• Structural Engineering and Mechanics
• /
• 제84권6호
• /
• pp.743-765
• /
• 2022

Near-surface excavations may cause the tilting and destruction of the adjacent superstructures in big cities. The stability of a huge excavation and its nearby superstructures was studied in this paper. Some test instruments monitored the deformation and loads at the designed location. Then the numerical models of the excavation were made in FLAC3D (a three-dimensional finite difference code) and Plaxis-3D (a three-dimensional finite element code). The effects of different supporting and reinforcement tools such as nails, piles, and shotcretes on the stability and bearing capacity of the foundation were analyzed through different numerical models. The numerically approximated results were compared with the corresponding in-field monitored results and reasonable compatibility was obtained. It was concluded that the displacement in excavation and the settlement of the nearby superstructure increases gradually as the depth of excavation rises. The effects of support and reinforcements were also observed and modeled in this study. The settlement of the structure gradually decreased as the supports were installed. These analyses showed that the pile significantly increased the bearing capacity and decreased the settlement of the superstructure. As a whole, the monitoring and numerical simulation results were in good consistency with one another in this practically important project.

• Computers and Concrete
• /
• 제4권2호
• /
• pp.135-156
• /
• 2007

Three 3D nonlinear finite-element models are developed to study the behavior of concrete beams and plates with and without external reinforcement by fibre-reinforced plastic (FRP). All three models are formulated based upon the 3D theory of elasticity. The stress model is modified from the element developed by Ramtekkar, et al. (2002) to incorporate material nonlinearity in the formulation. Both transverse stress and displacement components are used as nodal degrees-of-freedom to ensure the continuity of both stress and displacement components between the elements. The displacement model uses only displacement components as nodal degrees-of-freedom. The transition model has both stress and displacement components as nodal degrees-of-freedom on one surface, and only displacement components as nodal degrees-of-freedom on the opposite surface. The transition model serves as a connector between the stress and the displacement models. The developed models are validated by comparing the results of the analyses with an existing experimental result. Parametric studies of the effects of the externally reinforced FRP on the load capacity of reinforced concrete (RC) beams and concrete plates are performed to demonstrate the practicality and the efficiency of the proposed models.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.209-213
• /
• 2006

The ring-opening polymerization of D,L-lactide initiated by tin(II) 2-ethylhexanoate $(Sn(Oct)_2)$ on the surface-initiated magnetite $(Fe_{3}O_4)$ nanoparticles was performed at $130^{\circ}C$. The effects of the polymer molar mass and concentration on the amount of surface polymer were investigated. The number average molecular weights, $M_n$, obtained by both NMR and GPC methods fit well within the accuracy of the applied methods and ranged from 1,100 to $4,040g\;mol^{-1}$. A surface functionalization density of up to 625 initiation sites per particle was obtained. The composition of various core-shell particles was determined by TGA, with results indicating magnetite $(Fe_{3}O_4)$ contents, ${\mu}m$, between 17 and 59 wt%. Under the influence of a magnetic field, the heating generated by superparamagnetic core-shell particles suspended in toluene presented guidelines for an optimization of magnetic particle systems with respect to an application for hyperthermia.

• Integrative Medicine Research
• /
• 제6권4호
• /
• pp.388-394
• /
• 2017

Background: The present study optimized ultrasound-assisted extraction conditions to maximize extraction yields of glycyrrhizic acid from licorice. Methods: The optimal extraction temperature ($X_1$), extraction time ($X_2$), and methanol concentration ($X_3$) were identified using response surface methodology (RSM). A central composite design (CCD) was used for experimental design and analysis of the results to obtain the optimal processing parameters. Results: Statistical analyses revealed that three variables and the quadratic of $X_1$, $X_2$, and $X_3$ had significant effects on the yields and were followed by significant interaction effects between the variables of $X_2$ and $X_3$ (p<0.01). A 3D response surface plot and contour plots derived from the mathematical models were applied to determine the optimal conditions. The optimum ultrasound-assisted extraction conditions were as follows: extraction temperature, $69^{\circ}C$; extraction time, 34?min; and methanol concentration, 57%. Under these conditions, the experimental yield of glycyrrhizic acid was 3.414%, which agreed closely with the predicted value (3.406%). Conclusion: The experimental values agreed with those predicted by RSM models, thus indicating the suitability of the model employed and the success of RSM in optimizing the extraction conditions.

