• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.275-286
• /
• 2009

As a government building transferred to the outskirts of a city, it's easy to foresee a doughnut effect from advancement process of the city. In the case of Busan city comparing different cities a doughnut effect is being advanced seriously. To the access method for a city center activation the possibility which there will be a various branch, but in this research we analyzed factors of the stagnation in the public Government building neighboring area. And then made a proposal for the city activation plan by transferring the public Government building, analyze influence to surrounding areas using factor analysis. Hence, the object of this paper is to propose a plan for the activation of existig city and evaluates it which is presented consequently. In the case of Dongrae government office, a problem of the neighboring area and condition of present were surveyed and causes of the stagnation in existing city analyzed. Consequently the important five factors were extracted as follows; 1) historical and the cultural factor, 2) factor of creating the special street, 3) urban planning factor, 4) factor of transferring government office.

• Journal of Korean Biological Nursing Science
• /
• v.3 no.2
• /
• pp.1-20
• /
• 2001

The object of this study was to measure the biocidal effect of povidone on staphylococcus found in tracheal incision site, change following the disinfection frequency and duration, and tolerance to the antibiotics. The data was analysed by percentage and t-test using SAS program. The subjects of this study are 35 tracheostomy patients in and Intensive Care Unite of the hospital located in Daegu city and analysing term was from January 16 to February 26, 2001. The results of this study were as follows. The biocidal effect of povidone on Staphylococcus was strong regardless of time and concentration. Staphylococcus aureus was found on third day and found to be highest concentration on 6th day after disinfection of once/a day. Coagulase negative Staphylococcus was not found from 1st to 3rd day and highest on 4th day after disinfection of once/a day. As to bacteria colonization following the disinfection frequency, twice per day of disinfection was more effective on Staphylococcus aureus than once a day. In tolerance test of Staphylococcus aureus and Coagulase negative Staphylococcus, 72.7% of Staphylococcus aureus showed tolerance in Methicillin, 63.6% in Imipenem, and 37.5% of Coagulase negative Staphylococcus showed tolerance in Methicillin, 12.5% in Imipenem. Both of them do not have any tolerance in Vancomycin. The results of this study can be used as the basis for protection against hospital mediated infection through thorough disinfection. With above results, I suggest the following. First, we should research relation between antiseptics and fungi, virus more deeply. Secondly, all medical personnel should try to protect against the hospital medicated infection. Thirdly, there is a need of training professional disinfection personnel for preventing hospital mediated infection and the progress of nursing science.

• The Journal of Korean Medicine
• /
• v.23 no.3
• /
• pp.200-210
• /
• 2002

Objectives: Dojeckjiyu-tang has been used to treat Hwaseol & Jeokri. The object of this study is examination of the treatment effect of Dojeckjiyu-tang for ulcerative colitis of the mouse descending colon. Methods and Materials : Twenty-one rats were divided into 3 groups and treated as follows: the control group was untreated mice. The UCE group was ulcerative colitis elicited mice. The DJT group was Dojeckjiyu-tang treated mice after ulcerative colitis elicitation. The groups were examined with common morphology, paneth cells in intestinal crypt, absorptive cells and goblet cells in epithelium, cell division in mucose, COX-1 as mucosal protector, COX-2 (which appears to play an important role in inflammation), IL-2R-, ICMA-1-inducing cellular immuno-chainreaction, and the distribution of apoptotic cells. Results: 1. The morphology of colonic mucosa from UCE mice: the disappearance of epithelium and intestinal propria in hemorrhagic erosions were seen, but in the morphology of colonic mucosa from DJT-treated mice, the configuration of epithelium and intestinal propria were the same as normal. 2. The distribution of goblet cells and absorptive cells with microvilli in intestinal propria from UCE mice: a noticeable decrease of goblet cells and absorptive cells with microvilli were seen, but with the distribution of goblet cells and absorptive cells with microvilli in intestinal propria from DJT -treated mice, the configuration of goblet cells and absorptive cells with microvilli were the same as normal. 3. The immunohistochemical stain for BrdD in colonic mucosa and COX-1 in lamina propria from UCE mice: BrdU positive cells and COX-1 positive cells in the region of hemorrhagic erosion disappeared, but in the immunohistochemical stain for BrdU in colonic mucosa and COX-1 in lamina propria from DIT-treated mice, BrdU positive cells and COX-1 positive cells were seen. 4. The immunohistochemical stain for COX-2 in lamina propria, IL-2R-in lamina propria, intestinal propria and submucosa and ICMA-1 in intestinal propria and submucosa from DCE mice: a noticeable increase COX-2, IL-2R-, ICMA-1 positive cells were seen, but in the immunohistochemical stain for COX-2 in lamina propria, IL-2R-in lamina propria, intestinal propria and submucosa and ICMA-1 in intestinal propria and submucosa from DJT-treated mice, a numerical decrease of COX-2, IL-2R-, ICMA-1 positive cells was observed. 5. The distribution of apoptotic cells in epithelium and lamina propria from UCE mice: a noticeable increase of apoptotic cells in region of hemorrhagic erosion was seen, but in the distribution of apoptotic cells in epithelium and lamina propria from DJT-treated mice, a remarkable decrease of apoptotic cells was seen. Conclusions: According to the above results, Dojeckjiyu-tang has a moderate effect on ulcerative colitis in descending colon.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.227-239
• /
• 2008

