• Title/Summary/Keyword: 3 section control

Search Result 657, Processing Time 0.031 seconds

Risk Assessment and Safety Measures for Methanol Separation Process in BPA Plant (BPA 공장의 메탄올 분리공정에서 위험성 평가 및 안전대책)

  • Woo, In-Sung;Lee, Joong-Hee;Lee, In-Bok;Chon, Young-Woo;Park, Hee-Chul;Hwang, Seong-Min;Kim, Tae-Ok
    • Journal of the Korean Institute of Gas
    • /
    • v.16 no.3
    • /
    • pp.22-28
    • /
    • 2012
  • For a methanol separation column of the BPA (Bisphenol A) plant, HAZOP (hazard and operability) assessment was performed and damage ranges were predicted from the accident scenarios for the fire and the explosion. As a result, the damage range of the jet fire was 20 m in the case of rupture of the discharge pipe (50 mm diameter) of safety valve, and that of the flash fire was 267 m in the case of catastrophic rupture. Also, the damage ranges of the unconfined vapor cloud explosion (UVCE) for the rupture of the discharge pipe and for the catastrophic rupture were 22 m and 542 m, respectively. For the worst case of release scenarios, safety measures were suggested as follows: the pressure instruments, which can detect abnormal rise of the internal pressure in the methanol separation column, should be installed by the 2 out of 3 voting method in the top section of the column. Through the detection, the instruments should simultaneously shut down the control and the emergency shut-off valves.

Developement of Small 360° Oral Scanner Embedded Board for Image Processing (소형 360° 구강 스캐너 영상처리용 임베디드 보드 개발)

  • Ko, Tae-Young;Lee, Sun-Gu;Lee, Seung-Ho
    • Journal of IKEEE
    • /
    • v.22 no.4
    • /
    • pp.1214-1217
    • /
    • 2018
  • In this paper, we propose the development of a Small $360^{\circ}$ Oral Scanner embedded board. The proposed small $360^{\circ}$ oral scanner embedded board consists of image level and transfer method changing part FPGA part, memory part and FIFO to USB transfer part. The image level and transmission mode change unit divides the MIPI format oral image received through the small $360^{\circ}$ oral cavity image sensor and the image sensor into low power signal mode and high speed signal mode and distributes them to the port and transfers the level shift to the FPGA unit. The FPGA unit performs functions such as $360^{\circ}$ image distortion correction, image correction, image processing, and image compression. In the FIFO to USB transfer section, the RAW data transferred through the FIFO in the FPGA is transferred to the PC using USB 3.0, USB 3.1, etc. using the transceiver chip. In order to evaluate the efficiency of the proposed small $360^{\circ}$ oral scanner embedded board, it has been tested by an authorized testing institute. As a result, the frame rate per second is over 60 fps and the data transfer rate is 4.99 Gb/second

The Present State and Solutions for Archival Arrangement and Description of National Archives & Records Service of Korea (국가기록원의 기록물 정리기술의 현황과 개선방안)

