• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.417-422
• /
• 1998

he Reactor Coolant Gas Vent System(RCGVS) design for Ulchin Nuclear Power Plant Units 3&4(UCN 3&4) has been improved from the Yonggwang Nuclear Power Plant Units 3&4(YGN 3&4) based on the evaluation results for depressurization capability tests performed at YGN 3&4. There has been a series of plant safety analyses for Natural Circulation Cooldown(NCC) event and thermo-dynamic analyses with RELAP5 code for the steam blowdown Phenomena in order to optimize the orifice size of UCN 3&4 RCGVS. Baesd on these analyses results, the RCGVS orifice size for UCN 3&4 has been reduced to 9/32 inch from the l1/32 inch for YGN 3&4. The depressurization capability tests, which were performed at UCN 3 in order to verify the FSAR NCC analysis results, show that the RCGVS depressurization rates are being within the acceptable ranges. Therefore, it is concluded that the orificed flow path of UCN 3&4 RCGVS is adequately designed, and can provide the safety-grade depressurization capability required for a safe plant operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.452-455
• /
• 2002

Single crystal 3C-SiC(cubic silicon carbide) thin-films were deposited on Si(100) substrate up to a thickness of $4.3{\mu}m$ by APCVD method using HMDS(hexamethyildisilane) at $1350^{\circ}C$. The HMDS flow rate was 0.5 sccm and the carrier gas flow rate was 2.5 slm. The HMDS flow rate was important to get a mirror-like crystal surface. The growth rate of the 3C-SiC films was $4.3{\mu}m/hr$. The 3C-SiC epitaxical films grown on Si(100) were characterized by XRD, AFM, RHEED, XPS and raman scattering, respectively. The 3C-SiC distinct phonons of TO(transverse optical) near $796cm^{-1}$ and LO(longitudinal optical) near $974{\pm}1cm^{-1}$ were recorded by raman scattering measurement. The heteroepitaxially grown films were identified as the single crystal 3C-SiC phase by XRD spectra$(2{\theta}=41.5^{\circ})$.

• 한국해안·해양공학회논문집
• /
• 제23권4호
• /
• pp.292-303
• /
• 2011

본 연구에서는 현재 전 세계적으로 해안선 회복공법의 주류가 된 연성방어 중 하나인 샌드바이패싱을 위한 새로운 시스템을 제안하고자 한다. 검증을 위하여 경제성을 고려한 연구장비를 설계 및 제작하였다. 본 장비의 모래 토출율 예측은 일반적인 하천준설 시스템에 적용시켜 정류상태에서 시간당 토출된 물과 토사 무게를 측정 분석하는 방법으로 수행했다. 자료의 분석 결과, 본 시스템은 이론치에 약 9.6% 차이로 근접한 618 ton/hr의 토출율을 나타냈다. 본 토사류는 고밀도 흐름으로 가정했을 때 비교적 높은 수준으로 예측이 가능함을 알았다. 현장실험에 의한 토출율을 기초로 모래의 토출부피를 예측하였다. 본 시스템과 동일한 400 HP 엔진, 흡입 파이프 300 mm (12 inch), 토출 파이프 250 mm(10 inch)인 미국 플로리다 South Lake Worth Inlet에 설치되어 있는 고정식 샌드바이패싱 장비는 함미비가 20% 수준이며 토사 토출율이 $110\;m^3/hr$이다. 본 연구에서 제안된 장비의 펌핑 능력은 함미비가 동일할 때, 플로리다 설비와 거의 유사한 토사 효율이 $103\;m^3/hr$로 예측된다. 본 장비는 플로리다에 설치된 고정식이 아니며 친수성을 고려한 이동식 형태이다. 플로리다 South Lake Worth Inlet 설비의 샌드바이패싱 단가는 미화 8~9 달러/$m^3$이다(Brunn, 1993). 본 시스템은 모래량이 적은 경우에 적절하며 이동을 위한 별도의 장비가 필요하지 않으므로 경제적이고 운행을 위해 25~30 l/hr의 경유가 소모된다. 많은 양의 모래이동을 위해 다수의 소형장비를 동시에 운영하는 시스템은 추후 연구대상이 될 것으로 기대된다.