Processing LiDAR (Light Detection And Ranging) data obtained from ALS (Airborne Laser Scanning) systems mainly involves organization and segmentation of the data for 3D object modeling and mapping purposes. The ALS systems are viable and becoming more mature technology in various applications. ALS technology requires complex integration of optics, opto-mechanics and electronics in the multi-sensor components, Le. data captured from GPS, INS and laser scanner. In this study, digital image processing techniques mainly were implemented to gray level coded image of the LiDAR data for building extraction and superstructures segmentation. One of the advantages to use gray level image is easy to apply various existing digital image processing algorithms. Gridding and quantization of the raw LiDAR data into limited gray level might introduce smoothing effect and loss of the detail information. However, smoothed surface data that are more suitable for surface patch segmentation and modeling could be obtained by the quantization of the height values. The building boundaries were precisely extracted by the robust edge detection operator and regularized with shape constraints. As for segmentation of the roof structures, basically region growing based and gap filling segmentation methods were implemented. The results present that various image processing methods are applicable to extract buildings and to segment surface patches of the superstructures on the roofs. Finally, conceptual methodology for extracting characteristic information to reconstruct roof shapes was proposed. Statistical and geometric properties were utilized to segment and model superstructures. The simulation results show that segmentation of the roof surface patches and modeling were possible with the proposed method.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.376-391
• /
• 1998

Images from satellites will have 1 to 3 meter ground resolution and will be very useful for analyzing current status of earth surface. An image processing system named GeoWatch with more intelligent image processing algorithms has been designed and implemented to support the detailed analysis of the land surface using high-resolution satellite imagery. The GeoWatch is a valuable tool for satellite image processing such as digitizing, geometric correction using ground control points, interactive enhancement, various transforms, arithmetic operations, calculating vegetation indices. It can be used for investigating various facts such as the change detection, land cover classification, capacity estimation of the industrial complex, urban information extraction, etc. using more intelligent analysis method with a variety of visual techniques. The strong points of this system are flexible algorithm-save-method for efficient handling of large size images (e.g. full scenes), automatic menu generation and powerful visual programming environment. Most of the existing image processing systems use general graphic user interfaces. In this paper we adopted visual program language for remotely sensed image processing for its powerful programmability and ease of use. This system is an integrated raster/vector analysis system and equipped with many useful functions such as vector overlay, flight simulation, 3D display, and object modeling techniques, etc. In addition to the modules for image and digital signal processing, the system provides many other utilities such as a toolbox and an interactive image editor. This paper also presents several cases of image analysis methods with AI (Artificial Intelligent) technique and design concept for visual programming environment.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.55-64
• /
• 2017