  • Yoon, Ju-Bom
    • Journal of Korean Society of Archives and Records Management
    • /
    • v.4 no.2
    • /
    • pp.118-162
    • /
    • 2004
  • Archival description in archives has an important role in document control and reference service. Archives has made an effort to do archival description. But we have some differences and problems about a theory and practical processes comparing with advanced countries. The serious difference in a theory is that a function classification, maintenance of an original order, arrangement of multi-level description are not reflected in practical process. they are arranged in shelves after they are arranged by registration order in a unit of a volume like an arrangement of book. In addition, there are problems in history of agency change or control of index. So these can cause inconvenience for users. For improving, in this study we introduced the meaning and importance of arrangement of description, the situation and problem of arrangement of description in The National Archives, and a description guideline in other foreign countries. The next is an example for ISAD(G). This paper has chapter 8, the chapter 1 is introduction, the chapter 2 is the meaning and importance of arrangement of description, excluding the chapter 8 is conclusion we can say like this from the chapter 3 to the chapter 7. In the chapter 3, we explain GOVT we are using now and description element category in situation and problem of arrangement of description in Archives. In the chapter 4, this is about guideline from Archives in U.S.A, England and Australia. 1. Lifecycle Date Requirement Guide from NARA is introduced and of the description field, the way of the description about just one title element is introduced. 2. This is about the guideline of the description from Public Record Office. That name is National Archives Cataloguing Guidelines Introduction. We are saying "PROCAT" from this guideline and the seven procedure of description. 3. This is about Commomon Record Series from National Archives of Australia. we studied Registration & description procedures for CRS system. In the chapter 5, This is about the example which applied ISAD to. Archives introduce description of documents produced from Appeals Commission in the Ministry of Government Administration. In the chapter 6, 7. These are about the problems we pointed after using ISAD, naming for the document at procedure section in every institution, the lack of description fields category, the sort or classification of the kind or form, the reference or identified number, the absence description rule about the details, function classification, multi-level description, input format, arrangement of book shelf, authority control. The plan for improving are that problems. The best way for arrangement and description in Archives is to examine the standard, guideline, manual from archives in the advanced countries. So we suggested we need many research and study about this in the academic field.

Potential of River Bottom and Bank Erosion for River Restoration after Dam Slit in the Mountain Stream

  • Kang, Ji-Hyun;So, Kazama
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.46-46
    • /
    • 2011
  • Severe sediment erosion during floods occur disaster and economic losses, but general sediment erosion is basic mechanism to move sediment from upstream to downstream river. In addition, it is important process to change river form. Check dam, which is constructed in mountain stream, play a vital role such as control of sudden debris flow, but it has negative aspects to river ecosystem. Now a day, check dam of open type is an alternative plan to recover river biological diversity and ecosystem through sediment transport while maintaining the function of disaster control. The purpose of this paper is to verify sediment erosion progress of river bottom and bank as first step for river restoration after dam slit by cross-sectional shear stress and critical shear stress. Study area is upstream reach of slit check dam in mountain stream, named Wasada, in Japan. The check dam was slit with two passages in August, 2010. The transects were surveyed for four upstream cross-sections, 7.4 m, 34 m, 86 m, and 150 m distance from dam in October 2010. Sediment size was surveyed at river bottom and bank. Sediment of cobble size was found at the wetted bottom, and small size particles of sand to medium gravel composed river bank. Discharge was $2.5\;m^3/s$ and bottom slope was 0.027 m/m. Excess shear stress (${\tau}_{ex}$) was calculated for hydraulic erosion by subtracting the values of critical shear stress (${\tau}_{c}$) from the value of shear stress (${\tau}$) at river bottom and bank (${\tau}_{ex}=\tau-{\tau}_c$). Shear stress of river bottom (${\tau}_{bottom}$) was calculated using the cross-sectional shear stress, and bank shear stress (${\tau}_{bank}$) was calculated from the method of Flintham and Carling (1988). $${\tau}_{bank}={\tau}^*SF_{bank}((B+P_{bed})/(2^*P_{bank}))$$ where $SF_{bank}=1.77(P_{bed}/p_{bank}+1.5)^{-1.4}$, B is the water surface width, $P_{bed}$ and $P_{bank}$ are wetted parameter of the bed and bank. Estimated values for ${\tau}_{bottom}$ for a flow of $2.5\;m^3/s$ were lower as 25.0 (7.5 m cross-section), 25.7 (34 m), 21.3 (86 m) and 19.8 (150 m), in N/$m^2$, than critical shear stress (${\tau}_c=62.1\;N/m^2$) with cobble of 64 mm. The values were insufficient to erode cobble sediment. In contrast, even if the values of ${\tau}_{bank}$ were lower than the values for ${\tau}_{bottom}$ as 18.7 (7.5 m), 19.3 (34 m), 16.1 (86 m) and 14.7 (150 m), in N/$m^2$, excess shear stresses were calculated at the three cross-sections of 7.5 m, 34 m, and 86 m distances compare with ${\tau}_c$ is 15.5 N/$m^2$ of 16mm gravel. Bank shear stresses were sufficient for erosion of the medium gravel to sand. Therefore there is potential to erode lateral bank than downward erosion in a flow of $2.5\;m^3/s$. Undercutting of the wetted bank can causes bank scour or collapse, therefore this channel has potential to become wider at the same time. This research is about a potential of sediment erosion, and the result could not verify with real data. Therefore it need next step for verification. In addition an erosion mechanism for river restoration is not simple because discharge distribution is variable by snow-melting or rainy season, and a function for disaster control will recover by big precipitation event. Therefore it needs to consider the relationship between continuous discharge change and sediment erosion.

