• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.211-220
• /
• 1998

수평 전기로에서 $AgGaS_2$ 다결정을 합성하여 HWE 방법으로 $AgGaS_2$ 단결정 박막을 성장하였다. $AgGaS_2$ 단결정 박막을 성잘할 때 증발원과 기판의 온도를 각각 $590^{\circ}C$, $440^{\circ}C$로 성장하였을 때 이중결정 X-선 요동곡선(double crystal X-ray diffraction rocking curve, DCRC)의 반폭치(FWHM)값이 124 arcsec로 가장 작아 최적 성장조건이었다. 상온에서 $AgGaS_2$ 단결정 박막의 광흡수 특성으로부터 에너지 띠간격이 2.61cV였다. Band edge에 해당하는 광전도도 peak의 온도 의존성은 Varshni 관계식으로 설명되었으며, Vaeshni 관계식의 상수값은 Eg(0) = 2.7284eV, $\alpha$= 8.695$\times$10-4 eV/K, $\beta$= 332K 로 주어졌다. 광발광 봉우리는 20K에서 414.3nm(2.9926eV)와 414.1nm(2.7249eV)는 free exciton(Ex)의 upper polariton과 lower polariton인 {{{{{E}`_{x} ^{u} }}}}와 {{{{{E}`_{x} ^{L} }}}}, 423.6nm(2.9269eV)는 bound exciton emission에 의한 I로 관측되었다. 또한 455nm(2.7249eV)의 peak는 donor-acceptor pair(DAP)에 기인하는 광발광 봉우리로 관측되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.175-178
• /
• 2004

The stochiometric mixture of evaporating materials for the $ZnIn_2S_4$ single crystal thin film was prepared from horizontal furnace. To obtain the $ZnIn_2S_4$ single crystal thin film, $ZnIn_2S_4$ mixed crystal was deposited on throughly etched semi-insulating GaAs(100) in the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were $610^{\circ}C$ and $450^{\circ}C$, respectively and the growth rate of the $ZnIn_2S_4$ sing1e crystal thin film was about $0.5\;{\mu}m/hr$. The crystalline structure of $ZnIn_2S_4$ single crystal thin film was investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of $ZnIn_2S_4$ single crystal thin film measured from Hall effect by van der Pauw method are $8.51{\times}10^{17}\;cm^{-3}$, $291\;cm^2/V{\cdot}s$ at $293_{\circ}\;K$, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $ZnIn_2S_4$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}S_O$ and the crystal field splitting ${\Delta}Cr$ were 0.0148 eV and 0.1678 eV at $10_{\circ}\; K$, respectively. From the photoluminescence measurement of $ZnIn_2S_4$ single crystal thin film, we observed free excition $(E_X)$ typically observed only in high quality crystal and neutral donor bound exciton $(D^{o},X)$ having very strong peak intensity The full width at half maximum and binding energy of neutral donor bound excition were 9 meV and 26 meV, respectively, The activation energy of impurity measured by Haynes rule was 130 meV.

• 생물정신의학
• /
• 제14권1호
• /
• pp.5-13
• /
• 2007

Objectives : Depression disturbs the individual life from the loss of productivity to suicide. Furthermore the whole society is also influenced by depression in social and economic areas. Many scientific treatment methods are known to be effective in depression. But in reality more than half of patients with depression prefer self help treatment rather than medically based treatment. For the patients with mild depression and primary physicians, it is reasonable to provide the evidence based self care including self help or alternative treatment. This study is supported by the Korean Health 21 R&D Project for the Depression Center to establish the Korean treatment guideline for depression. Methods : The members of Depression Center including the authors attended the workshops where the methods of evidence based medicine such as literature search, quality evaluation of the articles, making the level of evidence were educated. The professional librarians helped the authors for get the searched articles. Among the total of 354 abstracts of systemic review and 300 abstracts of random controlled trials, 3 systemic reviews and 2 random controlled trials were the main structure of evaluation. Result : Among the 37 self care methods known to be effective for depression, 11 kinds of methods were worth of evaluation. The first step for the self care of mild depression is to use St. John's wort, exercise, bibliotherapy, and light therapy in depression during winter season. Acupuncture, negative ion therapy, massage, relaxation technique are known to be efective with evidence. Music therapy, hypnotherapy, and aromatherapy are known to be effective but until now the evidences is insufficient and further evaluations are needed. Conclusion : Among 11 listed self-care methods, several methods need more evidence especially in Korean situation. Exercise is the most recommendable evidence based self care method in Korea nowadays. St. John's wort is effective with evidence, but it is not the OTC drug in Korea, so it is not recommendable now. For the bibliotherapy, there is no book such as "Feeling Good" in Korea. Only the introductory book about depression is available. Publishing the self help book based upon cognitive behavioral approach or psychodynamic approach is needed. Light therapy is practiced in a few clinics, but not self-help style. Exposure to the sunlight is recommended in the level of commen sense. These self care methods are for the mild patient. Moderate to severe patients with depression should seek the professional treatment.

