• Journal of the Korean housing association
• /
• v.25 no.5
• /
• pp.43-50
• /
• 2014

This study assesses thermal environment of detached housing area by classifying buildings types with codes based on spatial characteristics and forms of the detached housing area and applying heat island alleviation measures, especially focused on FBCs (Form-Based Codes). We analyzed shapes and materials of outdoor space with 3D-CAD, which can affect the surface temperature of the case studies, focusing on heat island alleviation measures, and performed space design by applying relevant climate factors to a simulation. As to the 3D surface temperature and HIP distribution, low-temperature distribution was shown in the case studies when we applied heat island alleviation measures. FBCs (Form- Based Codes) is being developed for the purpose of creating new urban environment. This study is significant because it pays attention to the effects of surface temperatures on accumulation of sensible heat and reviews heat island alleviation measures with outdoor space shapes/materials in order to lower surface temperatures, aiming at improved pleasantness of the detached housing area.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.45-50
• /
• 2007

objectives: We investigated the moisturizing and cooling effects of the cosmetic product with Scrophularia Buergeriana, Poria Cocos, Lonicera Japonica, Portulaca Oleracea and Ginko Biloba extract on human skin by using non-invasive instrument. Methods: We measured physiological effects after volunteers(female, n=5) applied the cosmetic product containing the extract of oriental herbs. The forearm skin moisturization was measured with $Corneometer^{\circledR}$ CM825 after 15min, 3hr, and 6hr. The forearm skin surface roughness was with Scanning electron microscopy after 15min, and 6hr. The face skin temperatures cooling and microcirculation effects were measured with ThermaCAMTM PM525 and LDl-Periscan PlM II after 15min, and 30min. Results: The forearm skin moisturization was imcreased 108% after 15min. The forearm skin surface roughness was decreased significantly after 15min. The face skin temperatures were cooling down to $30.7^{\circ}C$. The face skin microcirculation effect was normalized time-dependently. Conclusions: We concluded that cosmetic product containing the extract of Scrophularia Buergeriana, Poria Cocos, Lonicera Japonica, Portulaca Oleracea and Ginko Biloba had a moisturization effect and improving the surface roughness, temperature and microcirculation on the human skin.

• Corrosion Science and Technology
• /
• v.20 no.4
• /
• pp.196-203
• /
• 2021

To improve corrosion resistance and reduce the hydrogen uptake of 22MnB5, up to 5% Mg was added to the AlSi coating of 22MnB5. After hot-stamping and electrocoating were done on the metallic-coated specimen, the surface characteristics of the steel, hydrogen uptake content, and corrosion resistance were examined by transmittance electron microscopy, thermal desorption spectrometry, cyclic corrosion testing, and electrochemical impedance spectroscopy. Mg was investigated as MgO on the surface layer after hot-stamping while it existed as Mg₂Si before hot-stamping. The total hydrogen content of 22MnB5 was decreased along with the Mg content. However, there was no difference at 0.2 wt% or more. When a small amount of Mg was added, the coating corrosion resistance was decreased, but when it was added at around 1.0 wt%, the greatest corrosion resistance increase was seen. However, when 3 wt% or more was added excessively, the corrosion resistance was decreased. MgO on the surface was considered to suppress H uptake by the AlSi melting solution and increase the barrier effect of the coating.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.4
• /
• pp.399-404
• /
• 2013

The rotor overhang is used to enhance air-gap flux and improve power density. Due to asymmetry in the axial direction caused by the overhang, the time consuming 3D analysis is necessary to design the motor with overhang. To solve this problem, this paper proposes the equivalent magnetic circuit model (EMCM) that can consider overhang effects without the 3D analysis by using effective air-gap length. The analysis time can be reduced significantly via the proposed EMCM. The reduction of the analysis time is essential for the preliminary design of the motor. In order to verify the proposed model, the 3-D finite-element method (FEM) analysis is adopted. 3-D FEM results confirm the validity of the proposed EMCM.

• Journal of computational fluids engineering
• /
• v.4 no.3
• /
• pp.1-11
• /
• 1999

This paper describes the flow field analysis of an automobile with crosswind effects of 15°, 30° 45° and 60° of yaw angles. The governing equations of the 3-D incompressible Navier-Stokes equations are solved by the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror. The computated surface pressure coefficients have been compared with experimental results and a good agreement has been achieved. The A- and C-pillar vortex and other flow phenomena around the ground vehicle are evidently shown. The variation of aerodynamic coefficients of drag, lift, side force and moments with respect to yaw angle is systematically studied.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.3
• /
• pp.407-414
• /
• 2015

