• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.429-436
• /
• 2018

The RCS value of maritime ship is indicator of ship's stealth performance and it should be particularly measured for navy ship to ensure survivability on the battlefield. In the design phase of the navy ship, a RCS prediction should be performed to reduce RCS value and achieve ROC(Required Operational Capability) of the ship through configuration control. In operational phase, the RCS value of the ship should be measured for verifying the designed value and obtaining tactical data to take action against enemy missile. During the measurement of RCS for the ship, ship motion can be affected by roll and pitch in accordance with sea state, which should be analyzed into threat elevation from view point of enemy missile. In this paper, we propose a method to measure and analyze RCS of ship in 3-dimensions using a ship motion measuring instrument and a fixed RCS measurement system. In order to verify the proposed method, we conducted a marine experiment using a test ship in sea environment and compared the measurement data with RCS prediction value which is carried by prediction SW($CornerStone^{TM}$) using CAD model of the ship.

• Journal of Welding and Joining
• /
• v.28 no.3
• /
• pp.42-48
• /
• 2010

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) were welded by a combination of a diode laser and a CNC machining center. Laser beam delivered through the transparent PC and was absorbed in an opaque ABS. Polymers were melted and joined by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead and cross-section were analyzed for weld quality, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was measured to be 3.75mm. The shear strength at the given condition was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in a CNC machining system, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.1-7
• /
• 2015

The study conducted questionnaire analysis to 413 industrial safety field employees in order to examine the necessity and validity of industrial safety field's 17th neo-job classification based on National Competency standards(NCS). As a result, 50.1% of industrial safety management field and 43.3% of industrial health management field answered that classification details of occupational safety and health management field are classified by job(duty) performance. Industrial safety management field recognizes that management and engineering section play a significant role in their work, while industrial health management field recognizes worker's health care and work environment management and overall control of work environment assessment to be significant in their work. Furthermore, industrial safety management field recognizes that separating qualification and foundation of 'construction safety manager', 'chemicals(safety and health) manager', '(toxic)risk assessment evaluator or risk factor manager' to be highly significant. The study is meaningful in that it suggests industrial safety field's qualification items practical in industrial sites.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.22-31
• /
• 2024

The objective of this study was to assess the wear resistance of tooth-colored materials used in crown restoration for primary molars with a chewing simulator. In this study, four groups-three experimental groups and one control group-were included. They consisted of three-dimensional (3D) printed resin crowns (NextDent and Graphy), milled nano-hybrid ceramic crowns (MAZIC Duro), and prefabricated zirconia crowns (NuSmile). Twelve mandibular second molar specimens were prepared from each group. In the wear experiment, 6.0 × 10⁵ cycles were conducted with a force of 50 N, and a 6 mm-diameter steatite ball was used as an antagonist. The amount of wear was calculated by comparing the scan files before and after the chewing simulation using 3D metrology software, and the worn cross-section was confirmed by scanning electron microscopy (SEM). The resin and ceramic groups did not exhibit any statistically significant differences. However, compared to other crown groups, the zirconia crown group demonstrated notably reduced levels of wear (p < 0.05). In SEM images, layers and cracks were observed in the 3D-printed resin crown groups, which differed from those in the other groups.

• Structural Engineering and Mechanics
• /
• v.47 no.6
• /
• pp.819-838
• /
• 2013

This paper summarises the results of an experimental study to investigate the flexural behaviour of reinforced concrete beams strengthened using carbon-fibre reinforced polymer (CFRP) laminate in four-point bending. The experimental parameters included are the reinforcing bar ratio ${\rho}_s$ and preload level. Four bar ratios were selected (${\rho}_s=0.13$ to 0.86%), representing the section of two longitudinal tensile reinforcements, with diameters of 8, 14, 16, and 20 mm in order to reveal the effect of bar ratio on failure load and failure mode. Eight beams that could be considered "full-scale" in size, measuring 200 mm in width, 400 mm in total height and 2300 mm in length, were tested. Three beams were selected with different bar ratios (${\rho}_1$, ${\rho}_2$, ${\rho}_3$), and considered as control specimens (without ), while three other beams identical to the control beams with the same CFRP laminates ratio and a seventh beam with ${\rho}_{min}$ (the lowest bar ratio) were also used. In the second part of the study, two beams with the bar ratio ${\rho}_2$ were preloaded at two levels, 50 and 100% of their ultimate loads, and then repaired. This experimental investigation was consolidated using an analytical model. The experimental and analytical results indicate that the flexional capacity and stiffness of strengthened and repaired beams using CFRP laminate were increased compared to those of control beams, and the behaviour of repaired beams was nearly similar to the undamaged and strengthened beams; unlike the ductility of strengthened beams, which was greatly reduced compared to the control.

