• Journal of the Korean Magnetics Society
• /
• v.22 no.3
• /
• pp.91-96
• /
• 2012

In this paper, a three-dimensional finite element model based on the multi-pixel was constructed to accurately predict electric field distributions including an interference phenomenon between adjacent pixels in the liquid crystal of a complicated TFT-LCD panel. Utilizing the elaborate numerical model, the characteristics of spatial electric field distributions depending on various fault-electrode conditions are thoroughly examined on the basis of the field distribution of a normal electrode condition. The validity of the proposed model is proved by comparing the simulation results with those of the existing optical inspection equipments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.75-82
• /
• 2019

Slab panels are very important to develop asphalt concrete (AC) track for minimizing the roadbed stress due to the train load and reducing the plastic deformation of infrared-sensitive AC. In this study, the slab panel for AC track was developed through the shape design and the indoor performance test and its structural integrity has been investigated through the finite element analysis under the flexural tensile stress and the design moment according to various static load combination by KRL-2012 standard train load model and KR-C code. In order to verify the suitability of the slab panel for AC track, static bending strength test and dynamic bending strength test were performed according to EN 13230-2. Results show that the slab panel for AC track satisfies all the performance standards required by European standards such as crack loads and crack extension.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.1-11
• /
• 2009

This paper illustrates a case study of PLC logic simulation in a car manufacturing system. It was developed to simulate and verify PLC control program for automobile panel AS/RS. Because car models become varied, the complexity of supply problem is increasing in the car manufacturing system. To cope with this problem, companies use the AS (automated storage) and RS (retrieval system) but it has logical complexity. Industrial automated process uses PLC code to control the AS/RS, however control information and control codes (PLC code) are difficult to understand. This paper suggests a PLC simulation environment, using 3D models and PLC code with realistic data. Data used in this simulation is based on realistic 3D model and I/O model, using actual size and PLC signals, respectively. The environment is similar to a real factory; users can verify and test the PLC code using this simulation before the implementation of AS/RS. Proposed simulation environment can be used for test run of AS/RS to reduce implementation time and cost.

• Composites Research
• /
• v.33 no.3
• /
• pp.140-146
• /
• 2020

The purpose of this paper is to examine the possibility of weight reduction by changing the partition panel of vehicle from an existing aluminum material to carbon fiber reinforced plastics. Three weaving methods (plain, twill and satin) were used in the manufacture of composite materials, and they were produced and tested to derive their material properties. The analysis model of composite partition panel for torsional conditions was developed and the structural stability and system stiffness were evaluated according to Tsai-Hill failure criteria. With design variables for fiber orientation angles and stacking sequence, evolutional optimal algorithm was performed and as the results, the optimal composite partition panel was designed. In addition, the structural analysis results for strength and specific stiffness were compared with aluminum partition panels and composite partition panels to verify the possibility of weight reduction.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.8-17
• /
• 2022

This paper presents a novel geometric modeling technique to predict the mechanical properties of an aircraft wing's skin-stringer integrated panel. Due to mechanical and adhesive fastening, this panel is vulnerable to stress concentration and debonding, so we designed it to integrate the skin and stringer using three-dimensional woven composites. Geometric modeling was conducted by measuring the geometric parameters of the specimen and defining the pattern of the yarns as functions. We used a weighted average model with iso-strain and iso-stress assumptions to predict the mechanical properties of the panel parts. We then compared the results of a finite element analysis with a compression test to verify the accuracy of our model. Our proposed technique proved to be more efficient than the traditional experimental method for predicting the mechanical properties of skin-stringer integrated panels.

• Composites Research
• /
• v.20 no.4
• /
• pp.42-50
• /
• 2007

This paper describes the results of experiments and numerical simulation studies on the low-velocity impact damage of two different sandwich composite panels for application to bodyshell and floor structure of the BIMODAL tram vehicle. Square test samples of 100mm sides were subjected to low-velocity impact loading using an instrumented testing machine at four impact energy levels. Part of this work presented is focused on the finite element analysis of low-velocity impact response onto a sandwich composite panels. It is based on the application of explicit finite element (FE) analysis codes LS-DYNA 3D to study the impact response of sandwich structures under low-velocity impact conditions. Material testing was conducted to determine the input parameters for the metallic and composite material model, and the effective equivalent damage model for the orthotropic honeycomb materials. Numerical and experimental results showed a good agreement for damage area and the depth of indentation of sandwich composite panels created by the impact loading.