The effect of activated carbon particle diameter (i.e. US sieve No. $8{\times}10$ ($d_p{\approx}2.19mm$), $18{\times}20$ ($d_p{\approx}0.92mm$), $50{\times}60$ ($d_p{\approx}0.27mm$) and $170{\times}200$ ($d_p{\approx}0.081mm$) on caffeine adsorption is investigated. BET surface area was increased with decreasing particle diameter ($d_p$), and caffeine adsorption rates increased with decreasing $d_p$. Moreover, pseudo-second order model is predicted the experimental data more accurately than pseudo-first order model, and the fastest rate constant ($k_2$) was $1.7g\;mg^{-1}min^{-1}$ when $d_p$ was 0.081 mm. Surface diffusion coefficient (Ds) was decreased with decreasing $d_p$ based on the minimum sum of square error (SSE). Practically, certain ranges of Ds are acceptable with high reliability ($R^2$) and it is determined that the effect of $d_p$ on Ds is unclear. The effect of pH on caffeine adsorption indicated the dependency of m/L ratio (mass liquid ratio) and $pH_{pzc}$. The $pH_{pzc}$ (i.e. $7.9{\pm}0.2$) was not affected by $d_p$. The higher caffeine adsorption at pH 4 and pH 7 than at pH 10 is due to $pH_{pzc}$, not $pk_a$ of caffeine.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.331-336
• /
• 2010

The free surface influenced the wake behind a circular cylinder and its effects were investigated experimentally in a circulating water channel with the variation of water depth. Instantaneous velocity fields were measured in this paper. The measured results has been compared with each other to investigate the flow characteristics of the circular cylinder's 2-dimensional section at $Re=1.0{\times}10^3$ using 2-frame grey level cross correlation PIV method. The flow around the circular cylinder with free surface affected the wake structure. Especially, in case of d=1.0D, the boundary layer was measured in the whole area. The separation point and boundary layer of the circular cylinder could be controlled by the water depth.

• Restorative Dentistry and Endodontics
• /
• v.49 no.3
• /
• pp.30.1-30.12
• /
• 2024

Objectives: The aim of the current study was to evaluate the effect of polishing systems and surface sealant on the color stability and whiteness index of single-shade resin composites after staining and bleaching. Materials and Methods: Three single-shade (Omnichroma, Charisma Diamond One, Zenchroma) and one multi-shade (Filtek Z250) materials were tested. From each resin composite, 40 specimens were prepared. The specimens were divided into 4 subgroups (n = 10) according to the surface treatments: 1-step polishing, 1-step + Biscover LV, 2-step polishing, and 2-step polishing + Biscover LV. Color differences (ΔE₀₀) were calculated after being immersed in the coffee solution for 12 days. After the staining, the specimens were immersed in a whitening mouthrinse (Crest-3D White) for 12 hours. Whiteness index differences (ΔWI_D = WI_D after staining - WI_D after bleaching) values were recorded. The generalized linear model was used for analysis (p< 0.05). Results: The lowest and highest ΔE₀₀ values were found for Zenchroma and Charisma Diamond One respectively. Sealed groups indicated higher ΔE₀₀ values than nonsealed groups with significant differences (p = 0.008). The lowest and highest ΔWI_D values were found for Zenchroma and Charisma Diamond One respectively. Sealed groups indicated lower ΔWI_D values than nonsealed groups with significant differences (p = 0.022). Conclusions: The use of surface sealant increased the discoloration and showed less whiteness change in resin materials. When the 1-step was compared with the 2-step polishing, the effects on the color stability and whiteness index values of the resin materials were similar.

• Journal of Korea Foundry Society
• /
• v.37 no.3
• /
• pp.63-70
• /
• 2017

In the present study, effects of an addition of Sn on the microstructure and corrosion behavior were investigated in Mg-4%Zn-(0-3)%Sn casting alloys. With an increase in the Sn content, the ${\alpha}-(Mg)$ dendritic cell size was reduced, whereas the total amount of precipitates increased due to the formation of the $Mg_2Sn$ phase. It was found in immersion and electrochemical corrosion tests that the addition of Sn has a detrimental effect on the corrosion resistance of the Mg-4%Zn alloy. Microstructural examinations of the corrosion product and the corroded surface indicated that an accelerated micro-galvanic effect by the $Mg_2Sn-phase$ particles and a less protective corrosion product on the surface were responsible for the increased corrosion rate at a higher Sn content.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.107-121
• /
• 2018

This study investigates the effects of the Kano model on the product quality and quality satisfaction on the FDM low cost 3D printer, which is used by consumer and makers. 3D printer product quality is analyzed in terms of functionality, usability, durability, reliability and safety based on the inherent quality of the product itself. This study were tested using Kano analysis to calculate the product detail characteristics and Timko coefficient to calculate the degree of satisfactory effects of the 3D printer. As a result, this study becomes product size, the output speed, durability against external impact as attractive quality and the safety part is regarded as One-dimensional quality. With the exception of surface resolution, the Timko customer satisfaction index was the same as the Kano model.