• 한국해안·해양공학회논문집
• /
• 제21권1호
• /
• pp.45-53
• /
• 2009

RNG $k-{\varepsilon}$ 난류모형이 포함된 3차원 동수역학 수치모형(FLOW-$3D^{(R)}$)을 사용하여 수조 수치실험을 통한 항력계수 산정 가능성을 검토하였다. 물리적 실험으로 항력계수가 알려져 있는 말뚝구조물에 대하여, 사각형 말뚝구조물의 수치해에 의한 항력계수값이 $1.34{\sim}1.52$로 물리적 실험값인 $1.3{\sim}1.5$의 범위와 매우 유사한 결과를 보였다. 원형 말뚝구조물은 0.5$0.75{\sim}0.78$ 정도로서 물리적 실험치와 비교적 잘 일치하였다. 그리고 항력계수값이 알려지지 않은 열을 이룬 말뚝구조물의 경우 항력계수값은 구조물 간의 간섭으로 단일 구조물에 비해 항력계수가 크게 나타났으며, 각 구조물간의 거리비가 작아짐에 따라 구조물이 받는 항력계수값은 증가하는 양상을 보였다.

• Structural Engineering and Mechanics
• /
• 제48권5호
• /
• pp.587-613
• /
• 2013

A 3-node 3D co-rotational beam element using vectorial rotational variables is employed to consider the geometric nonlinearity in 3D space. To account for shape versatility and reinforced concrete cross-sections, fibre model has been derived and conducted. Numerical integration over the cross-section is performed, considering both normal and shear stresses. In addition, the derivations associated with material nonlinearity are given in terms of elasto-plastic incremental stress-strain relationship for both steel and concrete. Steel reinforcement is treated as elasto-plastic material with Von Mises yield criterion. Compressive concrete behaviour is described by Modified Kent and Park model, while tensile stiffening effect is taken into account as well. Through several numerical examples, it is shown that the proposed 3D co-rotational beam element with fibre model can be used to simulate steel and reinforced concrete framed structures with satisfactory accuracy and efficiency.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1105-1119
• /
• 2016

In this study, it is presented that a new developed approach for equivalent area-distributed loading (EADL) induced from a single concentrated force. For the purpose, a full scale 3D steel formwork system was constructed in laboratory conditions. A developed load transmission platform was put on the formwork system and loaded step by step on the mass center. After each load increment, displacement was measured in several crictical points of the system. The developed platform which was put in to slab of formwork to equivalently distribute the load from a point to the whole slab was constituted using I profiles. A 3D finite element model of the formwork system was analyzed to compare numerical displacement results with experimental ones. In experimental tests,difference among the displacements obtained from reference numerical model (model applied EADL) and main numerical model (model applied single load using a load cell via load transmission platform) is about %13 in avarage. Difference among the displacements obtained from experimental results and main numerical model under 30 kN single load is about %11 in avarage. The results revealed that the displacements obtained experimentally and numerically are dramatically closed to each other. It is highlighted from the study that the developed approach is reliable and useful to get EDL.

• 설비공학논문집
• /
• 제25권10호
• /
• pp.562-567
• /
• 2013

1D-numerical analysis of the network algorithm with the orifice equation for the relationship between pressure difference and flowrate has been mostly used to analyse leakage flow at the gap. In this study, a 3D-numerical method applying momentum loss model to the gap region in the computational domain is represented to reflect effectively the effect of leakage flow by determining the proportion of pressure difference to air passage velocity. While the 3D-numerical method is verified through the computation of the two compartments model, the numerical analysis of the stack effect in a building stairway is performed. As the temperature of air outside drops, the pressure in the upper stairway and leakage flowrate through the gap in the door rise. The change of gap area does not have an effect on pressure in the stairway for the analysis conditions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1064-1081
• /
• 2014

This paper presents a numerical analysis of slamming and whipping using a fully coupled hydroelastic model. The coupled model uses a 3-D Rankine panel method, a 1-D or 3-D finite element method, and a 2-D Generalized Wagner Model (GWM), which are strongly coupled in time domain. First, the GWM is validated against results of a free drop test of wedges. Second, the fully coupled method is validated against model test results for a 10,000 twenty-foot equivalent unit (TEU) containership. Slamming pressures and whipping responses to regular waves are compared. A spatial distribution of local slamming forces is measured using 14 force sensors in the model test, and it is compared with the integration of the pressure distribution by the computation. Furthermore, the pressure is decomposed into the added mass, impact, and hydrostatic components, in the computational results. The validity and characteristics of the numerical model are discussed.

