• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.319-330
• /
• 2016

3D 프린팅 기술은 다양한 산업분야에서 개념모델 및 기능성 시제품을 제작하는데 많이 응용되고 있지만, 3D 프린팅 소재 및 제작된 제품 신뢰성 등의 여러 가지 이유로 상용화 제품으로 적용되는 데 한계가 존재한다. 본 논문에서는 3D 프린팅 기술을 이용한 산업적 응용분야 중 하나로 발전소 저탄장에 사용되는 풀 코드 스위치 모듈의 부품들 중 잦은 돌발 상황으로 인해 파손이 자주 발생하는 허브 구동부와 레버 고정부 부품들에 대해 현장에서 작업자들이 단기 대체부품으로 적용이 가능하도록 하는 부품 최적 설계 및 FDM 방식 3D 프린팅 제조공정기술에 대한 연구결과를 제시하였다. 3D 프린팅 기술의 경우 소재 적용에 있어서 한계가 존재하므로, 본 논문에서는 구조 최적화 설계를 통해 구조 안정성을 확보하는 방안에 대해 연구를 수행하였다. 허브 구동부 부품에 대해 내부 구조 형상 및 구조 설계 변수 최적화를 수행하여 좌측구동모드에서는 안전계수가 153.67% 증가한 1.243을 확보할 수 있었으며, 우측구동모드에서는 404.96% 증가한 3.156을 확보할 수 있었다. 레버 고정부 부품의 경우, 반복적인 스위칭 구동에 의한 굽힘 모멘트로 인해 발생하는 파손을 최소화하기 위해 구조 최적화 설계를 수행하여 26% 증가한 구조 안전계수(7.52)를 확보할 수 있었다. 본 연구를 통해 3D 프린팅 기술을 단기 대체부품 제조공정에 적용함에 있어서 소재 최적화를 통한 설계보다는 3D 프린팅 공정의 적층특성을 활용한 구조적 최적화 설계기법 이 더욱 유연한 결과를 도출할 수 있음을 확인할 수 있었다.

• 통합자연과학논문집
• /
• 제4권3호
• /
• pp.202-209
• /
• 2011

Tuberculosis is a major health problem in humans because of its multidrug resistance and discovering new treatments for this disease is urgently required. The synthesis of isoprenoids in Mycobacterium tuberculosis has been reported as an interesting pathway to target. In this context, 2C-methyl-D-erythritol 4-phosphate (MEP) pathway of M. tuberculosis has drawn attention. The MEP pathway begins with the condensation of glyceraldehyde 3-phosphate and pyruvate forming 1-deoxy-D-xylulose 5-phosphate (DXP) which is catalyzed by 1-deoxy-D-xylulose 5-phosphate synthase (DXS). As there is no X-ray structure was reported for this target, comparative modeling was used to generate the three dimensional structure. The structure was further validated by PROCHECK, VERIFY-3D, PROSA, ERRAT and WHATIF. Molecular docking studies was performed with the substrate (Thiamine pyrophosphate) and the reported inhibitor 2-methyl-3-(4-fluorophenyl)-5-(4-methoxy-phenyl)-4H-pyrazolol[1,5-a]pyrimidin-7-one) against the developed model to identify the crucial residues in the active site. This study may further be useful to provide structure based drug design.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.183-192
• /
• 2014

For the structure determination of D-(+)-sucrose, which consists of ${\alpha}$-D-(+)-glucose and ${\beta}$-D-(+)-fructose, it was acetylated with acetic anhydride and triethyl amine, pyridine, zinc chloride, and sodium acetate as catalysts. The acetylated D-(+)-sucrose was acid-hydrolyzed using sulfuric acid and sodium chloride in methanolic solution. The structures of the reaction products were determined by $^1H$-NMR and $^{13}C$-NMR spectra. The yield of the acetylation indicated the high value in zinc chloride as 70% in zinc chloride catalyst. The acid-hydrolyzed product of the acetylated D-(+)-sucrose, 2,3,4,6,1',3',4',6'-octa-O-acetyl-D-(+)-sucrose, gave 2,3,4,6-tetra-O-acetyl-${\beta}$-D-(+)-glucose and it suggests that the acetylated D-(+)-sucrose was rearranged through the formation of oxonium ion by mutarotation in the 2,3,4,6-tetra-O-acetyl-${\alpha}$-D-(+)-glucose moiety and through the ring opening in the 1',3',4',6'-tetra-O-acetyl-${\beta}$-D-(+)-fructose moiety.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1574-1579
• /
• 2004

A simultaneous measurement system that can analyze the flow-structure interactions(FSI) has been constructed and analyses on the flow field and the motion field of a floating cylinder was made. The three-dimensional vector fields around the cylinder are measured by 3D-PTV technique while the motion of the cylinder forced by the flow field is measured simultaneously with a newly developed motion tracking algorithm(bidirectional tracking algorithm). The cylinder is pendant in the working fluid of a water channel and the surface of the working fluid is forced sinusoidal to make the cylinder bounced. The interaction between the flow fields and the cylinder motion is examined quantitatively.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.687-703
• /
• 2014