• 대한물리치료과학회지
• /
• 제3권4호
• /
• pp.113-120
• /
• 1996

The purpose of this study was to comparison clinical applied versus theoretical fitness on axillary crutch in human stance phase. Ideal crutch length is defined as the length of the crutch, including accessories, obtained during stance when the crutch tip is 15 cm(about 6inch) lateral and 15 cm(about 6 inch) anterior to the fifth toe and the axillary pad is 5 cm(about 2 inch) below the axillay fold. The participations(volunteers) were 71 inpatients(53 men and 18 women) who have orthopedic and neurological impairment on unilateral and/or bilateral lower extrimities, and mean age was 31.4 year old. Prior to participation, each subject informed the procedures of experiment from researcher and assistant researcher. This measured for axillary crutch using each of the following aspects : (1) length of actual using crutch, (2) length of axillary fold after modified(77% of actual height), (3) angle of elbow flexion after modified(77% of actual height). In order to determine the statistical significance of result, t-test were applied at the 0.05 level of significance. The result were as follows ; 1. There was significant difference between actual crutch and ideal crutch length(77% of actual height)(p<0.05). 2. There was significant difference of length of axillary fold between actual and ideal crutch (77% of actual height)(p<0.05). 3. There was significant difference of angle of elbow flexion between actual and ideal crutch(77% of actual height)(p<0.05).

• 한국진공학회지
• /
• 제11권2호
• /
• pp.113-118
• /
• 2002

대면적 GaAs 웨이퍼의 플라즈마 식각 공정에서 식각 깊이의 좋은 균일도를 얻기 위해 반응기 내의 가스 흐름을 조절하는 진보된 기술을 실험하였다. 유한차분수치법(Finite Difference Numerical Method)은 GaAs 웨이퍼의 건식 식각을 위한 반응기 안의 가스 흐름의 분포를 시뮬레이션하기에 유용한 방법이다. 이 방법을 이용해 시뮬레이션된 자료와 실제의 것이 상당히 일치한다는 것이 $BCl_3/N_2/SF_6/He$ICP플라즈마의 실험 결과로 확인되었다. 대면적 GaAs 웨이퍼의 플라즈마 식각 공정 중에서 포커스 링(focus ring)의 최적화된 위치가 가스 흐름과 식각 균일성을 동시에 향상시키는 것을 이해했다. 반응기와 전극(electrode)의 크기가 변하지 않는 상황에서 샘플을 고정시키는 클램프 배치의 최적화를 통해 100 mm(4 inch) GaAs 웨이퍼에서 가스 흐름의 균일성을 $\pm$1.5 %, 150 mm(6 inch) 웨이퍼에서는 $\pm$3% 이하로 유지시킬 수 있는 것을 시뮬레이션결과에서 확인할 수 있다. 시뮬레이션된 가스 흐름의 균일도 자료와 실제 식각 깊이 분포실험 데이터의 비교로 대면적 GaAs 웨이퍼에서 건식 식각의 뛰어난 균일성을 얻기 위해서는 반응기 내의 가스흐름분포의 조절이 매우 중요함을 확인하였다.

• 전자통신동향분석
• /
• 제33권6호
• /
• pp.12-23
• /
• 2018

In this paper, we review the technical trends of diamond and gallium oxide ($Ga_2O_3$) semiconductor technologies among ultra-wide bandgap semiconductor technologies for harsh environments. Diamond exhibits some of the most extreme physical properties such as a wide bandgap, high breakdown field, high electron mobility, and high thermal conductivity, yet its practical use in harsh environments has been limited owing to its scarcity, expense, and small-sized substrate. In addition, the difficulty of n-type doping through ion implantation into diamond is an obstacle to the normally-off operation of transistors. $Ga_2O_3$ also has material properties such as a wide bandgap, high breakdown field, and high working temperature superior to that of silicon, gallium arsenide, gallium nitride, silicon carbide, and so on. In addition, $Ga_2O_3$ bulk crystal growth has developed dramatically. Although the bulk growth is still relatively immature, a 2-inch substrate can already be purchased, whereas 4- and 6-inch substrates are currently under development. Owing to the rapid development of $Ga_2O_3$ bulk and epitaxy growth, device results have quickly followed. We look briefly into diamond and $Ga_2O_3$ semiconductor devices and epitaxy results that can be applied to harsh environments.

