• 한국산림과학회지
• /
• 제80권3호
• /
• pp.265-278
• /
• 1991

지리산국립공원(智異山國立公園)의 도로(道路) 비탈면을 대상(對象)으로 물리적(物理的) 환경(環境)이 지닌 시각적(視覺的) 질(質)을 계량적(計量的) 접근방법(接近方法)으로 분석하여 합리적인 계획(計劃), 설계(設計) 및 보전관리(保全管理)에 필요한 기초자료(基礎資料)를 제시하는 것을 목적(目的)으로, 도로(道路) 비탈면 구성요소의 물리량을 Mesh 분석법(分析法)에 의하여 측정(測定)하였다 또한 심리량 분석(分析)을 위해 S.D Scale을 측정하고 인지분석 Algorithm을 통하여 물리적 환경(環境)의 공간(空間) 이미지 구조(構造)를 밝혔으며, 시각적(視覺的) 선호도(選好度)를 측정하여 결정인자(決定因子) 추출(抽出)과 각(各) 인자(因子) 상호간(相互間) 중요성(重要性)을 규명하였다. Mesh 분석(分析)에 의한 시각량조사(視覺量調査) 결과(結果), 각(各) 지점 공(共)히 이지(裡地)와 암석 비탈면, seed spray 등에 의한 지피식생지(池被植生地), 인공식생지등(人工植生地等)이 상대적으로 높은 측정치를 보였다. 국립공원(國立公園) 도로비탈면의 공간 이미지를 함축하는 변인(變因)은 종합평가(綜合評價) 차원(次元), 공간적(空間的) 차원(次元), 호감성(好感性) 차원(次元), 물리적(物理的) 차원(次元), 개방적(開放的) 차원(次元) 및 품격(品格) 차원(次元) 등 6개 인자군(因子群)으로 분석되었으며, 공간적 차원, 물리적 차원 및 개방성 차원(次元)의 인자가 공간 이미지를 대표하는 인자군으로 나타났다. 비탈면 경관(景觀)에 대한 시각적(視覺的) 선호도(選好度)를 결정(決定)짓는 주요(主要) 설명변수는 비탈면내 구조물의 유지관리정도와 비탈면내의 주변 경관과의 어울림과 조화(調和)로움, 비탈면내 인공식생(人工植生)과 구조물(構造物) 등(等)으로 시각적(視覺的) 선호도(選好度) 결정(決定)의 주요(主要) 설명변수로 나타났다.

• 한국환경복원기술학회지
• /
• 제12권6호
• /
• pp.86-98
• /
• 2009

This study was carried out to investigate vegetation structure and soil properties of Adenophora racemosa population distributed in Jeombongsan, Seoraksan, Odaesan and Dutasan in Gangwon-do, Korea. From August 2007 until September 2009, $2m{\times}2m$ quadrate was established in native area of Adenophora racemosa in order to record a dominants and coverage, and soil factors at 22 sites. It was found that the altitude in the distributed areas for Angelica gigas population was 800 m or more. Adenophora racemosa population was classified into Rhododendron mucronulatum dominant population, Geranium var. hirsutum dominant population, Caret siderosticta dominant population and Aruncus dioicus var. kamtschaticus dominant population. In the site of study, soil pH, electrical conductivity, soil organic matter, available phosphorous, and exchangeable potassium, exchangeable calcium, exchangeable magnesium, exchangeable sodium concentration and total nitrogen were ranged from 5.0~7.1, 0.06~0.65dS/m, 0.96~8.94%, 12.3~32.8mg/kg, 0.12~0.89cmol+/kg, 0.34~10.08cmol+/kg, 0.1~l.4cmol+/kg, 0.02~0.29cmol+/kg and 0~8.4% respectively. According to the results of DCCA, Adenophora racemosa population were distributed in the high available phosphorous and exchangeable potassium, and Rhododendron mucronulatum dominant population was situated on low available potassium and high slope degree, Geranium var. hirsutum dominant population was high altitude, electrical conductivity and exchange magnesium, and Carex siderosticta dominant population and Aruncus dioicus var. kamtschaticus were distributed on high total nitrogen, organic matter, available phosphorous.

