• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.33-37
• /
• 2009

Manifold could apply stainless steel with light weight and durability to improve fuel efficiency at automotive industry. This study is analyzed and compared by heat transfer and deformation according to the materials of cast iron and stainless steel. The heat transfer at manifold of cast iron at the distribution of heat temperature is more than that of stainless steel. But the value of maximum heat deformation in case of stainless steel is 1.5 times as great as that in case of cast iron. The value of maximum heat equivalent stress in case of stainless steel is 2.7 times as great as that in case of cast iron. This maximum stress at manifold is shown at the part assembled with engine body.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.23-29
• /
• 2000

The objective of this paper is to study burst through the influence of overheating to affect a seamed container using the cookers with different materials and bottom sizes. Following result are drawn from this study; When bottom size of the roast meat had 24cm diameter, the upper part temperature of a seamed container was increased over $40^{\circ}C$. Therefore the cooker material without regard to cooker size had a great influence on the temperature of seamed container. For the natural stone plate which had bottom length 65cm, a seamed container was burst at the cooker temperature $801^{\circ}C$, the surface temperature of a burner $573^{\circ}C$. the upside temperature of seamed container $379^{\circ}C$, the downside temperature of seamed container $236^{\circ}C$ and ambient temperature $34^{\circ}C$. For the cooker of the same bottom area, the stone plate had greater influence on effect of temperature than aluminium cooker. Overheating had a great influence on the seamed container if the bottom or upside diameter of a cooker had been larger than a trivet.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.77-78
• /
• 2019

Organic insulating materials can cause fatal toxic gases when burned, which can lead to human injury. As a combustible material, the risk of fire spreading is great. Therefore, there is a need for a study on the lightweight cured body for the non-combustible inorganic insulation to replace the flammable organic insulation. This study aims to examine the properties of lightweight foamed concrete according to the dilution concentration of animal foaming agent which forms a closed void when foaming as a part of the experiment to examine the utility of the lightweight foamed concrete as an insulating material. Bubbles occupy a large volume of lightweight foam concrete and have a great influence on the properties. Therefore, the stability of the bubble is very important, and as a result of the experiment, it is determined that 3% of the smallest vesicles are prepared at the proper dilution concentration.

• Korean Journal of Radiology
• /
• 제22권3호
• /
• pp.308-323
• /
• 2021

An increasing number of adult congenital heart disease (ACHD) patients continue to require life-long diagnostic imaging surveillance using cardiac CT and MRI. These patients typically exhibit a large spectrum of unique anatomical and functional changes resulting from either single- or multi-stage palliation and surgical correction. Radiologists involved in the diagnostic task of monitoring treatment effects and detecting potential complications should be familiar with common cardiac CT and MRI findings observed in patients with repaired complex ACHD. This review article highlights the contemporary role of CT and MRI in three commonly encountered repaired ACHD: repaired tetralogy of Fallot, transposition of the great arteries after arterial switch operation, and functional single ventricle after Fontan operation.

• Journal of Korean Neurosurgical Society
• /
• 제67권3호
• /
• pp.280-288
• /
• 2024

Brain arteriovenous malformations (bAVMs) are aberrant arteriovenous shunts through a vascular nidus with no intervening capillary beds. They are one of the commonest causes of spontaneous intracranial haemorrhage in children and may be associated with significant morbidity and mortality in cases of rupture. Treatment strategies include microsurgical resection, endovascular embolisation, stereotactic radiosurgery, multimodality treatment with a combination thereof, and particularly in high-grade bAVMs, conservative management. Clinicians involved in treating bAVMs need to have familiarity with the natural history pertaining to bAVMs in terms of risk of rupture, risk factors elevating rupture risk as well as understanding the clinical manifestations of bAVMs. This invited review serves to provide a synthesis on natural history and clinical presentation of bAVMs with particular focus in children to inform decision-making pertaining to management.

• Journal of Korean Neurosurgical Society
• /
• 제64권3호
• /
• pp.321-325
• /
• 2021

Every researcher wants their research to gain more recognition, and this desire is achieved by publishing their article in a journal with higher impact. It is very important to get researchers interested in the Journal of Korean Neurosurgical Society (JKNS). Therefore, the first goal was to promote the publication of papers in our journal. To do this, a table of contents was sent out, and the citation ranking was announced every 2 months. Several efforts have been made to publish good papers. Foreign speakers, who were invited to a conference hosted by the Korean Neurosurgical Society were contacted and politely requested to write a paper addressing their recent research. Domestic and international researchers highly renowned in their fields were also contacted to submit their novel works to our journal. The journal impact factor of our journal has continued to rise for the last 3 years and reached 1.376 in 2019. It can be said that the JKNS is now competitive with other international neurosurgery journals. These achievements were not due to the efforts of the editorial boards alone. This was because our society members have submitted very good papers, and because many of our members have cited the papers published in our journal. We believe that this will continue in the future. The next step of evolution of the JKNS has begun, and this is the beginning of another great development.

