• 한국추진공학회지
• /
• 제24권4호
• /
• pp.12-24
• /
• 2020

이중목 노즐은 유체 추력벡터제어 분야에서 특히 효과적인 방법이며, 다른 축소부가 종래의 축소-확대 노즐의 확대부에 연결된다. 본 연구에서는 3차원 초음속 직사각형 노즐에서 추력벡터제어 성능에 대한 분사각의 영향을 조사하기 위하여 수치해석을 수행하였다. 5개의 분사각에 대하여 다루었으며, 편향각도, 분사 질량유량비, 시스템 전체 추력비, 전체 피칭 추력효율, 대칭면에서의 마하수 분포와 유선 및 다른 면에서 마하수 분포를 포함하는 임계 성능변화가 정량적으로 그리고 정성적으로 분석되었다. 본 연구의 결과는 특히 전투기 설계자에게 유용한 기술적 자료를 제공한다.

• 한국임상수의학회지
• /
• 제29권3호
• /
• pp.203-206
• /
• 2012

심부전의 치료는 심방의 용적 과부하를 줄이기 위한 이뇨제, 심실 압력 과부하를 줄이기 위한 혈관확장제, 심근의 수축력을 향상시키기 위한 강심제 치료로 이루어진다. 이 중 이뇨제가 개의 심부전 조절에서 가장 중요하다. 하지만 장기간의 이뇨제 사용으로 급성 신부전이나 전해질 이상과 같은 부작용이 발생할 수 있다. 따라서 이 연구는 개에서 부작용이 적으면서 더 나은 이뇨효과를 가지는 생약성분의 이뇨제를 찾기 위해 설계되었다. 5마리의 건강한 개를 대상으로 한 예비실험에서 목통(Akebia quinata Decaisne) 추출물은 경도에서 중등도의 이뇨효과(furosemide 2 mg/kg 용량 효과의 0.3-0.5배의 효력)를 보였으며 혈청화학 수치와 전해질 변동은 거의 없었다. 실험 개체 수가 적고 기간이 충분하지 않지만 이 실험을 통해 심부전 환자에서 furosemide의 사용량을 줄이거나 대체할 수 있는 생약성분의 이뇨제 성분을 발굴하였다.

• 한국화재소방학회논문지
• /
• 제33권3호
• /
• pp.138-142
• /
• 2019

골든타임의 확보 방안으로 충북 청주시에서 시행하는 긴급차 우선신호체계 운영 결과를 분석하였다. 화재현장에 도착하기까지 도로상의 극심한 교통정체, 긴급차 앞으로 끼어드는 차량, 긴급차 길터주기에 비협조적인 차량 등 출동 중에 나타나는 장애요인들은 심각한 상태이다. 이와 같은 도로상의 장애문제를 해결하기 위하여 긴급차 우선신호체계를 도입하는 것은 반드시 필요하다. 2017년 4월부터 2018년 6월까지(1년 2개월, 426일) 출동시간과 날짜, 긴급차의 이동거리와 시간, 교통신호 통제구간과 통과시간, 단축시간 등을 측정하였다. 293개의 출동회수 중 교통이 혼잡하고 출동이 잦은 5개의 구간에서 140개의 선택하였다. 교통신호시스템을 통제한 결과는 놀라웠다. 총괄적으로 신호를 통제하지 않을 때에는 1 km를 주행하는데 3 min 3 s가 결렸지만 신호를 통제하여 긴급차를 우선통행하도록 하는 경우에는 1 km를 1 min 23 s에 주행하여 처음의 45.4% 밖에 걸리지 않았다. 즉 15 min 걸리던 주행시간을 6 min 49 s로 줄인 것이다. 이러한 결과를 볼 때 긴급차 우선신호시스템은 가능한 한 빨리 전국적으로 실시하여야 할 것이다.

• 대한간호학회지
• /
• 제30권5호
• /
• pp.1357-1367
• /
• 2000

The purpose of this quasi-experimental study was to explore the effect of aromatherapy massage on the mood, the milk ejection reflex, and the immunoglobulin A of the breast milk of mothers who gave birth through a Cesarean section delivery. Twenty mothers who had Cesarean section were selected as an experimental group, and twenty-two were in the control group. Lavander and Rosemary oil mixed with Jojova carrier oil was used to massage the back, both axillar and breasts. Aromatherapy massage was done once a day for 20 minutes by the researcher. Each session consisted of 4 minutes for warm-up, 14 minutes for massage and 2 minutes for closure. The levels of IgA within the breast milk was analyzed by an immunoturbidimeter assay (Cobas INTEGRA, Roche, Swiss) before and after aromatherapy massage. Mood and milk ejection reflex were measured by self-reports at the same time. The data were analyzed using SPSS 7.5 and the hypotheses were tested by ANCOVA and the Pearson coefficient correlation. The results were as follows : 1) Score of mood increased significantly after the use of aromatherapy massage. 2) Score of milk ejection reflex increased significantly after the use of aromatherapy massage. 3) Level of IgA of breast milk did not change significantly after the use of aromatherapy massage.4) After the use of aromatherapy massage, there wasn't any correlation among mood, milk ejection reflex, and level of IgA of breast milk. In conclusion, the results suggest that aromatherapy massage is an effective nursing intervention to enhance the mood and the milk ejection reflex and to increase the rate of breastfeeding in the breastfeeding mothers under stresses like a Cesarean section.

