• Journal of radiological science and technology
• /
• v.13 no.2
• /
• pp.51-51
• /
• 1990

This study was undertaken to observe the effects of $^{60}Co\;{\gamma}-irradiation$ on the cell of spermatogenic epithelium in the testis of the chicken. 16-week-old chicken were provided as an experimental group and compared with control group. The experimental group was divided into a single irradiation (800, 1000, 1200 rads) and into three partial irradiation group (800/3, 1000/3, 1200/3 rads). The morphological changes of epithelial cell of the testis were observed by means of hematoxyline and eosin stain. Microstructure of spermatocyte and sperm was observed by means of semithin section of electron microscopic specimen. The results obstained are summerized as follows. 1. Spermatogonia and sertoli cells were found to be isolated from the basal membrane of seminiferous tubules as dose of $^{60}Co\;{\gamma}-irradiation$ was increased. 2. Spermatocytes of pachytene stage were seperated from the cytotplasmic process of sertoil cell in case of 1000 rads of $^{60}Co\;{\gamma}-irradiation$. 3. Normal arrangement of the cell of spermatogenic epithelium was found in control group and only the partial irradiation group of 800 rads. Vaculation in the seminiferous was pronounced in case of a single irradiation group of 800 rads, but the irradiation group of 1000 rads and 1200 rads were found to be damaged severely in both a single and a partial dose.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.51-56
• /
• 2000

Is this paper, we studied on the automatic speech control system in real-time windows environment using voice recognition. The applied reference pattern is the variable DMS model which is proposed to fasten execution speed and the one-stage DP algorithm using this model is used for recognition algorithm. The recognition vocabulary set is composed of control command words which are frequently used in windows environment. In this paper, an automatic speech period detection algorithm which is for on-line voice processing in windows environment is implemented. The variable DMS model which applies variable number of section in consideration of duration of the input signal is proposed. Sometimes, unnecessary recognition target word are generated. therefore model is reconstructed in on-line to handle this efficiently. The Perceptual Linear Predictive analysis method which generate feature vector from extracted feature of voice is applied. According to the experiment result, but recognition speech is fastened in the proposed model because of small loud of calculation. The multi-speaker-independent recognition rate and the multi-speaker-dependent recognition rate is 99.08% and 99.39% respectively. In the noisy environment the recognition rate is 96.25%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.810-818
• /
• 2021

A leakage current of ESS is classified mainly by the occurrence from a PCS(Power Conditioning System) section and an unbalanced grid current. The reason for the leakage current from the PCS section is a voltage change by IGBT (Insulated Gate Bipolar Transistor) switching and stray capacitance between the IGBT and heatsink. The leakage current caused by the grid unbalanced current flows to the ESS through the neutral line of grid-connected transformer for the ESS with a three limb iron type of Yg-wire connection. This paper proposes a mechanism for the occurrence of leakage current caused by stray capacitance, which is calculated using the heatsink formula, from the aspect of the PCS section and grid unbalance current. Based on the proposed mechanisms, this study presents the modeling of the leakage current occurrence using PSCAD/EMTDC S/W and evaluates the characteristics of leakage currents from the PCS section and grid unbalanced current. From the simulation result, the leakage current has a large influence on the battery side by confirming that the leakage current from the PCS is increased from 7[mA] to 34[mA], and the leakage current from an unbalanced load to battery housing is increased from 3.96[mA] to 10.76[mA] according to the resistance of the housings and the magnitude of the ground resistance.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.468-479
• /
• 2020

The proposed AI processor architecture has high throughput for accelerating the neural network and reduces the external memory bandwidth required for processing the neural network. For achieving high throughput, the proposed super thread core (STC) includes 128 × 128 nano cores operating at the clock frequency of 1.2 GHz. The function-safe architecture is proposed for a fault-tolerance system such as an electronics system for autonomous cars. The general-purpose processor (GPP) core is integrated with STC for controlling the STC and processing the AI algorithm. It has a self-recovering cache and dynamic lockstep function. The function-safe design has proved the fault performance has ASIL D of ISO26262 standard fault tolerance levels. Therefore, the entire AI processor is fabricated via the 28-nm CMOS process as a prototype chip. Its peak computing performance is 40 TFLOPS at 1.2 GHz with the supply voltage of 1.1 V. The measured energy efficiency is 1.3 TOPS/W. A GPP for control with a function-safe design can have ISO26262 ASIL-D with the single-point fault-tolerance rate of 99.64%.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.165-171
• /
• 2002

