• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.237-247
• /
• 2010

This research was carried out to examine the properties of black charcoal board, in order to find the proper manufacturing condition for the black charcoal-board made of the charcoal. The charcoal in this study was distillated from domestic wood waste, and it were also the purpose of this study to see if the black charcoal-board has the advantageous properties of charcoal as a well-being building material against the sick house problem. Domestic wood waste was consisted of MDF 40%, PB 30%, plywood 15% and wood 15%, respectively. Black charcoal board was produced by hot pressing with following conditions; temperature $170^{\circ}C$, three stage pressing cycle of $40-10-40\;kgf/cm^2$(1min.-2.5min.-5min.) and non formaldehyde adhesives [P15%+M5%:MDI(M), poly vinyl acetate emulsion(P). Fine mixed particle size [#6-12(16.9%), #12-18(16.7%), #12-40(47.2%), #40-60(9.5%), #60-100(5.9%), less than #100(3.8%)] gave better results than larger particle size [over #6(33.8%), #12-18(17.7%), #12-40(37.7%), #40-60(6.4%), #60-100(2.6%), less than #100(1.8%)]. Final moisture content of the mat was best at 36%. Black charcoal-board showed less MOR and IB(internal bond), more WA(water absorption) than that of white charcoal-board. Black charcoal board showed not only the same gas adsorption and dimensional stability as white charcoal board but also good cutting, nailing and drilling for indoor environment systems.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.189-189
• /
• 1982

This study was carried out to determine the possibility of making fiberboard through the dry forming process, utilizing the tannin-like material of the Asplund pulp from the silk worm oak as a binder. The fiberboard was made through paraformaldehyde treatment, spray of NaOH solution and adjustment of mat moisture content, by hot-pressing at $220^{\circ}C$, and 50-6-50kg/$cm^2$ pressure with 6-min. (0.6-1.8-3.6) three-stage pressing cycle. The results are summarized as follows: 1. The modulus of rupture value of fiberboard treated with NaOH solution was greater than that of untreated. The value was increased in proportion to the paraformaldehyde content from I to 5%, but there was no increasing between 5 and 7% paraformaldehyde content. The value became higher along with the increase of mat moisture content from 15% to 25%. 2. The water adsorption of fiberboard treated with NaOH solution was lower than that of untreated. The value was de"creased in proportion to the paraformaldehyde content from 1 to 5%, but there was no decreasing between 5 and 7% paraformaldehyde content.. 3. A good quality fiberboard (modulus of rupture value of about 250kg/$cm^2$) was made through 5% paraformaidehyde treatment and 3% treatment of 10% NaOH solution, when the mat moisture content was 25%. was 25%.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.22-29
• /
• 2005

This research was carried out not only to examine the proper manufacturing condition for white charcoal board in relation to charcoal particle size and final mat moisture content (FMC), but also to maintain the advantageous properties of white charcoal as a well being building material against the sick house problem. Excellent functional white charcoal board was produced with two groups of FMC 20~25% and FMC 36~60%. The latter showed best results among tested samples in two types which are #40-60type-P15%, M5%, FMC 60% and mixed type-P15%, M5%, FMC36% with non formaldehyde adhesives [MDI (M), poly vinyl acetate emulsion (P)] and three stage pressing cycle of 30-10-$30kgf/cm^2$ (1 min.-1.5 min.-6 min.). The former gave highly acceptable results in two types which are #6 over-M15%FMC25% and mixed type-M25%FMC20%. White charcoal board gave excellent in dimensional stability, gas adsorption and far-infrared emission.