• 한국수자원학회논문집
• /
• 제38권3호
• /
• pp.179-188
• /
• 2005

본 연구에서는 화북다목적댐을 대상으로 2차원, 3차원 수치모형실험이 수리모형실험과 더불어 설계자에게 유용한 해석도구로 사용될 수 있음을 보였다. 2차원, 3차원 수치모형으로 천수방정식을 지배방정식으로 하는 RMA2와 RANS를 지배방정식으로 하는 FLOW-3D 모형을 이용하였다. 수몰지역과 접근수로에서의 유황, 월류웨어의 방류능력, 월류부, 도류부, 감세지에서의 수면형상, 월류부에서의 압력분포에 대한 수치모의 결과를 수리모형실험 결과와 비교하였다. 비교 결과, 대부분의 경우에 수치모의 결과는 수리모형실험 결과를 잘 재현하는 것으로 나타났다 그러나, 감세지에서의 도수현상에 대한 수치모의 결과는 공기연행효과로 인해 수리모형실험 결과와 다소 차이가 발생하는 것으로 나타났다.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.293-298
• /
• 2016

A three-dimensional (3D) numerical model of the vertical ground-coupled heat exchanger is useful for analyzing the modern ground source heat pump system. Furthermore, a detailed description of the inner side of the exchanger allows to account for the effects of the thermal capacity. Thus, both methods are included in the proposed numerical model. For the ground portion, a FDM (Finite Difference Method) scheme has been applied using the Cartesian coordinate system. Cylindrical grids are applied for the borehole portion, and the U-tube configuration is adjusted at the grid, keeping the area and distance unchanged. Two sub-models are numerically coupled at each time-step using an iterative method for convergence. The model is validated by a reference 3D model under a continuous heat injection case. The results from a periodic heat injection input show that the proposed thermal capacity model reacts more slowly to the changes, resulting in lower borehole wall temperatures, when compared with a thermal resistance model. This implies that thermal capacity effects may be important factors for system controls.

• 한국수자원학회논문집
• /
• 제36권5호
• /
• pp.761-776
• /
• 2003

본 연구에서는 사류 및 부압이 발생하는 자유수면을 가진 댐 상류 및 여수로에서 물의 흐름의 동수역학적인 거동을 파악하기 위하여 수치모형을 적용하였다. 댐 건설시, 댐 상류에서의 유동을 알아보기 위하여 2차원 수치모형인 RMA2를 이용하였고, 접근부에서의 3차원적 흐름과 여수로, 방류관 등에서의 흐름분포를 평가하기 위하여 3차원 CFD 프로그램인 FLUENT를 사용하였다. 수치모의에서는 지형 및 구조물에 관한 세부인자들이 수치모형을 구성하는 데 사용되었다. 한탄강 댐에 적용한 2차원 수치모의 결과, 댐 상류부 여러 지점에서 최대 유속이 1 m/s에 이르는 와류가 발생하는 것을 확인할 수 있었다. 이는 2차원 수치모형이 댐 건설 후 상류하천의 2차원적 유황을 규명하는 데 유용하게 활용될 수 있음을 의미한다. 3차원 수치모의 결과, 수위와 방류조건에 따라서 댐 직상류의 3차원 접근 흐름의 변화가 발생하고 있으며, 여수로, 방류관, 배사관으로 배출되는 유속이 상이하게 나타나고 있음이 밝혀졌다. 댐 상류 100 m지점에서 댐 여수로 중심선에 대한 유속 분포 모의치를 수리모형실험에서의 측정치와 비교한 결과, 두 값이 비슷하게 나타났다. 본 연구 결과, 2, 3 차원 수치모형이 댐 상류부 및 여수로의 흐름을 해석하는 데 있어서 수리모형실험에서 쉽게 수행하기 어려운 다양한 조건을 모의함으로써 댐 설계 최적화에 기여할 수 있으리라 판단된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.457-460
• /
• 2006

This study is to investigate the variation characteristics of run-up height over sandy beach due to the plane distribution of submerged breakwaters. In this study, Three-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly WAve Structure Seabed interaction (hereafter, LES-WASS-3D) has been newly developed. A comparison between the numerical model and existing experimental results was made to verify accuracy of newly proposed LES-WASS-3D model, and showed fairly nice agreement. In addition, based on the LES-WASS-3D model, the variation characteristics of run-up height over sandy beach are discussed with relation to the offshore distance and opening width of submerged breakwaters.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.89-94
• /
• 2016

This study is part of three-dimensional(3D) heat transfer analysis program developmental process. The program is being developed without it's own built in 3D-modeller. So 3D-model must be created from another 3D-modeller such as generic CAD programs and imported to the developed program. After that, according to the 3D-geometric data form imported model, 3D-mesh created for numerical calculation. But the 3D-model created from another 3D-modeller is likely to have errors in it's geometric data such as mismatch of position between vertexes or surfaces. these errors make it difficult to create 3D-mesh for calculation. These errors are must be detected and cured in the pre-process before creating 3D-mesh. So, in this study four kinds of filters and functions are developed and tested. Firstly, 'vertex error filter' is developed for detecting and curing for position data errors between vertexes. Secondly, 'normal vector error filter' is developed for errors of surface's normal vector in 3D-model. Thirdly, 'intersection filter' is developed for extracting and creating intersection surface between adjacent objects. fourthly, 'polygon-line filter' is developed for indicating outlines of object in 3D-model. the developed filters and functions were tested on several shapes of 3D-models. and confirmed applicability. these developed filters and functions will be applied to the developed program and tested and modified continuously for less errors and more accuracy.