  • PDF

Prevalence of Anisakid larvae in chum salmon Oncorhynchus keta in Korea (한국산 연어의 아니사키스형 유충의 감염현황)

  • Seo, Jung-Soo;Jun, Eun-Ji;Jung, Sung-Hee;Kim, Myoung-Sug;Park, Myoung-Ae;Lee, Chul-Ho;Han, Myoung-Chul;Kim, Jin-Woo;Jee, Bo-Young
    • Journal of fish pathology
    • /
    • v.23 no.1
    • /
    • pp.123-129
    • /
    • 2010
  • The infestation status of anisakid type larvae was investigated in migrating chum salmon (Oncorhynchus keta), with different condition (captured area, sex, body portion) during 2006~2008. The mean infection number of anisakid larvae per individual female and male fish captured from Namdae river was $98{\pm}27$, $103{\pm}27$, respectively. The mean infection number of anisakid larvae per individual female and male fish captured from the coastal area of Yangyang was $63{\pm}18$ and $108{\pm}17$, respectively. The anisakid larvae were mainly found in abdominal muscles (85%) but only a little in the visceral portion. Two types of anisakid larvae (A. simplex, Contracaecum type) were identified but other anisakid larvae were not detected. To investigate the effect of storing temperature on the viability of anisakid larvae, the section of abdominal muscle were stored at different temperature (room temperature, $4^{\circ}C$, $-20^{\circ}C$, $-80^{\circ}C$). As a result, it was necessary to store at $-20^{\circ}C$ for more than 6 hrs to kill the larvae. The present results revealed that chum salmon caught in Korea are heavily infected with anisakid larvae, mainly in the abdominal muscle, and A. simplex was dominantly found in this study.

Investigation of Minimum Number of Drop Levels and Test Points for FWD Network-Level Testing Protocol in Iowa Department of Transportation (아이오와 주 교통국의 FWD 네트워크 레벨 조사 프로토콜을 위한 최소 하중 재하 수와 조사지점 수의 결정)

  • Kim, Yong-Joo;Lee, Ho-Sin(David);Omundson, Jason S.
    • International Journal of Highway Engineering
    • /
    • v.12 no.4
    • /
    • pp.39-46
    • /
    • 2010
  • In 2007, Iowa department of transportation (DOT) initiated to run the falling weight deflectometer (FWD) network-level testing along Iowa highway and road systems and to build a comprehensive database of deflection data and subsequent structural analysis, which are used for detecting pavement structure failure, estimating expected life, and calculating overlay requirements over a desired design life. Iowa's current FWD networklevel testing protocol requires that pavements are tested at three-drop level with 8-deflection basin collected at each drop level. The test point is determined by the length of the tested pavement section. However, the current FWD network-level program could cover about 20% of Iowa's highway and road systems annually. Therefore, the current FWD network-level test protocol should be simplified to test more than 20% of Iowa's highway and road systems for the network-level test annually. The main objective of this research is to investigate if the minimum number of drop levels and test points could be reduced to increase the testing production rate and reduce the cost of testing and traffic control without sacrificing the quality of the FWD data. Based upon the limited FWD network-level test data of eighty-three composite pavement sections, there was no significant difference between the mean values of three different response parameters when the number of drop levels and test points were reduced from the current FWD network-level testing protocol. As a result, the production rate of FWD tests would increase and the cost of testing and traffic control would be decreased without sacrificing the quality of the FWD data.