Purpose Recently, with the spread of SPECT/CT, various image correction methods can be applied quickly and accurately, which enabled us to expect quantitative accuracy as well as image quality improvement. Among them, the Collimator Detector Response(CDR) recovery is a correction method aiming at resolution recovery by compensating the blurring effect generated from the distance between the detector and the object. The purpose of this study is to find out quantitative change depending on the change in detection distance in SPECT/CT images with CDR recovery applied. Materials and Methods In order to find out the error of acquisition count depending on the change of detection distance, we set the detection distance according to the obit type as X, Y axis radius 30cm for circular, X, Y axis radius 21cm, 10cm for non-circular and non-circular auto(=auto body contouring, ABC_spacing limit 1cm) and applied reconstruction methods by dividing them into Astonish(3D-OSEM with CDR recovery) and OSEM(w/o CDR recovery) to find out the difference in activity recovery depending on the use of CDR recovery. At this time, attenuation correction, scatter correction, and decay correction were applied to all images. For the quantitative evaluation, calibration scan(cylindrical phantom, $^{99m}TcO_4$ 123.3 MBq, water 9293 ml) was obtained for the purpose of calculating the calibration factor(CF). For the phantom scan, a 50 cc syringe was filled with 31 ml of water and a phantom image was obtained by setting $^{99m}TcO_4$ 123.3 MBq. We set the VOI(volume of interest) in the entire volume of the syringe in the phantom image to measure total counts for each condition and obtained the error of the measured value against true value set by setting CF to check the quantitative accuracy according to the correction. Results The calculated CF was 154.28 (Bq/ml/cps/ml) and the measured values against true values in each conditional image were analyzed to be circular 87.5%, non-circular 90.1%, ABC 91.3% and circular 93.6%, non-circular 93.6%, ABC 93.9% in OSEM and Astonish, respectively. The closer the detection distance, the higher the accuracy of OSEM, and Astonish showed almost similar values regardless of distance. The error was the largest in the OSEM circular(-13.5%) and the smallest in the Astonish ABC(-6.1%). Conclusion SPECT/CT images showed that when the distance compensation is made through the application of CDR recovery, the detection distance shows almost the same quantitative accuracy as the proximity detection even under the distant condition, and accurate correction is possible without being affected by the change in detection distance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.29-40
• /
• 2005

According as base of digital hologram has been magnified, discussion of compression technology is expected as a international standard which defines the compression technique of 3D image and video has been progressed in form of 3DAV which is a part of MPEG. As we can identify in case of 3DAV, the coding technique has high possibility to be formed into the hybrid type which is a merged, refined, or mixid with the various previous technique. Therefore, we wish to present the relationship between various image/video coding techniques and digital hologram In this paper, we propose an efficient coding method of digital hologram using standard compression tools for video and image. At first, we convert fringe patterns into video data using a principle of CGH(Computer Generated Hologram), and then encode it. In this research, we propose a compression algorithm is made up of various method such as pre-processing for transform, local segmentation with global information of object image, frequency transform for coding, scanning to make fringe to video stream, classification of coefficients, and hybrid video coding. Finally the proposed hybrid compression algorithm is all of these methods. The tool for still image coding is JPEG2000, and the toots for video coding include various international compression algorithm such as MPEG-2, MPEG-4, and H.264 and various lossless compression algorithm. The proposed algorithm illustrated that it have better properties for reconstruction than the previous researches on far greater compression rate above from four times to eight times as much. Therefore we expect that the proposed technique for digital hologram coding is to be a good preceding research.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of Sasang Constitutional Medicine
• /
• v.23 no.3
• /
• pp.391-401
• /
• 2011