The thermosyphon has been used as a heat transmission device in the heat recovery of low level energy and cooling for heat generating equipments. Many studies on the working fluids and wicks have been reported to improve the heat transfer efficiency of the thermosyphon. A low temperature heat pipe with acetone is chosen in the present study to compare the heat transfer characteristics due to pouring amount of working fluid, magnitude of power supplied and tilt angles. The thermosyphon made ⵁ$15.88{\times}0.8t{\times}600mm$ of copper, evaporation section 200mm, insulation section 25mm, condensation 375mm. Heat transfer rate of the thermosyphon increase as magnitude of power supplied increase and observe dry out phenomenon at 5~10% of pouring amount of working fluid. So thermosyphon at the 150kJ/s judged to need 12% or more. Heat transfer rate of the thermosyphon have nothing to do with tilt angles. Dry out phenomenon of the thermo syphon makes it possible that a low temperature thermosyphon may be used to control temperature and heat transfer of a system when the critical quantity of a working fluid is supplied in the thermosyphon.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.4
• /
• pp.56-60
• /
• 1986

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by using rock trout, He.'~agrammos otakii (Jordan et starks). An experimental tank (360L x SOW x 55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5 W, 150 W) and seven filters. During the experiment water depth was maintained 50 em level in the tank. The tank was marked into six longitudinal sections each being 60 em long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds. and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was O. 7 lux (0. 5~1. 1 lux) in the daytime and 5. 2/ux (3.2-7.7 lux) at night. The variation of the gathering rate of fish in illumination time was sma II and showed the decreasing trend.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.773-780
• /
• 2020

A 40 nm complementary metal oxide semiconductor carrier-aggregated drive amplifier with high linearity is presented for sub-GHz Internet of Things applications. The proposed drive amplifier consists of two high linear amplifiers, which are composed of five differential cascode cells. Carrier aggregation can be achieved by switching on both the driver amplifiers simultaneously and combining the two independent signals in the current mode. The common gate bias of the cascode cells is selected to maximize the output 1 dB compression point (P1dB) to support high-linear wideband applications, and is used for the local supply voltage of digital circuitry for gain control. The proposed circuit achieved an output P1dB of 10.7 dBm with over 22.8 dBm of output 3rd-order intercept point up to 0.9 GHz and demonstrated a 55 dBc adjacent channel leakage ratio (ACLR) for the 802.11af with -5 dBm channel power. To the best of our knowledge, this is the first demonstration of the wideband carrier-aggregated drive amplifier that achieves the highest ACLR performance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.1
• /
• pp.100-113
• /
• 2017

Snap rolling during hard turning and instability during emergency rising are important features of submarine operation. Hydrodynamics modeling using a high incidence flow angle is required to predict these phenomena. In the present study, a quasi-steady dynamics model of a submarine suitable for high-incidence-angle maneuvering applications is developed. To determine the hydrodynamic coefficients of the model, static tests, dynamic tests, and control surface tests were conducted in a towing tank and wind tunnel. The towing tank test is conducted utilizing a Reynolds number of $3.12{\times}10^6$, and the wind tunnel test is performed utilizing a Reynolds number of $5.11{\times}10^6$. In addition, least squares, golden section search, and surface fitting using polynomial models were used to analyze the experimental results. The obtained coefficients are presented in tabular form and can be used for various purposes such as hard turning simulation, emergency rising simulation, and controller design.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.361-366
• /
• 2018

The present study analyzed the variation factors in inducing a salinity change using the existing observation network in the section between the Nakdong River Estuary Barrage and Changnyeong-Haman Weir, and also examined the seasonal changes in precipitation, salinity, and discharge. Furthermore, this study analyzed the causes of a salinity increase by collecting observational data during a period when abnormal salinity occurred, and further investigated the salinity transfer time in a section of approximately 5.3 km from the Nakdong River Estuary Barrage to Nakdong River Bridge to understand the behavioral characteristics of the salinity moving upstream. The study results would make it possible to control the increase in salinity and block salt water from moving upstream by understanding the salinity variation characteristics according to the discharge amount. This will provide stability in collecting water from various residential, agricultural, and industrial sources through water intake facilities scattered near the Nakdong River Estuary Barrage.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.372-380
• /
• 2019

Objective: To determine the effects of a local injection of leukocyte-platelet-rich plasma (L-PRP) on orthodontic tooth movement in rabbits. Methods: Twenty-three male New Zealand white rabbits were included in a split-mouth design. Tooth movement with a 100-g nickel-titanium closed-coil spring was performed on the maxillary first premolars. L-PRP was injected submucosally at the buccal and lingual areas of the first premolar in one random side of the maxilla and the other side served as the control and received normal saline. The amount of tooth movement was assessed on three-dimensional digital models on days 0, 3, 7, 14, 21, and 28. Histological findings and osteoclast numbers were examined on day 0 as the baseline and on days 7, 14, and 28. Results: The L-PRP group showed significantly greater cumulative tooth movement at all observed periods. However, a significantly higher rate of tooth movement was observed only on days 0-7 and 7-14. The osteoclast numbers were significantly increased in the L-PRP group on days 7 and 14. Conclusions: Local injection of L-PRP resulted in a transient increase in the rate of tooth movement and higher osteoclast numbers.