• 원예과학기술지
• /
• 제32권6호
• /
• pp.753-761
• /
• 2014

Growth and flowering of Cymbidium 'Red Fire' and 'Yokihi' plants were examined in a greenhouse with cooling systems in summer, and with night interruption (NI) lighting in winter as a forcing culture system. The greenhouse was divided into two sections with separate cooling controls during the summer season. One section was cooled by a mist system (mist), while the other section was cooled by a shade screen (shade). During the winter, the greenhouse was redivided into three sections within each cooling system. Plants were grown with NI either at a low light intensity of $3-7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(LNI) or a high l ight intensity of $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(HNI) u sing h igh-pressure sodium l amps during the 22:00-02:00 HR. The control plants were grown under 9 h short-day condition. NI for 16 weeks and cooling for 9 weeks were employed twice during the 2 years of the experimental period. The air temperature was approximately $2^{\circ}C$ lower in the mist than in the shade and the relative humidity was 80 ${\pm}5%$ in the mist compared to $55{\pm}5%$ in the shade. The daily light integral in the mist section was 48% higher than in the shade section. The time from initial planting to flowering pseudobulb emergence decreased with both LNI and HNI for both cultivars, regardless of the cooling treatments. Under NI conditions, however, between 60% and 1 00% of plants of both cultivars flowered in the mist, whereas no or 20% of 'Red Fire' or 'Yokihi' plants, respectively, flowered in the shade treatment over 2 years. Plants grown under the mist had bigger pseudobulbs than those grown in the shade under both NI treatments. These results show that commercial use of NI in winter and a mist cooling system in summer would decrease crop production time to 2 years and increase profits in Cymbidium forcing culture.

• Korean Journal of Radiology
• /
• 제1권3호
• /
• pp.127-134
• /
• 2000

Objective: To determine the extent to which thin-section and volumetric three-dimensional CT can depict airway reactivity to bronchostimulator, and to assess the effect of different airway sizes on the degree of reactivity. Materials and Methods: In eight dogs, thin-section CT scans were obtained before and after the administration of methacholine and ventolin. Cross-sectional areas of bronchi at multiple levels, as shown by axial CT, proximal airway volume as revealed by three-dimensional imaging, and peak airway pressure were measured. The significance of airway change induced by methacholine and ventolin, expressed by percentage changes in cross-sectional area, proximal airway volume, and peak airway pressure was statistically evaluated, as was correlation between the degree of airway reactivity and the area of airways. Results: Cross-sectional areas of the bronchi decreased significantly after the administration of methacholine, and scans obtained after a delay of 5 minutes showed that normalization was insufficient. Ventolin induced a significant increase in cross-sectional areas and an increase in proximal airway volume, while the effect of methacholine on the latter was the opposite. Peak airway pressure increased after the administration of methacholine, and after a 5-minute delay its level was near that of the control state. Ventolin, however, induced no significant decrease. The degree of airway reactivity did not correlate with airway size. Conclusion: Thin-section and volumetric spiral CT with three-dimensional reconstruction can demonstrate airway reactivity to bronchostimulator. The degree of reactivity did not correlate with airway size.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.185-191
• /
• 1996

The Variation of die bearing is primary way to control the metal flow in hot square die extrusion process. Finite element computations are carried out to assess the influence of die bearing on metal flow and state variables. The finit element method is developed based on ALE description for a rigid-viscoplastic material. Since thermal state computational example, hot square die extrusion with varied die bearing lengths has been analyzed for the profile of a L-section.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.99-104
• /
• 2004

Recently, the old surveying method for acquiring surveying-geo information results had a low economic efficiency and a low dependence of precision because it took much times and high costs. So, we acquired law data by execution of control surveying through Static positioning of DGPS(Ashtech). It is computed plainmetric(X, Y) positioning through postprocessing by Prism S/W. And we computed height(Z) through control surveying by ring-closed leveling surveying. After control surveying execution, we built DEM(Digital Elevation Model) using LDT S/W and accuracy 3D detail surveying by EDM(Electronic Distance Measurement) surveying. The purpose of this study was to yield automated digital mapping and the automated amount of materials using ahead data. The conclusions were as follows; First, we built the automated amount of materials system and got high efficiency about personnel, times and precision. Second, when, people precisely positioned on railroads of a high-speed railroad and used GPS surveying, the result was permitted. Finally, it was possible to draw automated profile and cross-section using the 3D terrain model build with the DEM technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.496-501
• /
• 2003

Computational study is performed to understand the fluidic thrust vectoring control of an axisymmetric nozzle, in which secondary gas injection is made in the divergent section of the nozzle. The nozzle has a design Mach number of 2.0, and the operation pressure ratio is varied to obtain the different flow features in the nozzle flow. The injection flow rate is varied by means of the injection port pressure. Test conditions are in the range of the nozzle pressure ratio from 3.0 to 8.26 and the injection pressure ratio from 0 to 1.0. The present computational results show that, for a given nozzle pressure ratio, an increase of the injection pressure ratio produces increased thrust vector angle, but decreases the thrust efficiency.

• 한국지능시스템학회논문지
• /
• 제10권3호
• /
• pp.260-269
• /
• 2000

The fuzzy and state-feedback control systems have been applied in various areas from non-linear to linear systems. A Fuzzy controller is endowed with control rules and membership function that are constructed on the knowledge of expert, as like intuition and experience. but It is very difficult to obtain the exact values which are the membership function and consequent parameters. though apply back-propagation algorithm to the system, the convergence time a much. Besides, the state-feedback system is most widely used in industry due to its simple control structure and easily able to design the controller. but it is weak in complex system of higher degree and non-linear. In this paper presents the design of a fuzzy switching mode, it these two controllers work at different operation conditions, the advantages of both controller can be retained and the disadvantages can be removed. Between the Fuzzy and the State-feedback controlles, the good outputs are selected by the switching mode. Moreover it is powerful in complex system of higher degree and non-linear. In these sense compared with the state-feedback controller, the performance of the proposed controller was improvedin the section of linearization.