• 한국진공학회지
• /
• 제2권2호
• /
• pp.227-235
• /
• 1993

$SbS_{1-x}Se_xI,\;BiS_{1-x}Se_xI,\;Sb_{1-x}Bi_xSI,\;Sb_{1-x}Bi_xSeI,\;SbS_{1-x}Se_xI:Co,\;BiS_{1-x}Se_xI:Co,\;Sb_{1-x}Bi_xSI:Co$, and $Sb_{1-x}Bi_xSeI:Co$ single crystals were grown by the vertical Bridgman method using the ingots. It has been found that these single crystals have an orthorhombic structure and indirect optical transition. The composition dependences of energy gaps are given by $E_g(x)=E_g(0)-Ax+Bx^2$. The impurity optical absorption peaks due to cobalt deped with impurity are attributed to the electron transitions between the split energy levels of $Co^{2+}$ and $Co^{3+}$ ions sited at $T_d$symmetry of the host lattice.

• 한국지반공학회논문집
• /
• 제18권3호
• /
• pp.87-94
• /
• 2002

최근 들어 국내에서는 경제적이고 효율적인 지하굴착공법으로 쏘일네일링 벽체와 지하구조물 외벽을 합벽처리하는 사례가 많아지고 있으며, 이같은 지하외벽 일체식 쏘일네일링 공법은 기존의 지보공법과 비교해 볼 때 굴착면적을 최소화하고 시공성을 개선할 수 있는 특징 이 있다. 또한 지하외벽 일체식 쏘일네일링 공법은 지하외벽의 단면 축소와 지하수에 의한 양압력의 영향에도 대처할 수 있는 장점이 있으나 아직까지는 이에 대한 연구가 미흡하여 보수적으로 설계되고 있는 실정이다. 이를 위해 본 연구에서는 실내모형실험을 통해 전면벽체의 강성에 따른 쏘일네일링 보강토체의 거동 및 네일의 두부에 작용하는 인발력을 분석하여 전면벽체의 강성에 따른 쏘일네일링 벽체의 파괴유형을 규명하고 사용상태 및 한계상태에서의 변위양상 및 네일 두부에서의 인장력 분포를 분석하였다. 또한 전면판의 강성이 쏘일네일링 벽테의 전체 안정성에 미치는 영향을 분석하였으며, 향후 전면벽체의 강성에 따른 지반-네일의 상호작용에 대한 모델개발에 필요한 기초적인 자료를 제공하고자 한다.

• 대한물리치료과학회지
• /
• 제13권4호
• /
• pp.43-62
• /
• 2006

The survey was conducted with participation of the 289 handicapped persons residing at the rural area OOeup-gun in Kyungbook for the period of March 2 - May 31, 2006, to study the nature in general of the handicapped and the boundaries of their need. For the nature in general of the handicapped, the study was done by gender iscrimination, age, marital status, religion, educational level, occupation, monthly income, disability cause, disabled duration, disability type, disability level. For the boundaries of their need, the study was done by demand of financial support, educational demand, demand of voluntary workers, need of rehabilitation and medical treatment, job training, improvement of living conditions, or so. Using the Win.SPSS program, we made a frequency analysis and conclusions on the nature in general of the handicapped and the boundaries of their need on a 2-test. Conclusions are : 1. Nature in general of the handicapped The existence of the handicapped shows high at the age over 51 (71.6%), male-handicapped (65.1%), primary school graduates (62.9%), farming engaging (65.2%), monthly income less than one million Won (80.5%), cause by disease (53.8%), duration more than 10 years (61.6%), disability at level 3 (39.8%), extremity disability (66.4%). 2. Correlation of nature in general with demand of the handicapped a. In demanding the financial support, support for helper’s compensation shows high (p<0.05). In demanding the necessity of voluntary workers, the male-handicapped appears high during the absence of family assistance and the female-handicapped appears differently per week and also appears high during the absence of family assistance (p<0.05). b. In educational demand of the handicapped by their age, the age below 30 demands technical-job training and the age over 31 demands medical education for health care (p<0.01). c. In demanding the financial support by educational level, support for living cost shows high (p<0.05). d. In demanding improvement of living conditions by postnatal cause of disability, improvement of house structure shows high (p<0.05). e. In demanding assistance of voluntary workers by disabled duration, "No Need" shows high in the disabled duration more than 4 years (p<0.05). f. In demanding rehabilitation and medical treatment by disability type, home-visiting treatment, oriental medical treatment and physical therapy show high (p<0.001). g. In educational demand by disability level, medical education for health care shows high (p<0.01).