Preparation of Alzheimers Animal Model and Brain Dysfunction Induced by Continuous $\beta$-Amyloid Protein Infusion

  • Akio Itoh;Kiyofumi Yamada;Kim, Hyoung-Chun;Toshitaka Nabeshima
    • Toxicological Research
    • /
    • v.17
    • /
    • pp.47-57
    • /
    • 2001
  • Alzheimer's disease (AD) is the most common cause of dementia in the elderly, and its pathology is characterized by the presence of numerous numbers of senile plaques and neurofibrillary tangles. Several genetic and transgenic studies have indicated that excess amount of $\beta$-amyloid protein (A$\beta$) is produced by mutations of $\beta$TEX>$\beta$-amyloid precursor protein and causes learning impairment. Moreover, $A\beta$ has a toxic effect on cultured nerve cells. To prepare AD model animals, we have examined continuous (2 weeks) infusion of $A\beta$ into the cerebral ventricle of rats. Continuous infusion of $A\beta$ induces learning impairment in water maze and passive avoidance tasks, and decreases choline acetyltransferase activity in the frontal cortex and hippocampus. Immunohistochemical analysis revealed diffuse depositions of $A\beta$ in the cerebral cortex and hippocampus around the ventricle. Furthermore, the nicotine-evoked release of acetylcholine and dopamine in the frontal cortex/hippocampus and striatum, respectively, is decreased in the $A\beta$-infused group. Perfusion of nicotine (50 $\mu\textrm{M}$) reduced the amplitude of electrically evoked population spikes in the CA1 pyramidal cells of the control group, but not in those of the $A\beta$-infused group, suggesting the impairment of nicotinic signaling in the $A\beta$-infused group. In fact, Kd, but not Bmax, values for [$^3H$] cytisine binding in the hippocampus significantly increased in the $A\beta$-infused rats. suggesting the decrease in affinity of nicotinic acetylcholine receptors. Long-term potentiation (LTP) induced by tetanic stimulations in CA1 pyramidal cells, which is thought to be an essential mechanism underlying learning and memory, was readily observed in the control group, whereas it was impaired in the $A\beta$-infused group. Taken together, these results suggest that $A\beta$ infusion impairs the signal transduction mechanisms via nicotinic acetylcholine receptors. This dysfunction may be responsible, at least in part, for the impairment of LTP induction and may lead to learning and memory impairment. We also found the reduction of glutathione- and Mn-superoxide dismutase-like immunoreactivity in the brains of $A\beta$-infused rats. Administration of antioxidants or nootropics alleviated learning and memory impairment induced by $A\beta$ infusion. We believe that investigation of currently available transgenic and non-transgenic animal models for AD will help to clarify the pathogenic mechanisms and allow assessment of new therapeutic strategies.

  • PDF

Enfluence of the Number of the Lower Scaffold Limbs in Slender Spindle Form on the Tree Growth and Development of 'Fuji' Apple Trees ('후지' 사과나무 세장방추형에서 하단측지수가 수체생육에 미치는 영향)