• 한국표면공학회지
• /
• 제56권1호
• /
• pp.94-103
• /
• 2023

The effects of carburizing pressure and gas ratio on vacuum carburizing properties (uniformity and surface characteristics) have been studied through the analyses of carbon concentration, hardness, surface color, surface roughness and type of carbon bonding. AISI 4115 steel specimens were carburized with various pressures (1, 5, and 10 Torr) at different locations (P₁, P₂, P₃, P₄, P₅, and P₆) inside a furnace held at 950 ℃. Since the carburizing pressure represents the density of the carburizing gas, it plays an important role in improving the carburizing uniformity according to locations in the furnace. As the carburizing pressure increased, the carburizing uniformity according to the sample location was improved, but the surface of the carburized specimen was discolored due to the residual acetylene gas, which does not contribute to the carburizing reaction. Therefore, the carburizing uniformity and surface discoloration have been improved by injecting acetylene gas (carburizing gas) and nitrogen gas (non-reactive gas) in a specific ratio.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.542-545
• /
• 1990

Texture provides an important source of information about the local orientation of visible surfaces. In this study the 3D shape of a textured surface is recovered from its perspective projection image on the assumption that the texture is homogeneously distributed. To recover 3D structure, the distorting effects of the perspective projection must be distinguished from properties of the texture. In this study, paraperspective projection, approximation of perspective projection, has employed.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.443-452
• /
• 1994

This study describes the effects of novel1, 25-dihydroxyvitamin D$_3$ analong[1,25(OH)$_2$-16ene-23yne-26, 27-F6-D$_3$] on proliferation of the human histiocytic lymphoma cell line U937 in vitro. We also examined the expression of c-myc oncogene in U937 cells was apparently inhibited to 62% and 87% of the control level after 4 days in the presence of 10-8M and 10-7 M of this analog, respectively. This compound morpholgically and functionally differentiated U937 cells to nonocyte-macrophage phenotype showing the increase of adherence ability to surface and a decrease of N/C ratio in Giemsa staining . Especially, nonspecific esterase activity which is a marker of cell differentiation to monocyte-macrophage was positive, and production of the positive stained cells increased in a dose dependent fashion . The expression of c-myc oncogene by 1, 25(OH)$_2$D$_3$ analog(10-7 M) was reduced by 60% at the mRNA level as determined by Northern blotting. The effects of this novel analog on cell proliferation and cell differentiation may open op new therapeutic strategies for human disorders such as psoriassis and may provide a tool to understand the mechanism of action of vitamin D$_3$ seco-steroids in malignancy.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권3호
• /
• pp.116-121
• /
• 2005

본 연구에서는 자유표면을 갖는 대규모의 환경유동의 해를 구하는데 있어 비정수압의 효과를 고려하는 새로운 계산 기법을 제시하였다. Sigma 좌표계에서 시간은 전진차분으로, 공간은 중간차분 및 풍상차분을 혼합하여 2단계 해법을 도입하였다. 계산기법의 타당성과 유효성을 검증하기 위하여, 자유표면을 갖는 정상유동과 비정상유동에 대한 전형적인 예를 설정하여 정수압 계산과 비정수압 계산을 수행하고 이들을 비교하였다. 계산결과 복잡한 해저지형을 갖는 자유표면 유동에 있어, 지정수압효과가 무시할 수 없는 유동영역이 존재함이 입증되었으며, MAC기법과 같은 3차원 유체동역학적 기법을 적용하기에는 비경제적인 문제에 대해 본 계산기법이 매우 유효하게 적용될 수 있다는 가능성이 입증되었다.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.25-32
• /
• 2016

지반공학에서 평면변형율을 가정하는 2차원 사면안정해석은 일반적으로 널리 사용되고 있다. 이 가정은 사면활동이 넓은 영역에 걸쳐서 발생되는 가정이므로 3차원 효과가 무시된다. 대다수 연구에서 2차원해석의 최소안전율값은 3차원해석에 비하여 작게 평가되는 보수적인 결과를 나타낸다. 최근에는 컴퓨터의 소프트웨어와 하드웨어를 포함한 해석방법의 발달로 3차원해석에 대한 요구가 커지고 있다. 본 논문에서는 원호모드, 병진모드사면을 이용하여 유한요소에 의한 2, 3차원해석 및 2차원 한계평형해석을 통하여 수치해석을 실시하였다. 해석결과 매개변수(요소망크기, 체적팽창각(dilatency angle), 경계조건, 응력이력, 모델차원)에 따른 사면안정해석에 미치는 영향을 분석하였다. 해석결과 2차원 해석보다 3차원 해석에 의한 사면의 안전율 값은 항상 크게 평가되며, W 뱡향 경계조건이 롤러지지인 경우, 사면폭에 의한 결과 차이는 없는 것으로 조사되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.216-224
• /
• 2011

In This study develops a quasi-three dimensional numerical model of wave driven coastal currents with accounting the effects of the wave-current interaction and the surface rollers. In the wave model, the current effects on wave breaking and energy dissipation are taken into account as well as the wave diffraction effect. The surface roller associated with wave breaking was modeled based on a modification of the equations by Dally and Brown (1995) and Larson and Kraus (2002). Furthermore, the quasi-three dimensional model, which based on Navier-Stokes equations, was modified in association with the surface roller effect, and solved using frictional step method. The model was validated by data sets obtained during experiments on the Large Scale Sediment Transport Facility (LSTF) basin and the Hazaki Oceanographical Research Station (HORS). Then, a model test against detached breakwater was carried out to investigate the performance of the model around coastal structures. Finally, the model was applied to Akasaki port to verify the hydrodynamics around coastal structures. Good agreements between computations and measurements were obtained with regard to the cross-shore variation in waves and currents in nearshore and surf zone.