• 접착 및 계면
• /
• 제9권3호
• /
• pp.20-26
• /
• 2008

형상기억합금(SMA)의 구조는 부가된 온도 혹은 응력에 의해 마텐자이트로부터 오스테나이트로의 변화가 가능하다는 것은 잘 알려져 있다. 형상기억합금섬유의 자체 형상회복력으로 인해 응력과 온도가 적용되는 동안에 응력이나 경화 모니터링 센서 또는 작동기로서 사용되었다. 초탄성 현상은 연속적인 기계적 하중 하에서나 온도변화 중에 응력-변형률 곡선에서 확인되었다. 반복하중 실험을 통해 응력-변형률 곡선에서 나타난 초탄성 현상 구간이 나타나는 응력 이력현상이 발생함을 확인하였다. 이것은 형상기억합금섬유 혹은 에폭시에 함침된 형상기억합금섬유 복합재료가 반복하중으로 계면물성 저하로 인한 형상기억 회복 성능의 저하를 의미한다. 강성도가 큰 에폭시 사용과 형상기억합금섬유의 표면처리 이후 형상기억합금섬유와 에폭시 사이의 계면결합력의 증대에도 불구하고 유사한 불완전한 초탄성을 보여 주었다. 단-형상기억합금섬유/에폭시 복합재료 내부에 남은 잔류 열과 이에 따른 잔류 응력으로 인해 에폭시에 함침된 단-형상기억합금섬유에서는 경화과정에서 불완전한 회복을 나타났다.

• 안보군사학연구
• /
• 통권5호
• /
• pp.241-280
• /
• 2007

This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.

• 디지털융복합연구
• /
• 제14권12호
• /
• pp.323-333
• /
• 2016

본 연구는 일부 여대생의 자아존중감, 무망감, 우울, 통제위치 및 A형행동유형과 취업스트레스간의 관련성을 파악하고 취업스트레스에 미치는 융복합적 영향을 분석하였다. 조사대상은 전북지역에서 임의로 선정된 531명의 여대생으로 하였으며, 자료수집은 2016년 3월 28일부터 4월 29일까지 자기기입식 설문지를 통해 이루어졌다. 위계적다중회귀분석 결과, 자아존중감이 낮을수록, 무망감이 높을수록, 우울이 높을수록, 외적통제위치가 높을수록, A형행동 유행이 높을수록 취업스트레스가 높았으며 이들의 설명력은 43.2%이었다. 공분산 구조분석 결과, 자아존중감, 무망감, 우울, 통제위치 및 A형 행동유형과 취업스트레스의 인과관계가 확인되었다. 이상의 연구결과를 볼 때, 여대생의 취업스트레스를 낮추기 위해서는 자아존중감을 높이고 무망감, 우울, 통제위치 및 A형행동유형을 낮추는 노력이 필요하다. 이러한 결과는 여대생의 취업스트레스를 줄이는 프로그램 및 정책 개발에 활용이 기대된다. 향후연구에서는 취업스트레스에 영향을 미치는 추가요인에 대한 분석이 필요하다.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.432-461
• /
• 1995

The basic principles in the design of Class II amalgam cavity preparations have been modified but not changed in essence over the last 90 years. The early essential principle was "extension for prevention". Most of the modifications have served to reduce the extent of preparation and, thus, increase the conservation of sound tooth structure. A more recent concept relating to conservative Class II cavity preparations involves elimination of occlusal preparation if no carious lesion exists in this area. To evaluate the ideal ClassII cavity preparation design, if carious lesion exists only in the interproximal area, three cavity design conditions were studied: Rodda's conventional cavity, simple proximal box cavity and proximal box cavity with retention grooves. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method. Linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B option, Gap option and R option model) were developed. B option model was assumed perfect bonding between the restoration and cavty wall. Gap option model(Gap distance: $2{\mu}m$) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). R option model was assumed non-connection between the restoration and cavty wall. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as followed. 1. Rodda's cavity form model showed greater amount of displacement with other two models. 2. The stress and strain were increased on the distal marginal ridge and buccopulpal line angle in Rodda's cavity form model. 3. The stress and strain were increased on the central groove and a part of distal marginal ridge in simple proximal box model and proximal box model with retention grooves. 4. With Gap option, Rodda's cavity form model showed the greatest amount of the stress on distal marginal ridge followed by proximal box model with retention grooves and simple proximal box model in descending order. 5. With Gap option, simple proximal box model showed greater amount of stress on the central groove with proximal box model with retention grooves. 6. Retention grooves in the proximal box played the role of supporting the restorations opposing to loads.