1. Objectives: Though the eating habits have improved and the living method has become convenient according to the economic growth thanks to the modern industrialization, because of the lack of exercise, obesity, wrong eating habits and stress etc, various symptoms of disease of adults are on the rise. This is the phenomenon that happens as the eating life has become life in the West along with the inundation of the western culture in our society. In this perspective, there has been many various clinical research that's been proceeded so far about the physical constitution and obesity, but there has been little research on the objective analysis of the clinical research about the alimentotherapy using taeeumjoweetang. 2. Methods: In this research we have checked the weights, fat rates, fat weight, abdominal fat rate, blood pressure, and BMI over the objects of the women that were diagnosed as lunisolar system as their physical constitution, and assessed the paramecium lipid, in-blood antioxidation enzyme and the damage of oxidization in the urine by physical constitution-specific of the body shapes that were determined by BMI. The statistical analysis of the current research was processed by using of SPSS 17.0 program. We have figure out statistical amounts such as the arithmetic average, average deviation rate and percentage number. Fro the verification of he significancy of each elements, we have used the paired t-test, ANOVA, Chi-square test at the level of p<0.05. 3. Results and Conclusions: Their characteristics are age $21.20{\pm}1.35$, height $160.30{\pm}6.11cm$, weight $64.66{\pm}8.72kg$, fat rates are $35.97{\pm}4.87%$, fat amount $23.40{\pm}5.48$, abdominal fat rate $0.823{\pm}0.03$, BMI $25.12{\pm}2.79kg/m^2$, and systolic blood pressure $111.60{\pm}10.28mmHg$ and diastolic blood pressure $68.60{\pm}7.43mmHg$ and we have let them take the medicine twice a day for 8 weeks. The clinical result for the Cholesterol, Triglyceride, HDL-cholesterol, LDL-cholesterol, SGOT, SGPT, of the object people was that for the function of the liver, the result of the SGOT and SGPT test was $17.16{\pm}3.05$, $15.00{\pm}2.99IU/L$, which was a decrease, and had statistical meaning, but for the SGOT, though the figure reduced to $11.92{\pm}4.61$, $10.80{\pm}3.07$, it had no statistical meaning. For the whole cholesterol level, the figure reduced to $169.00{\pm}19.95$, $160.08{\pm}22.52$ mg/dL and had statistical significance(p<0.05). Neuter fat number, Triglyceride has slightly increased to $67.52{\pm}36.32$, $68.08{\pm}47.33$ mg/dL but did not have any statistical meaning. The antioxdant enzyme marker standard marker, SOD has increased to $2.52{\pm}0.73$, $2.86{\pm}0.60U/ml$, and had statistical significance(p<0.01). Catalase also increased by $0.63{\pm}0.18$, $1.07{\pm}0.25mmol/ml$ and had statistical meaning(p<0.01). GPx also increased to $204.76{\pm}32.64$ nmol/ml and had statistical meaning(p<0.01). But, for the Total antioxidant, though it has raised to $1.51{\pm}0.26$, $1.57{\pm}0.17nmol/{\mu}l$, it did not have any statistical meaning. MDA of oxidative stress marker has decreased to $1.70{\pm}0.68{\mu}g/ml$, $1.21{\pm}0.50{\mu}g/m$ and had statistical significance(p<0.01). 8-OHdG also decreased $3.35{\pm}0.95ng/ml$, $2.21{\pm}0.50ng/ml$ and had statistical meaning(p<0.01). In this research, we have analyzed the various markers relating to BFM and changes in oxidative enzyme in blood by takingtaeeumjoweetang. Taeeumjoweetang has the positive effect on inbody antioxidant system and reducing the content of cholesterol, which is proven to help losing weight and improving hyperlipidemia statistically. With this research, we hope to improve the lifestyle of those who are either obese or need to manage their dietary habits, and also to become the touchstone of integrating Oriental Medicine with the science of food & nutrition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.687-692
• /
• 2018

In this paper, the development of an automotive thermal imaging camera providing image information for ADAS (Advanced Driver Assist System) and autonomous vehicles is described and an improved technique to enhance the details of the image is proposed. Thermal imaging cameras are used in various fields, such as the medical, industrial and military fields, for the purpose of temperature measurement and night vision. In automobiles, they are utilized for night vision systems. For their utilization in ADAS and autonomous vehicles, appropriate image resolution and enhanced detail are required for object recognition. In this study, a $640{\times}480$ resolution thermal imaging camera that can be applied to automobiles is developed and the BDE (Block-Range Detail Enhancement) technique is applied to improve the details of the image. In order to improve the image detail obtained in various driving environments, the block-range values between the target pixel and the surrounding 8 pixels are calculated and classified into 5 levels. Then, different factors are added or subtracted to obtain images with high utilization. The improved technique distinguishes the dark part of the image by the resulting temperature difference of 130mK and shows an improvement in the fine detail in both the bright and dark parts of the image. The developed thermal imaging camera using the improved detail enhancement technique is applied to a test vehicle and the results are presented.