• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.389-393
• /
• 2007

There has been many researches using LiDAR(Light Detection And Ranging) data. There has been many other researches through out the world using the 3 dimensional spatial data in various fields. In this research, Using lidar data and digital images, we have extracted the position of the power-transmission line and created 3 dimensional models. The presented method is more efficient than field surveying and it can also be used lot monitoring change in the environment

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.320-327
• /
• 2002

An experimental study of heat transfer from hot flat surface to water sprays was conducted in high temperature region. Heat transfer measurements for hot flat surface were made by 4 sheathed C-A thermocouples. Droplets volume flux were also measured-independently at a position in spray field. The test conditions included variations in droplets volume flux, subcooling of cooling water of $1.565\times10^{-3} to 14.089\times10^{-3}m^3/m^2s and 80 to $20^{\circ}C$ respectively. The effects of inclination angle on heat transfer were investigated and changes in inclination angle of hot flat surface affected heat transfer coefficients of high temperature region.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.104-106
• /
• 2005

In this paper, 3-dimensional magnetic field of coil is analyzed by using biot-sarvart law considering singularity. The RMSP(reduced magnetic scalar potential) arc employed in order to reduce the number of unknown variables in FEM(Finte Element Analysis) or BEM(Boundary Element Method). It Is necessary to calculate magnetic field of souce current when RMSP is used. Biot-savart law is generally used. it is difficult to calculate the field when the source point is in inside the coil. To integrate using gaussian quadrature, the cross section of coil is divided considering the position of field point when field point is inside coil. The proposed method shows good agreement of magnetic field compared with FEMLAB, OPERA3D.

• Journal of Periodontal and Implant Science
• /
• v.47 no.3
• /
• pp.154-164
• /
• 2017

Purpose: Measurement of the root surface area (RSA) is important in periodontal treatment and for the evaluation of periodontal disease as a risk factor for systemic disease. The aim of this study was to measure the RSA at 6 mm below the cementoenamel junction (CEJ) using the Mimics software (Materialise, Leuven, Belgium). Methods: We obtained cone-beam computed tomography (CBCT) data from 33 patients who had visited the Department of Oral and Maxillofacial Radiology of Dankook University Dental Hospital. The patients comprised 17 men and 16 women aged from 20 to 35 years, with a mean age of 24.4 years. Only morphologically intact teeth were included in our data. Because the third molars of the maxilla and mandible have a high deformation rate and were absent in some participants, they were not included in our research material. Results: The CBCT data were reconstructed into 3-dimensional (3D) teeth models using the Mimics software, and the RSA at 6 mm below the CEJ was separated and measured using 3-Matic (Materialise). In total, 924 3D teeth models were created, and the area at 6 mm below the CEJ could be isolated in all the models. The area at 6 mm below the CEJ was measured in all teeth from the 33 patients and compared based on sex and position (maxilla vs. mandible). Conclusions: In this study, we demonstrated that it was feasible to generate 3D data and to evaluate RSA values using CBCT and the Mimics software. These results provide deeper insights into the relationship between periodontal inflammatory burden and systemic diseases.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.173-186
• /
• 2020

In this paper, we design and implement a service system for mobile devices to utilize the integrated underground geospatial information map in underground exploration fields. The field utilization service system for mobile devices is designed to visualize tiled maps, 3D terrain information, underground structures, underground facilities, and ground information provided by the Integrated Underground Geospatial Information Map Management System according to current position. And It is designed to reflect the results obtained from field exploration in real time. Also, the proposed system is implemented to transfer and visualize the integrated underground geospatial information map in the form of a glTF format due to constraints on wireless networks and device characteristics of mobile devices. Implemented mobile service systems can prevent accidents in underground exploration field from occurring by providing users with accurate and integrated underground geospatial data by visualizing maps and geospatial objects in three dimensions at underground exploration fields. In addition, updated underground geospatial data is transmitted in real time to the Integrated Underground Geospatial Information Map Management Systems, which can maintain up to date and accuracy.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.31-40
• /
• 1975