• CDE review
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2015

본 글을 통해 학생들과 함께 수행한 다양한 디지털 디자인 모델을 기반으로 5가지의 디지털 패브리케이션 방식을 적용하여 여러 실제 인테리어패널의 제작 과정 및 그 결과물들을 요약적으로 소개하였다. 해당 과정은 기존의 분리된 설계와 제작 및 시공이 아닌, 설계-제작 통합적인 접근방법을 활용함으로써 학생들로 하여금 디지털 디자인과 패브리케이션의 효과를 극대화 할 수 있음을 체득하도록 하였다. 패브리케이션 기기 및 재료 등의 차이점에 따라 실제 구현된 모델과 원래의 디지털 모델과의 형상적인 차이점은 아직까지 한계점으로 남을 수 있지만, 비정형적으로 생성된 디지털 디자인의 형상이 직접적으로 실현이 가능하다는 점에서 의의가 있다고 할 수 있다. 또한 패러매트릭 모델링 기법이나 실제 제작 경험이 거의 없는 학생들을 대상으로 개별적인 교육이 아닌 설계-제작 통합적인 교육을 실시함으로써 각 요소들이 어떻게 유기적으로 관련되어 디지털 디자인 과정이나 패브리케이션과정에서 상호 보완적으로 중요한지 직접 체득할 수 있도록 하였다는데 의의가 있다. 본 글에서 소개한 재료를 깎는 등의 방식인 "마이너스"의 방식이 아닌 3D프린팅과 같이 재료를 이용해 만들어가는 "플러스"적인 방식 또한 해당 사례에서 수행되었으며 마찬가지로 다양한 특성을 지니고 있으나, 본 글에서는 전자의 방식에 대해 주로 논하였다. 본 글에서 다룬 제작기법뿐만 아니라 3D프린팅 기술의 발전과 보급에 따라 디지털 패브리케이션 역시 다양하게 진보하고 있으며, 팹랩 등을 통한 학교에서의 건축설계 교육도 다양하게 진화하고 있다. 본 사례 및 기타 실험적인 교육과 선도적인 여러 시도를 통해서, 디지털 디자인과 패브리케이션 영역을 확장시켜나가고 해당 기술의 발전에 적극적으로 보조할 수 있는 교육과정을 수립하고 이행하는데 일조 할 수 있기를 희망한다.

• Information Systems Review
• /
• v.25 no.3
• /
• pp.59-81
• /
• 2023

Elderly suicide problem has become worse in South Korea. With a rapid aging of the population, the trend of suicide among the elderly is expected to accelerate, preventing elderly suicide has been considered an important societal problem. Thus, we aim to investigate various factors that explain suicidal ideation and to develop a predictive model for suicidal ideation in the context of elderly people in South Korea. To this end, this study contributes to addressing the elderly suicide problem. By using seven-year panel data from the Korea Welfare Panel Survey, we extract various potential causal factors for elderly suicidal ideation based on interpersonal theory of suicide and social disorganization theory. Then a panel logit model was employed to assess the impacts of potential factors on suicidal ideation and deep learning and machine learning algorithms were used to develop a predictive model for suicidal ideation of elderly people. The results of our study provide practical implications for preventing elderly suicide by identifying causal factors of suicidal ideation and a high suicidal risk group of the elderly. This study sheds light on synergy of mixed methodology and provides various academic implications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.131-134
• /
• 2001

The three-dimensional precision measurement technology for industry product of middle and/or large scale has been developed. Theodolite measurement system which is one of the technology is widely used in aerospace industry. This paper describes measurement method and results for spacecraft structure test model by using the measurement system. And structural stability for STM is desribed through the comparison between design values and measured values.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.9-16
• /
• 2010

In this study, structural analyses were carried out on the composite sandwich panel which was tested under compression loading. In the structural analyses, three types of finite element modelling were considered and linear buckling analysis and nonlinear analysis were performed for each FE-model. Through the analyses, it was found that shell elements for face parts and solid elements for core part were appropriate for the better prediction of the buckling load of the panel. If the material failure of the face is critical than overall buckling of the sandwich panel, the use of one shell element through the thickness direction was suitable in the FE-model for the better predictions of failure location and failure load.