• 동의생리병리학회지
• /
• 제23권5호
• /
• pp.1193-1198
• /
• 2009

Pulse diagnosis is a central diagnosis method used in traditional Oriental medicine. To standardize and modernize the pulse diagnosis method, it is essential to develop an instrument-based reinterpretation of the clinically used pulse images in terms of the physical quantities such as the strength, period, width, length, and depth of the pulse. As a step towards such standardization, we conducted a clinical study on the floating/sinking pulses based on an automated palpation instrument (3D-MAC, Daeyo Medi, Korea) for 213 female subjects in their 20s and 174 female subjects in their 60s. The floating/sinking pulses are the two representative pulse images depending only on the depth of the pulse, and can be conveniently scaled by the coefficient of the floating-sinking pulse ($C_{fs}{\in}(0,1)$), which represents how strong one should apply the hold-down pressure to obtain the maximal pulse strength. As a result, primarily we found that it tends to appear more floating-like pulse ($C_{fs}{\rightarrow}0$) at Gwan and more sinking-like pulse ($C_{fs}{\rightarrow}1$) at Cheek, at both age groups and at both wrists. This result is consistent with a previous study on the geometrical structure of the blood vessel by an ultrasonograph. Second, the pulse tends to be more sinking-like in the age group of 60s than 20s. Finally, the pulses at the right palpation positions were found to be more sinking-like than the left, at both age groups.

• 공업화학
• /
• 제28권3호
• /
• pp.263-271
• /
• 2017

최근에, 질량분석기술의 폴리머 분석에의 응용은 MALDI-TOF MS 개발 이후 급속도로 발전하였다. 이 리뷰 논문은 현재까지 연구된 MALDI-TOF MS의 폴리머 특성분석에의 응용에 관한 최신 논문을 정리하였다. MALDI-TOF MS는 바이오 폴리머와, 합성 폴리머의 평균분자량 분석, 폴리머의 시퀀스 분석을 통한 구조의 해석, 모노머의 조성분석에까지 이용되고 있다. 엔드그룹의 특성과 농도를 분석하는 연구도 많이 진행되었고, 복잡한 폴리머의 분자량의 분석에는 SEC와 MALDI-TOF MS를 연결한 분석법을 추천한다. MALDI에 tandem MS를 결합한 분석기술이나, 이온 모빌리티를 응용한 질량분석기, TOF-SIMS, MALDI-TOF-Imaging 기술도 급격히 발전하고 있으며, 이의 폴리머 특성분석에의 응용은 별도의 분리기술이 필요 없어 앞으로 더 많이 이용될 것으로 생각된다. 분자량, 시퀀스, 그리고 모노머의 조성을 정확하게 계산해주는 소프트웨어와 고분자량(> 100 kDa)의 분석을 가능하게 해주는 기술이 개발된다면, 폴리머를 연구하는 과학자들에게 MALDI-TOF MS의 이용은 문제점을 해결하고, 목적하는 폴리머를 합성하는 데 중요한 수단이 될 것이다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.35-35
• /
• 2017

How do plants take up water from soils especially when water is scarce in soils? Plants have a strategy to respond to water deficit to manage water necessary for their survival and growth. Plants regulate water transport inside them. Water flows inside the plant via (i) apoplastic pathway including xylem vessel and cell wall and (ii) cell-to-cell pathway including water channels sitting in cell membrane (aquaporins). Water transport across the root and leaf is explained by a composite transport model including those pathways. Modification of the components in those pathways to change their hydraulic conductivity can regulate water uptake and management. Apoplastic barrier is modified by producing Casparian band and suberin lamellae. These structures contain suberin known to be hydrophobic. Barley roots with more suberin content from the apoplast showed lower root hydraulic conductivity. Root hydraulic conductivity was measured by a root pressure probe. Plant root builds apoplastic barrier to prevent water loss into dry soil. Water transport in plant is also regulated in the cell-to-cell pathway via aquaporin, which has received a great attention after its discovery in early 1990s. Aquaporins in plants are known to open or close to regulate water transport in response to biotic and/or abiotic stresses including water deficit. Aquaporins in a corn leaf were opened by illumination in the beginning, however, closed in response to the following leaf water potential decrease. The evidence was provided by cell hydraulic conductivity measurement using a cell pressure probe. Changing the hydraulic conductivity of plant organ such as root and leaf has an impact not only on the speed of water transport across the plant but also on the water potential inside the plant, which means plant water uptake pattern from soil could be differentiated. This was demonstrated by a computer simulation with 3-D root structure having root hydraulic conductivity information and soil. The model study indicated that the root hydraulic conductivity plays an important role to determine the water uptake from soil with suboptimal water, although soil hydraulic conductivity also interplayed.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권10호
• /
• pp.5973-5981
• /
• 2013

