fisheries Subsidies started by DDA(Doha Development Agenda : 2001.11)at early 2002 has been held about 20 times until the fist half of 2005. The Negotiation will be terminated until the end of 2005 but now, it is impossible to predict the exact conclusion of the Negotiation. There is a sharp conflict of opinion on the WTO/DDA Negotiation on the Fisheries Subsidies between FFG(Fish Friends Groups : USA, New Zealand etc) and Anti-FFG(Rep. Korea, Japan etc). The Fisheries Subsidies is regulated by the WTO/DDA Negotiation that regulates on the subsidies of industrial products, fisheries products, forest products. Considering the progress of the WTO/DDA Negotiation on the Fisheries Subsidies, Guidelines for the Fisheries Subsidies Negotiation were established in Doha Ministerial Declaration at 2001 and a necessity of a special regulation on the Fisheries Subsidies has been discussed from 2002 to 2004. After june, 2004, the Negotiation was proceeding as Rep. Korea, Japan and Taiwan agreed with discussing a special regulation on the Fisheries Subsidies and At 1st, August, 2004, they reached an agreement on a necessity of a special regulation on the Fisheries Subsidies. At Feb, 2005, discussion was suspended because of presenting the joint proposal from 3 countries(Rep. Korea, Japan and Taiwan) and now discussion on the Fisheries Subsidies is giving the first consideration to classification of prohibited/non-actionable subsidies, S&D of a developing countries, small fisheries, problems of farming, grace period etc. From now on, Considering the 18th~the 20th negotiations, it is expected that discussion of fisheries subsidies regulation including property and range of prohibited/non-actionable subsidies, S&D of a developing countries, a definition of small fisheries is accelerated. In this point of view, this paper analyzed and arranged every country's proposals holding our own position and took a survey to fishermen and fisheries experts about prohibited/non-actionable subsidies. In addition, this paper intends to suggest the way of future-negotiation and provides essential data to help government's policy making through analyzing prohibited/ non-actionable subsidies, farming subsidies, S&D of a developing countries, small scale fisheries.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.336-344
• /
• 2011

The purpose of this study is to analyze the radiation-pattern characteristics above 1 GHz for the electromagnetic wave radiated from multi-slot such as ventilations, etc. on the enclosure of an EUT and so to make recommendations for suitable test methods. An experimental EUT was formed by putting a comb-generator at the center of a rectangular enclosure with 4 slots, and its radiation pattern was analyzed in the frequency range of 1~6 GHz. As analysis results, multi-lobe appears above 2 GHz and the number of multi-lobes is growing as the frequency increases. And real radiated-emission measurements were performed for the experimental EUT by scanning a receiving antenna in the height of 1~4 m and tilting toward maximum radiation, as well as setting the height of a receiving antenna to the central position of the EUT which is prescribed at the present standards. The measured results are +12.8 dB in the scanning and +16.4 in the scanning and tilting compared with the present standard test method. Therefore, the latter must be revised in order to consider the radiation pattern above 1 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.335-343
• /
• 2024

Real-time target signal processing techniques for FMCW LiDAR are described in this paper. FMCW LiDAR is gaining attention as the next-generation LiDAR for self-driving cars because of its detection robustness even in adverse environmental conditions such as rain, snow and fog etc. in addition to its long range measurement capability. The hardware architecture which is required for high-speed data acquisition, data transfer, and parallel signal processing for frequency-domain signal processing is described in this article. Fourier transformation of the acquired time-domain signal is implemented on FPGA in real time. The paper also details the C-FAR algorithm for ensuring robust target detection from the transformed target spectrum. This paper elaborates on enhancing frequency measurement resolution from the target spectrum and converting them into range and velocity data. The 3D image was generated and displayed using the 2D scanner position and target distance data. Real-time target signal processing and high-resolution image acquisition capability of FMCW LiDAR by using the proposed parallel signal processing algorithms based on FPGA architecture are verified in this paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.121-127
• /
• 2018

A system for diagnosing surface defects of long and large pipe inner overlay welds, 1m in diameter and 6m in length, was developed using a Liquid Penetrant Test (PT). First, CATIA was used to model all major units and PT machines in 3-dimensions. They were used for structural strength analysis and strain analysis, and to check the motion interference phenomenon of each unit to produce two-dimensional production drawings. Structural strength analysis and deformation analysis using the ANSYS results in a maximum equivalent stress of 44.901 MPa, which is less than the yield tensile strength of SS400 (200 MPa), a material of the PT Machine. An examination of the performance of the developed equipment revealed a maximum travel speed of 7.2 m/min., maximum rotational speed of 9 rpm, repeatable position accuracy of 1.2 mm, and inspection speed of $1.65m^2/min$. The results of the automatic PT-inspection system developed to check for surface defects, such as cracks, porosity, and undercut, were in accordance with the method of ASME SEC. V&VIII. In addition, the results of corrosion testing of the overlay weld layer in accordance with the ferric chloride fitting test by the method of ASME G48-11 indicated that the weight loss was $0.3g/m^2$, and met the specifications. Furthermore, the chemical composition of the overlay welds was analyzed according to the method described in ASTM A375-14, and all components met the specifications.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.9-16
• /
• 2006

Many image and video compression algorithms work by splitting the image into blocks and producing variable-length code bits for each block data. If variable-length code data are transmitted consecutively over error-prone channel without any error protection technique, the receiving decoder cannot decode the stream properly. So the standard image and video compression algorithms insert some redundant information into the stream to provide some protection against channel errors. One of redundancies is resynchronization marker, which enables the decoder to restart the decoding process from a known state in the event of transmission errors, but its usage should be restricted not to consume bandwidth too much. The Error Resilient Entropy Code(EREC) is well blown method which can regain synchronization without any redundant information. It can work with the overall prefix codes, which many image compression methods use. This paper proposes EREREC method to improve FEREC(Fast Error-Resilient Entropy Coding). It first calculates initial searching position according to bit lengths of consecutive blocks. Second, initial offset is decided using statistical distribution of long and short blocks, and initial offset can be adjusted to insure all offset sequence values can be used. The proposed EREREC algorithm can speed up the construction of FEREC slots, and can improve the compressed image quality in the event of transmission errors. The simulation result shows that the quality of transmitted image is enhanced about $0.3{\sim}3.5dB$ compared with the existing FEREC when random channel error happens.