• 한국문헌정보학회지
• /
• 제46권2호
• /
• pp.5-28
• /
• 2012

'위대한 저서'는 1952년 브리태니커사에서 서양의 명저를 모아 54권으로 출간한 전집이며, 제2판은 60권으로 구성되어 있다. '위대한 저서'의 제2권과 제3권에는 애들러가 고안한 신토피콘이 포함되어 있다. 신토피콘은 '토픽의 집합'을 의미하는 신조어로써 전집에 포함되어 있는 저작의 위치를 알려주는 토픽색인이다. 본 연구는 '위대한 저서'에 포함되어 있는 신토피콘의 구조와 효용성을 분석하는데 목적이 있다. 신토피콘은 102개의 아이디어 단위(장)로 구성되어 있으며, 각 장은 개요, 토픽 구조, 참조, 상호 참조, 추가 독서자료 목록 등 5개 요소로 구분되어 있다. 이 신토피콘은 참고도서, 교양교육, 탐구 및 연구도구, 다른 자료의 신토피컬 독서 적용, 융복합 교육과정 개발을 위한 도구, 다른 저작의 내용 분석 도구 등의 가치와 효용성이 있다.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.969-982
• /
• 1994

This study was designed to investigate the stress distribution, intensity and force mechanism derived from the MEAW by photoelastic stress analysis of the artificial teeth and surrounding bone composed of photoelastic material(PL-3) The findings of this study were as follows, 1. In case of no elastic on the MEAW with tip back, the moderate stress was observed on the molar and canine area, and the light stress was observed on the other area. 2. In case of the vertical elastic on the plain A.W, and the MEAW without tip back, the great stress was observed on the lateral incisor area, but on the MEAW with tip back, the moderate stress was observed on the anterior area and molar area. 3. In case of the C III elastic on plain A.W., the stress was concentrated on the anterior area hanged by elastic but on the MEAW without tip back, the stress was transmitted equally from the anterior area to the posterior teeth area. On the MEAW with tip back, the great stress was observed on the anterior and molar area. 4. In case of the C III elastic on the plain A.W., the stress was concentrated on the posterior area hanged by elastic but on the MEAW without tip back, the stress was transmitted equally from the posterior area to the anterior area. On the MEAW with tip back, the great stress was observed on the posterior area and the moderate stress was observed on the anterior area.

• 한국물환경학회지
• /
• 제23권1호
• /
• pp.19-26
• /
• 2007

The lab-scale BNR processes fed with Municipal Wastewater Before or After Primary Clarifier (MWBPC or MWAPC) were operated to observe the behavior of particle organic matter in terms of nitrification and denitrification efficiency. As a result of the fractionation of the COD from MWBPC or MWAPC using an aerobic respirometric serum bottle reactor, the total mass of biodegradable organic matter from MWBPC is about 52% greater than the mass from MWAPC. Batch reactors were operated to observe the effect of the Particulate Organic Matter (POM) on substrate utilization for denitrification. Although the consumption of POM for denitrification was observed, the increment of the Specific Denitrification Rate (SDNR) was not great. In terms of the effect of POM on nitrification at different HRTs, activate sludge reactors were operated to determine the optimal HRT when MWBPC and MWAPC were fed relatively. All reactors showed a great organic matter removal efficiency. Reactors fed with MWAPC had obtained the nitrification efficiency above 90% when the HRT of 4 hr, at least, was maintained, while reactors fed with MWBPC had same efficiency when the HRT longer than 5 hr was kept. Three parallel $A^2/O$ systems fed with MWBPC or MWAPC relatively were operated to investigate the effects of POM on BNR processes with varying the HRT of an anoxic reactor. For all systems, the efficiency of organic matter removal and denitrification, respectively, was great and about the same. In case of denitrification efficiency, system with MWAPC had 1.5% lower than system with MWBPC at the same HRT of anoxic reactor of 2 hr, and the increasing the HRT of the anoxic reactor by 1 hr in systems fed with MWBPC resulted in a 3.5% increment. The denitrification rate was similar while the consumption of organic matter in systems fed with MWBPC was higher than system fed with MWBPC. It suggests that POM in MWBPC was not be used significantly as a substrate for denitrification in system with the HRT of 3 hr of an anoxic reactor.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.577-580
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GIS field. Also, the needs for the integration of land and building information are widely increasing for integral-management and its application of various land related information. In this study, it is constructed a 3D information cadastral map model that can make the integral management of land, building, connecting land recorders, building management ledgers, building titles, building pictures, and related attribute information.