  • Park, Moo-Yong;Yang, Sang-Jin;Park, Jeung-Kwan;Choi, Dong-Geun;Kang, In-Kyu
    • Journal of Bio-Environment Control
    • /
    • v.16 no.3
    • /
    • pp.258-263
    • /
    • 2007
  • This study was carried out to investigate the effects of number of the lower scaffold limbs on tree growth, light penetration, fruit yield, and fruit quality in slender spindle in 6-year-old 'Fuji'/M.9 apple trees. With regard to the growth by the numbers of the lower scaffold limbs, the width of the tree was wide and the growth of new shoots was increased when the number of the lower scaffold limbs was five. Compare with other treatments, five lower scaffold limbs showed high light-interception on the upper (150 cm above the ground) and middle (100 cm above the ground) canopy. There was no difference in the total number of the flower buds of the spurs according to the number of scaffold limbs, but the number and cross section area of flower bud on the lower canopy (120 cm above the ground) were increased where the number of the lower scaffold limbs was five. Fruit yield was highest in the treated with five lower scaffold limbs and fruit weight tended to increase where the number of the lower scaffold limbs was five or eight. With regard to fruit quality, there showed no difference in fruit shape index, firmness, acid content, Hunter L and b value according to the location of canopy and the number of the lower scaffold limbs, but the content of soluble solids was highest treated with five lower scaffold limbs. Hunter a value indicating fruit color was found to be highest treated with five lower scaffold limbs whose light interception was highest.

Do Foreign Firms Really Pay Higher Wages Than Local Ones? (외국계 기업이 국내기업보다 실제로 임금을 더 많이 주는가?)

  • Choi, Minsik
    • Journal of Labour Economics
    • /
    • v.29 no.3
    • /
    • pp.1-23
    • /
    • 2006
  • This study investigates the effects of inward foreign direct investment on local workers' wages by focusing on U.S. manufacturing industries for the period from 1987 to 1992. Contrary to public perception that foreign ownership is positively associated with higher wages, previous studies show mixed results. Since most of the previous studies used industry or firm level average wages, they can not control for the impact of individual characteristics on wages. I use two different approaches to control individual characteristics and to implement estimation in this study: (1) One-step estimation with industry-state level of inward foreign direct investments by using individual level data, and (2) Two-step industry characteristic regression approach. The higher presence of foreign firms is associated with higher local wages after workers' observable characteristics are controlled for in the first approach. This effect, however, disappears once workers' industry affiliations and regions are controlled for in cross-section analysis. In a panel data analysis, I did not find any statistically significant positive association between inward FDI activities and industry wage premiums within industry. Further, inward FDI activities appeared to be negatively associated with worker's industry wage premium for workers with more than high school education.

  • PDF

The Effect of a Au Based Bonding Agent Coating on Non-Precious Metals-Ceramic Bond Strength (비귀금속 합금에 적용한 Au Based Bonding Agent가 금속-도재 결합에 미치는 영향)

  • Lee, Jung-Hwan;Ahn, Jae-Seok
    • Journal of dental hygiene science
    • /
    • v.9 no.4
    • /
    • pp.405-412
    • /
    • 2009
  • The purpose of this study investigated the effect of Au coating on adhesion between porcelain matrix and metal substructure interface. Titanium, Ni-Cr alloy and Co-Cr alloy are well known as proper metal for the dental restorations. The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. However, adhesion between dental alloys and porcelain is related to diffusion of oxygen during ceramic firing. The excessive oxidized layers make hard adhesion between dental alloy and ceramic. Ni-Cr and Co-Cr specimens were divided into test and a control group and Titanium specimens were divided into three test groups and a control group. Each group had 20 specimens. The adhesion characteristics of porcelain and metal with Au coating layer and without Au coating layer were observed with scanning electron microscopy(SEM). The adhesion was evaluated by a biaxial flexure test and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that Au coating layer is effective barrier to diffuse oxide layer completely protect non-precious alloys from oxidation during the porcelain firing. The SEM photomicrographs of cross-section specimens showed a smooth interface between Au coating layer and metals and porcelain which suggested proper chemical bonding, and no gap, porosity were observed. The mode of failure was mainly adhesive for Ti tested specimens, but mixed failures with adhesive and cohesive were observed in Ni-Cr and Co-Cr specimens. The adhesion between non-precious metals and porcelain would not be improved by Au coating agent. However, It is suggested that the continuous study is required further investigation and development.

  • PDF