A study on public health education curriculums of 14 universities located in Seoul city was carried out from Oct. 15 1974 to Nov. 15 1974. The data were obtained from 11 universities bulletins & 3 universities administration officers. The contentments of public health were obtained by the interview with the teaching professors on the syllabuses. The results were as follows: 1. General Public health topics were taught at 4 universities (28.6%) out of 14 universities & 129 departments (25.3%) out of 509 departments. General public health education were taught at 2 universities (28.6%) out of 7 universities with medical school of the colleges of education 2 collages (18.2%) had the public health education in the curriculums. 2. Academic administration of Public health education by universities 2 hrs for 2 credits were allocated at 2 universities (50%), while 4 hrs for 2 credits at the rest universities (50% ), Pubic health education were taught as an essential general education at 4 universities. Public health education were taught in freshman course at 2 universities in senior course at 2 other universities. Text books on public health education were chosen at 2 universities and at other 2 universities, just references were introduced to students. Contents of public health education. In two universities teaching programs of public health were undertaken & in other two universities no particular leaching programs were undertaken. And contents of tuberculosis, V. D. & communicable disease control Pregnancy & delivery, precaution ok post paestum maternal & child health were taught at 4 universities. Contents of health & college students, alcohol tobacco & coffee, chosen of sports were taught at few university. 3. General public health education instructors: The instructors were consisted of 13 men(81.2%) & 3 women (18.8%) Physicians were 11 (68.8%), nurses 2 (12.5%) & others 3(18.7%) Full time instructors were 7 (43.7%) part time instructors 9 (56.3%) Position & organization instructors belong to ; instructors (75.0%) had the teaching position in universities & research workers & others were 3 (18.8%) & medical practitioner was I(6.2%) 4. Public health & home nursing education by general home economic departments. Home nursing & public health were taught as an compulsory general education program in 10 departments 50.5% & as an alternative major course in 7 departments (35.0%) 2 hrs for 2 credits were allocated at 9 departments (45.0%) while eve. 4hrs for 4credits were 8 departments (40.0%).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.79-88
• /
• 2022

In order to develop a bodice prototype suitable for obese women in their 20s, this study compared and analyzed a total of five pattern system methods, including prototype of France and Japan, one prototype for education in Korea and two prototype for industries in Korea. Through this, this study attempted to investigate the bodice pattern system suitable for the development of plus-size women's clothing. For the pattern drafting, pattern 1 was applied with the most body dimensions such as interscye fold front, interscye fold back, bust circumference, neck circumference, and waist back length, and pattern 2, pattern 4, and pattern 5 were made based on bust circumference and waist back length. As a result of the appearance evaluation, Pattern 3 was evaluated as the best pattern in all items except for the suitability of the center front length and the suitability of the side waist circumference position. However, it was evaluated as inappropriate in items such as the vertical side line, the suitability of the side waist circumference line position, the suitability of interscye fold back position and shape, and the suitability of the back shoulder dart position. Most of the pattern drafting methods are based on the size of the bust circumference, but other institutional methods are considered necessary when setting the neck circumference and shoulder length for 20s obesity women. In addition, it is also required to develop a method for setting the front center length due to abdominal protrusion.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1259-1268
• /
• 2004

To organize training in limited training area for an actuai combat, realistic training simulation plugged in by various battle conditions is essential. In this paper, we propose a virtual target overlay technique which does not use a virtual image, but Projects a virtual target on ground-based CCD image by appointed scenario for a realistic training simulation. In the proposed method, we create a realistic 3D model (for an instructor) by using high resolution Geographic Tag Image File Format(GeoTIFF) satellite image and Digital Terrain Elevation Data (DTED), and extract the road area from a given CCD image (for both an instructor and a trainee). Satellite images and ground-based sensor images have many differences in observation position, resolution, and scale, thus yielding many difficulties in feature-based matching. Hence, we propose a moving synchronization technique that projects the target on the sensor image according to the marked moving path on 3D satellite image by applying Thin-Plate Spline(TPS) interpolation function, which is an image warping function, on the two given sets of corresponding control point pair. To show the experimental result of the proposed method, we employed two Pentium4 1.8MHz personal computer systems equipped with 512MBs of RAM, and the satellite and sensor images of Daejoen area are also been utilized. The experimental result revealed the effective-ness of proposed algorithm.