• 한국유체기계학회 논문집
• /
• 제10권1호
• /
• pp.41-48
• /
• 2007

The effect of the upstream flow conditions on the disc stability of the swing check valves was investigated at various upstream flow disturbance sources and distances from the tested check valves. The experimental loop was designed and installed to measure the disc positions, disc back stop load, and differential pressure at flow velocities lot 3 inch and 6 inch swing check valves. The selected disturbance sources are elbow and globe valve. The effect of the disc fluctuation is different depending on the type of disturbance and the distance between the disturbance and the check valve. Disturbances generated by elbow and globe valve located upstream from check valve create greater and more violent disc motion than uniform flow.

• 한국잠사곤충학회지
• /
• 제7권
• /
• pp.27-37
• /
• 1967

본 실험은 공기압력이 잠체생리에 미치는 영향을 알고자 수행되었으며 요약하면 다음과 같다. 1. 잠란 부화에 대하여 미치는 공기압력의 영향은 잠품종간에는 차가 없다. 2. 대기압에서 차가 적은 고압 (1 Pound/inch sguare) 또는 저압 (1 Pound/inch sguare)은 부화를 좋게하나, 압력이 클수록 처리시간이 길수록 부화에 나쁜 영향을 미친다. 3. 압력은 견중, 견층비율, 상견비율에 영향을 미치며 영향을 미치며 대기압에서 차가 클수록 처리시간이 길수록 악영향을 미친다. 4. 압력은 잠아체력을 약화시키며 저압은 특히 해롭다. 5. 잠아조직(잠체, 견사선, 소화기)간에 있어서 지방성분에 현저한 차이가 있으며, 잠체조직에서 견사선으로 이동하는 지방성분은 그 량이 적다. 6. 견형성에 있어서 각성분(탄수화물, 지방, 단백질, 회분)은 서로 밀접한 관계가 있다. 7. 압력은 화아일에 영향을 미치며 저압은 화아시간을 연장, 고압은 단축시킨다. 따라서 자웅간화아일 조절을 압력에 의해 할 수 있다. 8. 잠체생리에 미치는 환경요인은 온도, 습도, 광선뿐만 아니고 압력도 큰 영향을 미친다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.84-88
• /
• 2005

Eye gaze positions evaluation on computer screen uses the human eye as an input device for computer systems is that it gives low resolution. We proposes a method to determine the eye gaze positions on the screen by using two-eye displacements as the information for mapping, and the perspective projection is applied to map the displacements to a position on a computer screen. The experiments were performed on 20 persons and a 17-inch monitor is used with the screen resolution of 1024x768 pixels. Gaze detection error was 3.18 cm (RMS error), with screen is divided into 5x8 and 7x10 positions on a 17-inch monitor. The results showed 100% and 96% correction, respectively.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.188-192
• /
• 2008

We investigated the size effect on quench development in $Au/YBa_2Cu_3O_7$ (YBCO) thin film meander lines on sapphire substrates. The meander lines were fabricated by patterning YBCO films coated with gold layers. The lines were subjected to simulated AC fault current, and immersed in liquid nitrogen during the experiment. After the initial rapid rise, the resistance increased moderately and then slowly. In 4 inch-diameter meander lines, the period during which the resistance increased moderately was considerably longer than in 2 inch-diameter line. Moderate increase of resistance was originated from quench propagation. The film temperature was about 180 K at the point when the propagation was completed. The rate of resistance increase after the quench completion was not affected by the film size.