At present, the most common cause of cancer-related death in women is breast cancer. In a large proportion of breast cancers, there is the overexpression of human epidermal growth factor receptor 2 (HER2). This receptor is a 185 KDa growth factor glycoprotein, also known as the first tumor-associated antigen for different types of breast cancers. Moreover, HER2 is an appropriate cell-surface specific antigen for passive immunotherapy, which relies on the repeated application of monoclonal antibodies that are transferred to the patient. However, vaccination is preferable because it would stimulate a patient's own immune system to actively respond to a disease. In the current study, several bioinformatics tools were used for designing synthetic peptide vaccines. PEPOP was used to predict peptides from HER2 ECD subdomain III in the form of discontinuous-continuous B-cell epitopes. Then, T-cell epitope prediction web servers MHCPred, SYFPEITHI, HLA peptide motif search, Propred, and SVMHC were used to identify class-I and II MHC peptides. In this way, PEPOP selected 12 discontinuous peptides from the 3D structure of the HER2 ECD subdomain III. Furthermore, T-cell epitope prediction analyses identified four peptides containing the segments 77 (384-391) and 99 (495-503) for both B and T-cell epitopes. This work is the only study to our knowledge focusing on design of in silico potential novel cancer peptide vaccines of the HER2 ECD subdomain III that contain epitopes for both B and T-cells. These findings based on bioinformatics analyses may be used in vaccine design and cancer therapy; saving time and minimizing the number of tests needed to select the best possible epitopes.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.440-453
• /
• 2020

국내 자본시장에서 충청권 지역의 최근의 경제 혹은 재무적인 여건 변화들을 기준으로, 동 지역에 대한 해외 및 국내 투자 규모는 향후에도 지속적으로 증가 할 것으로 예상된다. 이와 같은 전례 없는 변화된 환경을 고려하여, 본 연구에서는 동 지역권 소재 기업들의 가치 제고를 위한 3가지의 주요한 재무적 지표들, 즉, 기업의 수익성, 성장률 및 자본구조에 대한 종합적인 상호 비교 분석을 위하여, 각 재무적 지표들을 구성하고 있는 각각의 요인들이 실증적으로 검정되었다. 실증연구를 수행하기 위한 연구 설정 방법과 관련하여, 검정 결과와 관련하여, 시장 가치 기준의 부채비율, 성장률, 토빈 Q 비율, 사업위험도 그리고 연구개발비 비중 등의 총 5 가지 변수들이 충청권 지역에 속한 기업들의 수익성을 결정하는 유의한 재무적 요인들로서 판명되었다. 또한, 기업 성장률과 자본구조의 재무적 지표들을 분석한 결과, 수익성과 기업 규모의 2가지 변수들이 국내 자본시장 내에서 해당지역과 타 비교지역들 소재의 기업들을 통계적으로 구분하는 유의성있는 요인으로 판명되었다. 본 연구의 결과를 기준으로, 상기 서술된 재무적 지표들에 영향을 줄 수 있는 해당 요인들의 수준을 실무적으로 조정할 경우, 충청권 소재 기업들의 가치 향상에 궁극적으로 기여할 것으로 기대된다.

• 멤브레인
• /
• 제18권1호
• /
• pp.84-93
• /
• 2008

본 연구에서는 기존의 이차전지의 분리막보다 좋은 성능으로 각광받고 있는 PVdF (poly(vinylidene fluoride))에 공극률을 높여 전지의 성능을 향상시켜주는 수용성 고분자인 PEG (Poly(ethylene glycol))를 첨가하여 충전용 리튬 이차전지의 분리막을 상전이 방법으로 제조하였다. 용매인 DMF (N,N-dimethylformamide)에 PVdF-PEG를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 기공은 증류수로 채워진 응고조에서 용매-빈용매 교환으로 형성되어진다. 주사전자현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였고 UTM (universal testing machine)을 이용하여 기계적 물성을 확인하였다. PEG-10의 정체시간 30 s에서 균일한 스폰지 구조를 확인할 수 있었으며, 이는 87%의 뛰어난 공극률을 가지며 인장강도의 경우 PEG-10에서 3.72 MPa로 가장 크게 나타났고, 신장률과 모듈러스 부분에서도 역시 75.45%와 275.27 MPa로 뛰어난 성능을 나타냈다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.