• Korean Journal of Biological Psychiatry
• /
• v.9 no.2
• /
• pp.120-128
• /
• 2002

Objectives:The purpose of this study was to develop a cognitive rehabilitation program and to investigate the effect of the program that restores the deficiency of memory, which is necessary to operate on high cognitive function such as problem-solving or judgement, for TBI(traumatic brain injury) patients. Methods:Sixteen TBI patients participated in this study. The inclusion criteria were : 1) aged 18 to 60 ; 2) higher than IQ 80 ; 3) lower than MMSE-K 25 and K-MAS(Korean version of Memory Assessment Scale) 85. We administered our program to an experimental group(N=8) in order to improve attention and memory for 4 weeks(total 12 section). Our program was not administrated to a control group(N=8) for 4 weeks. After administrating this program, we measured MMSE-K and K-MAS for the experimental and control groups. Results:The findings of the study were as follows. 1) the experimental group showed significant improvement on MMSE-K score in comparison with baseline, but the control group did not. 2) the experimental group showed significant improvement on K-MAS score in comparison with baseline, but the control group did not. In particular, among the three subscales of K-MAS, only verbal memory scale revealed significant improvement, while visual and short-term memory scales revealed no differences. Conclusion:Our cognitive rehabilitation program improves cognitive state and memory, particulary verbal memory, for TBI patients. These results imply that our program aids in rehabilitation of basic cognition such as memory which is necessary to operate on high cognitive function such as problem-solving or judgement, for TBI(traumatic brain injury) patients.

• Journal of Oriental Neuropsychiatry
• /
• v.20 no.2
• /
• pp.101-110
• /
• 2009

Objectives : The purpose of this study was to investigate the effects of acupuncture on autonomic nervous system in anxiety patients and normal subjects by using SCR(Skin Conductance Response). Methods : The study group consists of 15 anxiety patients as the experimental group stimulated by verum acupuncture, 15 anxiety patients as the control group stimulated by sharm acupuncture, and 15 normal subjects stimulated by verum acupuncture. We measured GSR of experimental and control group, normal subjects during Working Memory Test and acupuncture stimulation. Results : 1. Measured value of SCR during Working Memory Test was significant different in control group, but it was not significant different in experimental group. 2. SCR value of three groups was significantly decreased during acupuncture stimulated. There was only significantly SCR value change during 0min.-5min, of first acupuncture. The section of the other groups was no significantly different. 3. STAI scores of experimental group and control group were significantly decreased. Conclusions : The study results suggest that acupuncture stimulation and sham acupuncture also effective on activity in the sympathetic nervous system and STAI scores.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.37-43
• /
• 1989

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by suing Rudder fish, Girella punctata(Gray). An experimental tank(360L*50W*55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Eight artificial light sources were prepared by combination of three light bulbs(10W, 60W, 100W) and eight filters. During the experiment water depth was maintained 50cm level in the tank. The tank was marked into six longitudinal sections each being 60cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 60 times every 30 seconds, and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was 2.98 lux(1.90-4.40 lux) at daytime and 298.56 lux(188.44-444.96 lux) at night. The variation of the gathering rate of fish in illumination time was great and irregularly fluctuated, but did not show any definite pattern. It was somewhat difference between daytime and night.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• The Journal of the Korean dental association
• /
• v.58 no.5
• /
• pp.276-283
• /
• 2020

Objectives: The aim of this study was to evaluate the efficacy of CK files as an ultrasonic instrument, and to determine most efficient file size for smear layer removal. Materials and Methods: Thirty-six extracted human mandibular premolars with single, straight root canals and mature apices were mechanically prepared and randomly divided into three groups. Group 1 (Control) underwent conventional needle irrigation, Group 2 (CKS) underwent passive ultrasonic irrigation with a #20 CK file, and Group 3 (CKL) underwent passive ultrasonic irrigation with a #30 CK file. After preparation and irrigation, all teeth were dried and split with a chisel to obtain the mesial and distal half of their roots. Each sample was evaluated using a scanning electron microscope, and data were analyzed using the Kruskal-Wallis and Mann-Whitney rank sum tests (p<0.05). Results: The CKS group showed less debris in the apical third than the other groups (p<0.05). In this section, no significant difference was observed among the other groups. And, there was no significant difference among any groups for the middle third section. Conclusion: This study showed that PUI with #20 CK file removed more smear layer compared to using #30 CK file at the apical third of the root canal.