This paper develops a new nonlinear model for active control of three-dimensional (3D) irregular building structures. Both geometrical and material nonlinearities with a neuro-controller training algorithm are applied to a multi-degree-of-freedom 3D system. Two dynamic assembling motions are considered simultaneously in the control model such as coupling between torsional and lateral responses of the structure and interaction between the structural system and the actuators. The proposed control system and training algorithm of the structural system are evaluated by simulating the responses of the structure under the El-Centro 1940 earthquake excitation. In the numerical example, the 3D three-story structure with linear and nonlinear stiffness is controlled by a trained neural network. The actuator dynamics, control time delay and incident angle of earthquake are also considered in the simulation. Results show that the proposed control algorithm for 3D buildings is effective in structural control.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.249-250
• /
• 2022

PLA 3D printed capsule of FDM method has advantages of mass production and low cost. However, it has a different strength depending on the direction in witch it is laminated. In this paper, structural design of several capsules, FEM analysis, and Compressive strength tests were conducted. As a result, the proposed capsule has a strong load of up to 217.9% compared to general capsule without a reinforcing structure.

• International Journal of Contents
• /
• 제4권3호
• /
• pp.35-40
• /
• 2008

Recently, almost games are using the 3D environment. Therefore, it required strongly that well-structured 3D engine or tools for development of some complicate 3D applications efficiently. In this paper, we design and implement a 3D engine (PLay engine) using the DirectX 9 SDK of the Microsoft corporation. The PLay engine has independent module structure, which has object oriented characteristics. and has not only 3D rendering functions but efficient algorithms. Moreover, we implement some tools what has compatibility with our engine for convenience. Therefore, it helps development of a 3D application easily and efficiently. We also describe each module with 2-layer structure, and each tool with compatible module, and make a simple game using PLay engine for testify.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.66-72
• /
• 2003

This paper proposes an optimum, problematic design for structural and control systems, taking a 3-D truss structure as an example. The structure is subjected to initial static loads and time-varying disturbances. The structure is controlled by a state feedback H$_{\infty}$ controller which suppress the effects of disturbances. The design variables are the cross sectional areas of truss members. The structural objective function is the structural weight. For the control objective, we consider two types of performance indices, The first function represents the effect of the initial loads. The second function is the norm of the feedback gain, These objective functions are in conflict with each other but are transformed into one control objective by the weighting method. The structural objectives is treated as the constraint, By introducing the second control objective which considers the magnitude of the feedback gain, we can create a design to model errors.

• 한국전자파학회논문지
• /
• 제17권8호
• /
• pp.725-731
• /
• 2006

Feedforward와 defected ground structure(DGS)를 이용한 새로운 주파수 체배기를 제안하였다. 제한된 주파수 체배기는 feedforward 구조에 의해 기본 주파수$(f_0)$가 제거되고, 아령 또는 나선형 모양의 DGS 구조에 의해 2차, 3차 또는 4차의 원하지 않는 고조파 성분들을 제거할 수 있었다. 결국 feedforward와 DGS 구조에 의해서 체배하고자 하는 성분을 제외한 나머지 고조파들이 제거되었다. 기본 주파수를 1 GHz로 하여 주파수 체배기를 설계하고, 측정하였다. 입력 전력을 0dBm으로 하였을 때 2체배기, 3체배기와 4체배기의 출력 전력은 각각 -2.59 dBm, -5.36 dBm과 -4.57 dBm이었다.

• 한국융합학회논문지
• /
• 제12권12호
• /
• pp.169-176
• /
• 2021

본 연구는 파라메트릭 디자인 기반의 3D프린팅 패션제품이 늘어나고 있는 가운데, 3D프린팅 파라메트릭 패션제품의 조형성을 탐구하는 것을 목표로 한다. 연구방법으로, 이론적 고찰을 실시하고 3D프린팅 파라메트릭 패션제품의 조형성을 도출한뒤, 3D프린팅 파라메트릭 패션제품의 사례를 수집하여 의류, 신발, 악세사리 총 3가지 유형으로 살펴보았다. 연구결과, 형태적으로는 자연물을 모티브로한 형태를 확인할 수 있었고, 구조적으로는 경제적인 최적구조와 어셈블리구조, 자연물 구조를 확인하였으며 소재의 경우는 복잡형상 구현을 위한 정밀소재를, 색채의 경우는 단색, 무채색 계열과 자연색조합을 사용한다는 것을 알 수 있었다. 본 연구에서 제시한 3D프린팅 파라메트릭 패션제품의 조형성에 대한 이해를 통해 파라메트릭 기반 패션제품의 확산과 조형적 흐름을 이해하는데 기초자료로 사용되기를 기대한다.